• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.99-102
• /
• 2009

We report our development of the fabrication process of sub-micron scale $Al-AlO_x-Al$ tunnel junction by using electron-beam lithography and double-angle shadow evaporation technique. We used double-layer resist to construct a suspended bridge structure, and double-angle electron-beam evaporation to form a sub-micron scale overlapped junction. We adopted an e-beam insensitive resist as a bottom sacrificing layer. Tunnel barrier was formed by oxidation of the bottom aluminum layer between the bottom and top electrode deposition, which was done in a separate load-lock chamber. The junction resistance is designed and controlled to be 50 $\Omega$ to match the impedance of the transmission line. The junctions will be used in the broadband shot noise thermometry experiment, which will serve as a link between the electrical unit and the thermodynamic unit.

• Composites Research
• /
• 제19권4호
• /
• pp.23-30
• /
• 2006

극저온 추진제 탱크를 개발하는 과정에서 복합재와 알루미늄 라이너를 접합하기 위한 접착제의 선택은 탱크의 안전성과도 직결된 매우 중요한 문제이다. 따라서 적합한 극저온용 접착제를 선택하기 위해 3종류의 접착필름이 선정되었으며 극저온용으로 개발된 탄소섬유/에폭시와 라이너 재료로 사용되는 알루미늄으로 구성된 양면 겹치기 조인트 시편을 제작하였다. 제작된 시편을 극저온 환경챔버를 사용하여 상온과 $-150^{\circ}C$에서 인장실험을 수행하여 각 접착제의 접착강도를 비교하였으며 파손 특성을 분석하였다. 또한 양면 겹치기 조인트 시편의 각 구성재료의 온도에 따른 기계적 물성변화를 측정하였으며 이를 이용하여 ABAQUS를 통한 유한요소해석을 수행하여 양면 겹치기 조인트 시편의 인장시험결과를 분석하였다.

• 센서학회지
• /
• 제8권5호
• /
• pp.368-376
• /
• 1999

본 논문에서는 머리빗형 액튜에이터의 제작 공정 중에서 RIE 식각 공정시 발생하는 식각의 비등방도의 변화에 의해서 머리빗형 액튜에이터의 스프링 상수, 공진 주파수, 정전 구동력 과리고 진동자 변위 등에서 발생하는 동작 특성이 설계 값으로부터 변화되는 것을 예측하였다. 이를 위해 $6\;{\mu}m$ 두께의 폴리실리콘에 대한 RIE 식각 실험을 수행하여 RF power, $Cl_2$ 유량 그리고 챔버내 압력에 따른 비등방도를 측정하였다. 실험 결과에서 RF Power, $Cl_2$ 유량, 그리고 챔버내 압력이 증가할수록 비등방도 감소하였다. 이러한 비등방도 감소에 따른 머리빗형 구조물의 동작 특성을 세 가지 다른 지지빔의 경우에 대해 예측하였는데 세 가지는 fixed-fixed, crab-leg, 그리고 double crab-leg 구조이다. 비등방도가 감소함에 따라 즉, 지지빔의 단면이 직사각형이 아니고 사다리꼴이 되면서, 머리빗형 액튜에이더의 스프링 상수, 공진 주파수, 그리고 정전 구동력은 감소하였지만 질량체의 변위는 증가하였다. 그리고 세 가지 구조물 중에서 double crab-leg 지지빔을 갖는 머리빗형 액튜에이터의 특성이 비등방도에 의해 가장 큰 영향을 받는 것으로 나타났다.

