• 제목/요약/키워드: Double diffusion

Search Result 197, Processing Time 0.025 seconds

Discrimination of Cucumber mosaic virus and Broad bean wilt virus 2 Using Local Lesions on Vigna sinensis (동부(Vigna sinensis)의 국부병반을 이용한 Cucumber mosaic virus와 Broad bean wilt virus 2의 구별)

  • Bae, Sun-Hwa;Kim, Mi-Soon;Jung, Min-Young;Kwon, Soon-Bae;Ryu, Ki-Hyun;Kim, Kook-Hyung;Choi, Jang-Kyung
    • Research in Plant Disease
    • /
    • v.12 no.3
    • /
    • pp.221-225
    • /
    • 2006
  • Cucumber mosaic virus(CMV) and Broad bean wilt virus 2(BBWV2) were isolated from Gentiana scabra plants showing typical mosaic and yellowing symptoms. When the inoculum of mosaic symptom propagated in Nicotiana benthamiana was inoculated to primary leaves of Vigna sinensis, the local lesions of different types was developed. Type one produced a small necrotic spot(SNS) of pinpoint type, while the other one showed a large necrotic spot(LNS) of halo type. LNS on primary leaves of V. sinensis was also induced by inoculum from yellowing symptom on G scabra. Single lesion from SNS induced a typical mosaic symptom on N. Benthamiana. On the other hand, LNS produced a chlorotic ring symptom on inoculated leaves and mosaic plus necrotic ringspot on upper leaves of N. benthamiana. An isolate of CMV from SNS and BBWV2 from LNS were detected by using dsRNA analysis, RT-PCR and agar gel double-diffusion test. Thus, our results should provide a tool of a simple method for discrimination from mixed infected plants by CMV and BBWV2.

Emulsion Graft Polymerization of MMA to Sodium Alginate : Mechanism and Solvent Effect (알긴산 소다에의 MMA유화 그래프트 중합 : 메커니즘 및 용매효과)

  • Park, Hwan-Man
    • Journal of Adhesion and Interface
    • /
    • v.2 no.4
    • /
    • pp.10-23
    • /
    • 2001
  • In order to increase the lower values of % grafting and monomer conversion in the emulsion graft polymerization of methylmethacrylate(MMA) onto sodium alginate (SA; a polymer electrolyte) with alginic acid-g-PMMA, the graft polymerization with water soluble (methanol and acetone) and insoluble solvents was carried out using a varity of solvent amounts and agitating rates. And some physical properties of the graft polymer were also investigated. In the polymerizations with water insoluble solvent, there were pronounced improvements in both % grafting and MMA conversion by the promotion of MMA diffusion from the core to the SA adsorpted on the outer layer of particle and that of MMA complex formation with SA. And the effect was larger for the solvents (cyclohexane, decalin) which do not dissolve PMMA. On the other hand, in the polymerization with water soluble solvent, there was an significant increase in MMA conversion and a considerable increase in the % grafting by the destruction of electrical double layer around the SA chains, abstracting the hydrated water in the layer and the effect was more potential in the case of methanol which is a precipitant of PMMA.

  • PDF

Electrical characteristics of Au and Pt diffused silicon $p^{+}-n$ Junction diode (Au와 Pt 확산에 의한 실리콘 $p^{+}-n$ 접합 스위칭다이오드의 전기적 특성)

  • Chung, Kee-Bock;Lee, Jae-Gon;Choi, Sie-Young
    • Journal of Sensor Science and Technology
    • /
    • v.5 no.3
    • /
    • pp.101-108
    • /
    • 1996
  • The silicon $p^{+}-n$ junction diodes were fabricated. The fabricated wafers were treated by single or double annealing steps. Single annealing process was performed by diffusion of either Au or Pt into the wafer under the oxygen or nitrogen ambient at $800{\sim}1010^{\circ}C$. Second annealing step involved additional annealing of the single annealed wafer under the oxygen ambient at $800{\sim}1010^{\circ}C$ for one hour. Electrical characteristics of the diodes were investigated to evaluate the effect of the annealing treatments. In the case of single annealing under nitrogen ambient at $1010^{\circ}C$ for one hour, the amount of leakage current of Pt diffused diode was 75 times larger than that of Au diffused one. The optimum processing condition to achieve high speed silicon $p^{+}-n$ junction diodes from this study was obtained when Pt diffused wafer(treated under the nitrogen ambient at $1010^{\circ}C$ for one hour) was secondly annealed in an oxygen ambient at $800^{\circ}C$ for one hour. The resulting leakage current of two step annealed diodes were remarkably reduced to 1/1100 of the single annealed one. The diode characteristics such as recovery time, breakdown voltage, leakage current, and forward voltage were 4ns, 138V, 1.72nA, and 1V, respectively.

