• Journal of Integrative Natural Science
• /
• v.3 no.1
• /
• pp.54-59
• /
• 2010

A stoichiometric mixture of evaporating materials for $ZnIn_2Se_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $ZnIn_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperatures were $630^{\circ}C$ and $400^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $ZnIn_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $9.41{\times}10^{16}cm^{-3}$ and $292cm^2/v{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $ZnIn_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $Eg(T)=1.8622eV-(5.23{\times}10^{-4}eV/K)T^2/(T+775.5K)$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.57-64
• /
• 2000

In this paper, to achieve the constant thrust force of the double side moving-magnet type LDM, the new armature winding of the LDM was proposed so as to restrain the saturation of the center yoke without increasing the mass of LDM. According to analyzing the magnetic flux distribution throughout the air-gap of the LDM, the magnet and winding width (1:0.84) was determined. The 2D finite element analysis was performed for force analysis on air-gap.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2236-2241
• /
• 2008

The surface heat flux of nuclear fuel rod is the most important factor which can affect safety of reactor and fuel. If fuel rod surface heat flux exceeds the CHF(${\underline{C}}ritical$ ${\underline{H}}eat$ ${\underline{F}}lux$), fuel can be damaged. In case of double cooled annular fuel, which is under developing, contains two coolant channels. Therefore, a generated heat in the fuel pellet can move to inner or outer channel and heat flow direction is decided by both sides heat resistance which varied by dimension and material property change which caused by temperature and irradiation. The new program(called DUO) was developed. For the calculation of surface heat flux, a both sides convection by inner/outer coolant, s gap temperature jump and conduction in the fuel are modeled. Especially, temperature and time dependent fuel dimension and material property change are considered during the iteration. A sample calculation result shows that the DUO program has sufficient performance for annular fuel thermal hydraulics design.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1610-1612
• /
• 2005

In this paper, the inductive power collector using electromagnetic induction for vehicle such as the PRT(Personal Rapid Transit) system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power collector is used for the PRT system, which has a large air-gap and demands a large electrical power capability. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding, which was divided in half to increase both output current and output voltage was suggested. Also, a model of power collector and parallel winding structure and a model of concentration/decentralization winding are presented, in addition, the performance of inductive power collector to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.333-338
• /
• 2006

This study is a research on Dual Bore heat pipe to investigate the ability of heat transport ability, heat resistance and difference of heat transport ability according to the type of heat pipes. As the result of this research, we got several conclusions. Each pipe of Dual Bore in one section has a similar heat transfer capability. In the range between $-20^{\circ}C$ and $60^{\circ}C$ the heat transfer capability is double than single bore which was analyzed by menas of GAP program. Heat resistance is below $0.05^{\circ}C$/W at every point, and it tells aluminum-ammonia heat pipes are proper for satellite.

• Korean Journal of Materials Research
• /
• v.30 no.12
• /
• pp.666-671
• /
• 2020

The electronic structure and magnetic properties of chalcopyrite (CH) AlGaAs2 with dopant Mn at 3.125 and 6.25 % concentrations are investigated using first-principles calculations. The CH AlGaAs2 alloy is a p-type semiconductor with a small band-gap. The AlGaAs2:Mn shows that the ferromagnetic (FM) state is the most energetically favorable one. The Mn-doped AlGaAs2 exhibits FM and strong half-metallic ground states.The spin polarized Al(Ga,Mn)As2 state (Al-rich system) is more stable than the (Al,Mn)GaAs2 state (Ga-rich system), which has a magnetic moment of 3.82mB/Mn. The interaction between Mn-3d and As-4p states at the Fermi level dominates the other states.The states at the Fermi level are mainlyAs-4p electrons, which mediate strong interaction between the Mn-3d and As-4p states. It is noticeable that the FM ordering of dopant Mn with high magnetic moment originates from the As(4p)-Mn(3d)-As(4p) hybridization, which is attributed to the partially unfilled As-4pbands. The high FM moment of Mn is due to the double-exchange mechanism mediated by valence-band holes.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.12-17
• /
• 2021

