• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.260-264
• /
• 2014

We developed a novel double dopant bismuth oxide system with Tb and W. When Tb was doped as a single dopant, a Tb dopant concentration more than 20 mol% was required to stabilize bismuth oxides with a high conductivity cubic structure. High temperature XRD analysis of 25 mol% Tb-doped bismuth oxide (25TSB) confirmed that the cubic structure of 25TSB was retained from room temperature to $700^{\circ}C$ with increase in the lattice parameter. On the other hand, we achieved the stabilization of high temperature cubic phase with a total dopant concentration as low as ~12 mol% with 8 mol% Tb and 4 mol% W double dopants (8T4WSB). Moreover, the measured ionic conductivity of 10T5WSB was much higher than 25TSB, thus demonstrating the feasibility of the double dopant strategy to develop stabilized bismuth oxide systems with higher oxygen ion conductivity for the application of SOFC electrolytes at reduced temperature. In addition, we investigated the long-term stability of TSB and TWSB electrolytes.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.138-139
• /
• 2011

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.351-352
• /
• 2008

A new high efficient red PhOLED using a host of $Bebq_2$ and double dopants of $(pq)_2$Ir(acac) and SEC-R411 have been fabricated and evaluated. The device doubly doped with $(pq)_2$Ir(acac) and SFC-R411 showed the current efficiency improvement of 22% under a luminance of 10000 cd/$m^2$ in comparision with the device singly doped with SFC-R411. The luminance, current efficiency and central wavelength of the doubly doped device were 9300 cd/$m^2$ at 7V, 11.1 cd/A under a luminance of 10000 cd/$m^2$ and 625 nm, respectively.

• Journal of information and communication convergence engineering
• /
• 제16권1호
• /
• pp.43-47
• /
• 2018

The existing modeling of avalanche dominated breakdown in double gate MOSFETs (DGMOSFETs) is not relevant for 10 nm gate lengths, because the avalanche mechanism does not occur when the channel length approaches the carrier scattering length. This paper focuses on the punch through mechanism to analyze the breakdown characteristics in 10 nm DGMOSFETs. The analysis is based on an analytical model for the thermionic-emission and tunneling currents, which is based on two-dimensional distributions of the electric potential, obtained from the Poisson equation, and the Wentzel-Kramers-Brillouin (WKB) approximation for the tunneling probability. The analysis shows that corresponding flat-band-voltage for fixed threshold voltage has a significant impact on the breakdown voltage. To investigate ambiguousness of number of dopants in channel, we compared breakdown voltages of high doping and undoped DGMOSFET and show undoped DGMOSFET is more realistic due to simple flat-band-voltage shift. Given that the flat-band-voltage is a process dependent parameter, the new model can be used to quantify the impact of process-parameter fluctuations on the breakdown voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.116-119
• /
• 1997

In this paper A double-layer organic electroluminescent(EL) device was fabricated using a TPD(N,N'-dipheny] -N,N'-bis(3-methylphenyl)-[1,1'-biphenyl]-4.4'-diamine: aromatic diamine), as a hole-transport material and tris (8-hydroxy quinolinate) aluminum(Alq$_3$) as a an emiting material and its performance characteristics were investigated. structure of devices is ITO/TPD/Alq$_3$/Al. we have fabricated hole transport layer of two types. Doping material of Hole Transport material is Poly(methyl methacrylate)(PMMA) and PEI(Poly-Ether-Imide). Carrier injection from the electrodes to the doped PMMA and PEI layer through the dopants and concomitant electroluminescence from Alq$_3$were observed. Green emission with luminance of 40cd/m$^2$was achieved at a drive voltage of 30V