  • PDF

Production of Egg Yolk Immunoglobulin and Its Application for Pepper mild mottle virus in Serological Tests (Pepper mild mottle virus에 대한 난황항체의 생산과 혈청학적 진단에의 활용)

  • Han Jung-Heon;Lee Cheol-Ho;Kim Young-Ho;La Yong-Joon
    • Research in Plant Disease
    • /
    • v.12 no.2
    • /
    • pp.144-147
    • /
    • 2006
  • Egg yolk immunoglobulin (IgY) is much widely used in medical fields, but its use in serology of plant viruses is much limited. We produced an IgY against pepper mild mottle virus (PMMoV) and applied it to several serological tests. Polyclonal antibodies were obtained from the egg yolk of chicken immunized with a total of 2mg of purified PMMoV over 2 months. The titers of antibodies were measured with the ring-test over six months after the first injection. The highest.titers of IgY was 1/2,560 at 2 months after the first injection. Approximately 60-80 mg of IgY were obtained from one egg yolk. Using the IgY, 1ng/ml of purified PMMoV was detected with the indirect ELISA. Gelrite gel double diffusion test, ELISA and tissue immuno-binding assay employing IgY gave similar sensitivity and specificity to those of IgG developed in rabbit. Therefore, the IgY which can be obtained in large quantities from a chicken, might be useful for the antibody production and the serology of plant viruses.

Anti-microbial Activity Effects of Ozonized Olive Oil Against Bacteria and Candida albicans (오존화 올리브 오일의 세균과 Candida alicans에 대한 항미생물 활성 효과)

  • Chung, Kyung Tae;Kim, Byoung Woo
    • Journal of Life Science
    • /
    • v.29 no.2
    • /
    • pp.223-230
    • /
    • 2019
  • Ozone is a gaseous molecule able to kill microorganisms, such as yeast, fungi, bacteria, and protozoa. However, ozone gas is unstable and cannot be used easily. In order to utilize ozone properly and efficiently, plant oil can be employed. Ozone reacts with C-C double bonds of fatty acids, converting to ozonized oil. In this reaction, ozonide is produced within fatty acids and the resulting ozonized oil has various biological functions. In this study, we showed that ozonized oil has antimicrobial activity against fungi and bacteria. To test the antimicrobial activity of ozonized oil, we produced ozonized olive oil. Ozonized olive oil was applied to Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans. Antimicrobial activity was assayed using the disk diffusion method following the National Committee for Clinical Laboratory Standards. Minimal inhibitory concentrations (MIC) were 0.25 mg for S. aureus, 0.5 mg for S. epidermidis, 3.0 mg for P. aeruginosa, and 1.0 mg for E. coli. Gram positive bacteria were more susceptible than Gram negative bacteria. We compared growth inhibition zones against S. aureus and MRSA, showing that the ozonized olive oil was more effective on MRSA than S. aureus. Furthermore, the ozonized olive oil killed C. albicans within an hour. These data suggested that ozonized olive oil could be an alternative drug for MRSA infection and could be utilized as a potent antimicrobial and antifungal substance.