• Journal of Chest Surgery
• /
• 제18권2호
• /
• pp.241-249
• /
• 1985

Twenty-one patients with Double Chambered Right Ventricle [DCRV] associated with Ventricular Septal Defect [VSD] were treated by open heart surgery under cardiopulmonary bypass with moderate hypothermia in the Department of Thoracic and Cardiovascular Surgery, Hanyang University Hospital between June 1982 and October 1984. The following results were obtained 1. The symptoms and physical signs, specific for DCRV, could not be identified. 2. The radiologic findings on simple chest X-ray, specific for DCRV, could not be identified. 3. Electrocardiographic findings, specific for DCRV, could not be identified. 4. Cardiac catheterization was found to be the most important diagnostic method, revealing pressure gradient between proximal chamber and distal chamber in the right ventricle. The average pressure gradient between two chambers showed 48.1523.29 mmHg[varying from 15mmHg to 94mmHg]. 5. Cardiac angiography was found to visualize the anomalous muscle bundles in right ventricle [in 17 cases, 81%] but the evidence of pressure gradient between two chambers within right ventricle is considered necessary for the diagnosis of DCRV. 6. Via surgical observation, anatomical and pathologic findings of the anomalous muscle bundles, associated DCRV were identified. 7. As the direct pressure was measured on the operating table before and after surgery, the average pressure gradient across the muscle bundles showed 40.5219.75mmHg [varying from 16 to 89mmHg] preoperatively and 8.909.72mmHg [varying from 0 to 32mmHg] postoperatively, indicating significant surgical correction of the obstruction present. 8. The presence of anomalous muscle bundles, dividing the right ventricle into two separated chambers, and the presence of the pressure gradient over 15mmHg are considered necessary for the diagnosis of DCRV.

• Journal of Biosystems Engineering
• /
• 제13권4호
• /
• pp.9-19
• /
• 1988

The threshing of head-feed combine may be accomplished mainly by the action of impact between threshing teeth and rice. In this study, it was attempted to assess threshing performance characteristics of head-feed threshing teeth. And the characteristics of threshing teeth will be applied to the method which could analyze the time and order of impact between teeth and the rice, which was used as a basis for predicting the threshing performance and determining the optimum design parameters. The results of the study are summarized as follows: 1. About 50% of threshed material were threshed by the beginning 7 impacts on the rice bundle. Threshing torque decreased until 25 impacts and did not change thereafter. 2. There was significant difference in the threshability according to the shape of threshing teeth. The triangular-shaped tooth was the most efficient in threshability ratio and the semicircle-shaped tooth was the lowest. There was no significant difference in specific energy requirement for the varied teeth design. Torn-head ratio being generated by the semicircle-shaped and the triangular-shaped teeth in series was less than that by a single tooth with the triangular-shaped and the double setting of the triangular-shaped. Chaff generation ratio by the triangular-shaped and the semicircle-shaped teeth was less than the others tried. 3. The triangular-shaped teeth in series, which was newly designed for this study, showed an intermediate characteristics between the double setting of the triangular-shaped and the semicircle- shaped teeth. Threshability ratio of the triangular-shaped teeth in series was higher than that of the semicircle and lower than the double setting of the triangular-shaped tooth. Torn-head generation ratio for it was about same as that of the semicircle. Chaff being generated by the triangular-shaped teeth in series was about same as the double setting of the triangular-shaped teeth. 4. About 40% of threshed grains which passed through concave were concentrated under the threshing tooth and the rest of grains displayed a skew distribution toward the inlet of threshing chamber.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.1-7
• /
• 2013

Pneumatic cylinders are widely used to actuators in automatic equipments because they are relatively inexpensive, simple to install and maintain, offer robust design and operation, are available in a wide range of standard sizes and design alternatives. This paper presents a comparative study among the dynamic characteristics of meter-out and meter-in speed control of pneumatic cushion cylinders with a relief valve type cushion mechanism. Because of the nonlinear differential equations and a requirement for simultaneous iterative solution in a mathematical model of a double acting pneumatic cushion cylinder, a computer simulation is carried out to investigate pressure, temperature, mass flow rate in cushion chamber and displacement and velocity time histories of piston under various operating conditions. It is found that the piston velocity and pressure response in meter-in speed control are more oscillatory than with meter-out those when pneumatic cushion cylinders are driven at a high-speed. In meter-out speed control, the effective area of the flow control valve is larger than that of meter-in, and the supply pressure has to be much higher than the pressure required to move the load because it has also to overcome the back pressure in cushion chamber.