• 한국재료학회지
• /
• 제26권3호
• /
• pp.117-122
• /
• 2016

White organic light-emitting diodes with a structure of indium-tin-oxide [ITO]/N,N-diphenyl-N,N-bis-[4-(phenylm-tolvlamino)-phenyl]-biphenyl-4,4-diamine [DNTPD]/[2,3-f:2, 2-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile [HATCN]/1,1-bis(di-4-poly-aminophenyl) cyclo -hexane [TAPC]/emission layers doped with three color dopants/4,7-diphenyl-1,10-phenanthroline [Bphen]/$Cs_2CO_3$/Al were fabricated and evaluated. In the emission layer [EML], N,N-dicarbazolyl-3,5-benzene [mCP] was used as a single host and bis(2-phenyl quinolinato)-acetylacetonate iridium(III) [Ir(pq)2acac]/fac-tris(2-phenylpyridinato) iridium(III) $[Ir(ppy)_3]$/iridium(III) bis[(4,6-di-fluoropheny)-pyridinato-N,C2] picolinate [FIrpic] were used as red/green/blue dopants, respectively. The fabricated devices were divided into five types (D1, D2, D3, D4, D5) according to the structure of the emission layer. The electroluminescence spectra showed three peak emissions at the wavelengths of blue (472~473 nm), green (495~500 nm), and red (589~595 nm). Among the fabricated devices, the device of D1 doped in a mixed fashion with a single emission layer showed the highest values of luminance and quantum efficiency at the given voltage. However, the emission color of D1 was not pure white but orange, with Commission Internationale de L'Eclairage [CIE] coordinates of (x = 0.41~0.45, y = 0.41) depending on the applied voltages. On the other hand, device D5, with a double emission layer of $mCP:[Ir(pq)_2acac(3%)+Ir(ppy)_3(0.5%)]$/mCP:[FIrpic(10%)], showed a nearly pure white color with CIE coordinates of (x = 0.34~0.35, y = 0.35~0.37) under applied voltage in the range of 6~10 V. The luminance and quantum efficiency of D5 were $17,160cd/m^2$ and 3.8% at 10 V, respectively.

• 멤브레인
• /
• 제13권3호
• /
• pp.162-173
• /
• 2003

폴리아닐린(polyaniline, PANI)과 도판트인 camphorsulfonic acid(CSA), dodecyl benzene sulfonic acid(DBSA)와 의몰비 변화에 따라 가상 n형 PANI을 제조하였다. FT-IR측정으로부터 도핑유무를 확인하였고, indium thin oxide(ITO)에 코팅하여 제조한 전극에 대해, 순환전압전류법과 교류임피던스법을 이용하여 도판트의 영향을 조사하였다. FT-IR과 순환전압전류법으로부터, 제조된 전극이 양이온의 도핑-탈도핑이 일어나는 가상 n형의 특성을 가짐을 확인하였다. 순환전압전류법에서 산화-환원 피크전류값은 PANI/DBSA에 비하여 PANI/CSA가 약 5 배정도 더 큰 결과를 보였다. 교류임피던스법으로부터, 두 전극 모두 이상적인 Randles의 등가회로와 유사한 거동을 보였다. 전하이동저항은 PANI/CSA에서 $1.14~1.09 k{\Omega}$으로 거의 일정한 값을 보였고, PANI/DBSA는 DBSA 몰 비에 증가에 따라 $27.73{\sim}8.37K{\Omega}$으로 감소하여 나타났다. 이중층용량 또한 PANI/CSA는 $13.47{\sim}14.59 {\mu}F$으로 거의 일정하였으나, PANI/DBSA는 DBSA 몰 비 증가에 따라 $0.49{\sim}l.20 {\mu}F$으로 증가를 보였다. 결과적으로 PANI/CSA의 전기적 특성이 더 좋았으나, 도판트의 몰 비 증가에 따른 특성은 PANI/CSA 전극은 거의 일정하였고, PANI/DBSA 전극은 전기적 활성이 좋아짐을 알 수 있었다.

• 대한화학회지
• /
• 제42권6호
• /
• pp.664-671
• /
• 1998

유기 전도성 고분자들중 전도성이 뛰어나고 전기화학적으로 중합이 용이하며 안정성이 뛰어난 피로고분자(ppy)는 산화-환원 활성자리에 회합되는 이온종에 따라서 피막의 형태학적 구조가 다양하다. 그러나 공기중에서 쉽게 노화하며 잘 부서지고 물과 친하지 않은 단점이 있다. 이를 개선하기 위하여 이 다공성 ppy 피막에 높은 개시전위를 갖는 퓨란고분자(pfu)를 끼워심기 중합한 Pt/ppy/pfu(x)전극을 제작하여 그 전기화학적 성질들을 순환전압전류법과 전기호학적 임피던스법으로 조사하였다. 이 때 사용된 도판트 이온은 $PF_6^-,\; BF_4^-$, 그리고 $ClO_4^-$이온 이였으며, pfu의 조성은 ppy에 대하여 0∼1.10 범위였는데 그 조성이 0.1∼0.2의 범위에 있을 때 가장 좋은 산화환원 특징을 나타냈다. 또, $PF_6^-$ 이온이 도우핑되었을 때 전하전달 저항은 다른 이온들로 중합된 것에 비하여 40배정도 낮았으며, 이 중층의 용량은 다른 두 종에 비하여 20배정도 큰 값을 보였다. 전하전달은 주파수의 변화에 영향을 받으며 물질전달에 의한 Warburg 임피던스 항이 포함되는 등가회로를 갖는다.