• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.549-556
• /
• 2010

Reliable fast working maglev switch is one of the key technologies needed for the maglev system to be commercialized. Switch for the maglev system is large, heavy, complicated, expensive compared with that of the traditional wheel-on-rail system. This paper reports the development of a segmented maglev switch for urban transit maglev system under construction for the 6.1 km long double track maglev commercialization line in Inchon international airport in 2012. Test results along with details of the segmented maglev switch components are reported.

• Magazine of the Korea Concrete Institute
• /
• v.1 no.2
• /
• pp.101-112
• /
• 1989

콘크리트에 선형파괴역할의 적용가능성을 연구한 많은 논문이 발표되었다. 본 논문에서는 CLWL-DCB식편을 이용한 콘크리트의 개구형파괴를 연구하였다. 표면구열길이는 리프리카를 사용하여 직접적인 방법으로 측정하였고, 이 결과은 실험에서 얻은 측정가중과 구열개구변위의 관계곡선을 이용하여 분석하였다. 감계응력강도계수와 감계구열선단위는 Two Parameter 모델을 사용하여 유효구열선단에서 구하였다. LEFM 구열단면과 실험으로 구한 구열단면으로부터 폐쇄압력을 얻기 위하여 중첩법을 적용하여 5종의 균열모델을 평가하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1776-1778
• /
• 1998

KEPCO has been constructing the 765 kV double circuit transmission line since 1997. It is worried that the 765 kV transmission lines make TV interference(Ghost and Blocking) due to high tower and multi sub-conductors. This paper presents the mechanism, the measuring method and the results of TV ghost and blocking measurement using a new TV ghost measurement system in a vehicle which was developed by KEPRI.

• 보존과학연구
• /
• s.26
• /
• pp.41-56
• /
• 2005

A set of horse bit from the Eonnam-ri site consists of three parts, pyo , ham , andinsu , and each part takes a shape of a piece of bar. According to current typological study, the pyo is S type, the insu is two-braided line type, and the outer rim of the ham is double rim type, respectively. According to X-ray test, inlaid design seems to have been decorated on the whole surface of the iron bit, originally. However, inlaid pattern partially remained. While the part of bit stopper is designed with flame pattern, the part of rein joint is designed with cloud pattern. According to XRF and XGT analysis of inlaid material, the content of silver is not more than 50%. The line inlay method making grooves on the surface of iron, then in laying a silver thread into them, and grinding the surface in a direction was adoptedin the manufacture of the iron bit.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.73-82
• /
• 2004

This paper investigates a lightning multi-phase flashover on extra high voltage transmission line, which has influence on power systems very much, by the use of ATP. Especially we validated an arcing horn model represented by the nonlinear inductance and resistance which is the most important on the simulation for a multi-phase flashover. We also study relationships between lightning parameters and flashover phases in 765(㎸) double circuit transmission system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.651-659
• /
• 2007

This paper proposes an improved fault indication algorithm in a distribution automation system. A conventional fault indication method, so called YES-NO algorithm, could generate wrong informations under certain conditions such as line to ground fault, large motor double circuit line. In order to prevent mal-operation of fault indicator, direction of fault current are used as well as magnitude. The feasibility of the proposed algorithm has been testified by computer simulation using Matlab power system toolbox.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.193-201
• /
• 1998

In this paper, the standard Dole, Glover, Khargoneker, and Francis (abbr. : DGKF 1989) H\ulcorner controller (H\ulcornerC) is extended to the nonlinear feedback linearization-H\ulcorner/sliding mode controller (NFL-H\ulcorner/SMC), to tackle the problem of the unmeasurable state variables as in the conventional SMC, to obtain smooth control as the linearized controller in a linear system, and to improve the time-domain performance under a worst scenario. The proposed controller is obtained by combining the H\ulcorner estimator with the nonlinear feedback linearization-sliding mode controller (NFL-SMC) and it does not need to measure all the state variables as in the traditional SMC. The proposed controller is applied as a nonlinear power system stabilizer (PSS) for the improvement of the power system damping characteristics of an single machine infinite bus system (SMIBS) connected through a double circuit line. The effectiveness of the proposed controller is verified by nonlinear time-domain simulation in case of a 3-cycle line-to-ground fault and in case of the parameter variations for the AVR gain K\ulcorner and for the inertia moment M.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.124-130
• /
• 2007

The emphasis of this paper is to find out the changes in length of nose in line with speed improvement and changes of the tendency in the shape of the nose in line with time series based on the Shinkansen vehicle. The length of the nose on the lines of high speed tends to get longer, however there is no proportion between the speed and the nose according to optimal design that was designed to reduce micro-pressure wave and air resistance. The Shinkansen vehicles, according to the shape, can be classified in to an Advanced Paraboloid shape, a Sharp-nosed shape, a Flat-nosed shape and an Organic Double-edged shape and is gradually changing in the trend of diversity and distinction. Hereafter, the design of the nose will be developed better into the design that will comprehend identity of manufacturer, region and culture on the basis of optimized aerodynamic shape.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.147-153
• /
• 1995

In this paper, we propose the position- and size-independent handwritten on-line Korean character recognition system using multilayer neural networks which are trained with error back-propagation learning algorithm and the features of Hanguel consonants and vowels. Starting point, end point, and three vectors from starting point to end point of each stroke of characters inputted from mouse or tablet are applied as inputs of neural networks. If double consonants and vowels are separated by single consonants and vowels, all consonants and vowels have at most four strokes. Therefore, four neural networks learn the consonants and the vowels having each number of strokes. Also, we propose the algorithm of separating the consonants and vowels and constructing a character.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.48-49
• /
• 2001

Cryogenic technology is one of the key technologies for fusion reactor equipped with superconducting coil for plasma confinement. The KSTAR(Korea Superconducting Tokamak Advanced Research)Project is in progress since 1996. Major parameters of the KSTAR tokamak are : major radius 1.8m, minor radius 0.5m, toroidal field 3.5 Tesla and plasma current 2MA with a strongly shaped plasma cross-section and double -null diverter. Considering practical engineering constraints, the KSTAR device is designed for a pulse length of 300 sec in up-graded operation mode but in the initial configuration would provide a pulse length of 20 sec provided by the poloidal coil system in base-line operation mode. The cryogenic system is composed as follows : cold box, helium compressor system, distribution box, helium gas buffer tank, helium gas purifying system, gas recovery system, liquid helium storage dewar, current lead box, current bus line and liquid nitrogen storage tank.