• Journal of Chest Surgery
• /
• 제18권2호
• /
• pp.273-278
• /
• 1985

The case of a patient with abnormal position of the atrial septum resulting in a left atrium with two atrioventricular valves and a disconnected right atrium is presented with review of related articles. Anatomic details showed atrial situs solitus and a left sided cardiac apex. The right atrium received both venae cavae and a coronary sinus. No AV valve was found in the right atrium, and the floor of this chamber was placed above the posterior wall of right ventricular chamber. The atrial septum with secundum ASD was displaced to right anteriorly at its lower portion and inserted to right of tricuspid annulus. The tricuspid and mitral valve configuration was that of so-called partial ECD, i.e. mitral cleft with large anterior mitral leaflets. The ventricular septum was intact and both ventricular chambers were equally well developed with normal relationships. Surgical repair of this anomaly was performed by resecting the abnormally positioned lower part of the atrial septum, repairing the cleft of the anterior mitral leaflet, and septating the atrium for diverting the systemic and pulmonary venous blood to RV and LV, respectively.

• 한국융합학회논문지
• /
• 제11권10호
• /
• pp.231-236
• /
• 2020

물 개질반응 고속선회 소각로 시험 설비를 제작하였다. 개질 반응실과 연소실은 직접 연결이 되게 하였다. 소각로와 집진 장치는 일체형으로 만들어 2중 격벽식 공기 냉각 구조로 만들었다. 송풍기를 집진장치 내부에 내장하여 공간적으로 효율성을 향상시켰다. 집진부의 옆에 부착된 다수의 집진통을 이용하여 분진을 수거하여 백필터가 별도로 필요없는 축류 유동형 다단식 집진장치를 적용하였다. 배출되는 가스 중 다이옥신을 측정한 결과 기준치 이하의 결과를 얻었다. 배출가스와 중금속을 측정한 결과 환경기준치 이하의 결과를 얻었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.171-176
• /
• 2006

연료 과농 가스발생기에 대한 실험적 연구가 수행되었다. 연소 성능에 주요한 영향을 미치는 분사기 헤드에는 1.5의 리세스 수를 갖는 내부 혼합형 이중 스월 분사기 37개가 배치되었다. 본 논문에서는 연소실 길이, 직경, 그리고 교반링 등의 연소실 설계 변경에 따른 실물형 가스발생기의 연소 안정성 특성에 대하여 살펴보았다. 연소시험 결과 공진 주파수가 고주파 영역에서 생성됨에 따라 동압의 세기는 전반적으로 감소하였으나, 연소 불안정을 완전히 억제시키지는 못하는 것으로 나타났다.

• 환경생물
• /
• 제20권1호
• /
• pp.20-24
• /
• 2002

남조류에 의한 수화가 발생한 과림, 도창, 물왕 저수지로부터 시료를 채수 하여 남조류 분해 균주의 분리를 시도하였다. BG-11배지에 Anabaena cylindrica를 double layer method를 이용하여 남조류 lawn을 만들어 각각의 시료를 $100\mu{l}$씩 smearing하였다. $28^\circ{C}$ 3,000 Lux light chamber에서 13일간 배양하여 도창 저수지 시료를 접종한 Anabaena cylindrica lawn에서 남조류 분해능을 가지는 곰팡이를 분리하였다. 분리된 곰팡이의 동정은 Vitek system을 이용하여 수행하였으며, 그 결과 Cryptococcous laurentii로 동정되었다. SDS-PAGE 결과 Cryptococcus laurentii는 4개(29, 35.2, 40.9, 51.1 kDa)의 세포외 분비 단백질을 가지는 것으로 확인되었으며. Anabaena cylindrica와 혼합 배양시에는 특히 29 kDa의 단백질이 많이 분비되는 것을 확인하였다.