Mineralogical Characterization of the Chuncheon Nephrite: Mineral Facies, Mineral Chemistry and Pyribole Structure (춘천 연옥 광물의 광물학적 특성 : 광물상, 광물 화학 및 혼성 격자 구조)

  • Noh, Jin Hwan;Cho, Hyen Goo
    • Journal of the Mineralogical Society of Korea
    • /
    • v.6 no.2
    • /
    • pp.57-79
    • /
    • 1993
  • Chuncheon nephrite, which was formed by the polymetasomatic alteration of dolomitic marble, can be classified into pale green, green, dark green, and grey types on the basis of their occurrence, mineralogical and textural characteristics. The nephrites consist obiefly of fibrous or hairlike(length/width ratio>10) cryptocrystalline(crystal width < $2{\mu}m$) tremolite, and include less amounts of micro-crystalline diopside, calcite, clinochlore, and sphene as impurities. The oriented and rather curved crystal aggregate, of nephritic tremolite are densely interwoven, resulting in a massive-fibrous texture which may explain the characteristic toughness of nephritic jade. The characteristic greenish color of the nephrite may be preferably related to Fe rather than Cr and Ni. However, the variation of color and tint in the Chuncheon nephrite also depends on the mineralogical and textural differences such as crystallinity, texture, and impurities. The chemical composition of the nephritic tremolite is not stoichiometric and rather dispersed especially in the abundances of Al, Mg, and Ca. Al content and Mg/Ca ratio for the nephritic tremolite are slightly increased with deepening in greenish color of the nephrite. Fe content in the nephritic tremolite is generally very low, but comparatively richer in the dark green nephrite. In nephritic tremolite, wide-chain pyriboles are irregularly intervened between normal double chains, forming a chain-width disorder. Most nephritic tremolites in the Chuncheon nephrite show various type of chain-width defects such as triple chain(jimthompsonite), quintuple chain (chesterite), or sometimes quadruple chain in HRTEM observations. The degree of chain-width disorder in the nephritic tremolite tends to increase with deepening in greenish color. Triple chain is the most common type, and quadruple chain is rarely observed only in the grey nephrite. The presence of pyribole structure in the nephritic tremolite is closely related to the increase of Al content and Mg/Ca ratio, a rather dispersive chemical composition, a decrease of relative intensity in (001) XRD reflection, and an increase in b axis dimension of unit cell. In addition, the degree and variation of chain-width disorder with nephrite types may support that an increase of metastability was formed by a rapid diffusion of Mg-rich fluid during the nephrite formation.

  • PDF

Characteristics of Electrode Potential and AC Impendance of Perchlorate Ion-Selective Electrodes Based on Quaternary Phosphonium Salts in PVC Membranes (제4급 인산염을 이용한 과염소산 이온선택성 PVC막 전극의 전극전위와 AC 임피던스 특성)

  • 안형환
    • Membrane Journal
    • /
    • v.9 no.4
    • /
    • pp.230-239
    • /
    • 1999
  • Perchlorate ion-selective electrodes in PVC membranes that respond linearly to concentration 106 M were developed by incorporating the quaternary phosphonium salts as a canier. The effects of the chemical structure, the contents of canier, the kind of plasticizer and the membrane thickness on electrode characteristics such as the electrode slope, the linear respone range and the detection limit were studied. With this results, the detectable pH range, selectivity coefficients and AC impedance characteristics were compared and investigated. The perchlorate ion substituents of the quaternary phosphonium salts like tetraoctylphosphonium perchlorate (TOPP) , tetraphenylphosphonium perchlorate(TPPP), and tetrabutylphosphonium perchlorate(TBPP) as a canier were used. The electrode characteristics were better in the ascending order of TBPP < TPPP < TOPP, with the increase of carbon chain length of the alkyl group. Dioctylsebacate(OOS) was best as a plasticizer, the canier contents were better with 11.76 wt% and the optimum membrane thickness was 0.19 mm. Under the above condition, the electrode slope was 56.58 mV/$^P{ClO}_4$,the linear response range was $10^{-1}$\times$10^{-6}$ M, the detection limit was 9.66 x $10^{-7}$ M. The performance of electrode was better than Orion electrode. The electrode potential was stable within the pH range from 3 to 11. The order of the selectivity coefficients for the perchlorate ion was sol < F < Br < 1. With the result of impedance spectrum, it was found that the equivalent circuit for the electrode could be expressed by a series combination of solution resistance, parallel circuit consisting of the double layer capacitance and bulk resistance and Warburg impedance. And solution resistance was almost not appeared and Warburg impedance was highly appeared by diffusion. Then Warburg coefficient was 1.32$\times$$10^74 $\Omega$ $\cdot$ ${cm}^2/s^{1/2}$.

  • PDF