The electronic and magnetic properties for Mn-adsorbed on the chalcopyrite (CH) AlGaP2 semiconductor are investigated by using first-principles FPLMTO method. The clean CH-AlGaP2 without adsorbed Mn is a p-type semiconductor with a direct band-gap. The Mn-adsorbed CH-AlGaP2 exhibits the ferromagnetic state. It is more energetically stable than the other magnetic ones. The interstitial site on P-terminated surface is more energetically favorable one than the Al/Ga-terminated surface, or the other adsorbing sites. In the case of Mn-adsorbed Al/Ga-terminated surface, it is induced a strong coupling between Mn-3d and neighboring P-3p electrons. The holes of partially unoccupied minority Mn-3d state and majority (or minority) Al-3p or P-3p state are induced. Thus a high magnetic moment of Mn is sustained by holes-mediated double-exchange coupling. It is noticeable that the semiconducting and half-metallic characteristics of CH-AlGaP2:Mn thin film is disappeared.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.5
• /
• pp.169-175
• /
• 2022

Scour in a flow field affected by waves, such as river estuaries or shallow waters, is more difficult to predict than scour in a currents. The main issue in predicting the scour around circular files, such as undersea bridges, is the maximum scour depth and the point of occurrence. In the case of two or more adjacent circular piles, the location and depth of maximum scour according to the spacing between piles and the arrangement method show a lot of difference compared to the case of a single pile. In this paper, the KC number are calculated as dimensionless variables representing the strength of the flow. And the correlation between pile gap size and relative scour depth was analyzed.

• The Journal of Industrial Distribution & Business
• /
• v.14 no.5
• /
• pp.19-29
• /
• 2023

Purpose: The hospitality sector is vital to economic development, especially in metropolitan regions, where hotels are a pivotal factor in drawing in leisure and corporate visitors. Despite the potential advantages of urban hotels, there is a gap in empirical studies on the impacts of eco-friendly interior design on hotel appeal and guest behavior. Therefore, this study aims to fill out the research gap. Research design, data and methodology: This study employed a review of the literature systematically as its research design. The study's data collection technique involves exploring peer-reviewed journals through electronic databases like Scopus, and Web of Science. The present author double-checked the quality of instrument for all usable dataset. Results: Prior literature has stated a strong linkage between green interior design in urban hotels and customer behavior and hotel attractiveness. Using environmentally conscious methods, hotels can enhance the quality of their indoor atmosphere, preserve energy and water supplies, and establish a favorable public perception that appeals to environmentally aware consumers, thereby improving their overall experience and contentment. Conclusions: This study concludes that creating indoor spaces with environmental factors in mind could lead to a more enjoyable and beneficial atmosphere for hotel visitors and adopting a sustainability-oriented approach to hotel design and operations could attract potential customers.

• Genomics & Informatics
• /
• v.12 no.3
• /
• pp.80-86
• /
• 2014

Foldback intercoil (FBI) DNA is formed by the folding back at one point of a non-helical parallel track of double-stranded DNA at as sharp as $180^{\circ}$ and the intertwining of two double helixes within each other's major groove to form an intercoil with a diameter of 2.2 nm. FBI DNA has been suggested to mediate intra-molecular homologous recombination of a deletion and inversion. Inter-molecular homologous recombination, known as site-specific insertion, on the other hand, is mediated by the direct perpendicular approach of the FBI DNA tip, as the attP site, onto the target DNA, as the attB site. Transposition of DNA transposons involves the pairing of terminal inverted repeats and 5-7-bp tandem target duplication. FBI DNA configuration effectively explains simple as well as replicative transposition, along with the involvement of an enhancer element. The majority of diverse retrotransposable elements that employ a target site duplication mechanism is also suggested to follow the FBI DNA-mediated perpendicular insertion of the paired intercoil ends by non-homologous end-joining, together with gap filling. A genome-wide perspective of transposable elements in light of FBI DNA is discussed.