• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.85-94
• /
• 2004

Experimental study on combustion characteristics of double swirl coaxial injectors has been conducted for the assessment of critical injector design parameters. A reusable, unielement thrust chamber has been fabricated with a water-cooled copper nozzle. Two principal design parameters. a swirl angle and a recess length, have been investigated through hot firing tests for the understanding of their effects on high pressure combustion. Clearly, both parameters considerably affect the combustion efficiency, dynamics and hydraulic characteristics of an injector. Internal mixing of propellants in a recess region increases combustion efficiency along with the increase of a pressure drop required for flowing the same amount of mass flow rates. It is concluded that pressure buildup due to flame can be released by the increase of LOx flow axial momentum or the reduction of a recess length. Dynamic pressure measurements of the thrust chamber show varied dynamic behaviors depending on injector configurations.

• Membrane and Water Treatment
• /
• v.7 no.5
• /
• pp.417-431
• /
• 2016

Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.

• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.316-323
• /
• 2010

In this paper, we propose fingertip extraction and hand motion recognition method for augmented reality applications. First, an input image is transformed into HSV color space from RGB color space. A hand area is segmented using double thresholding of H, S value, region growing, and connected component analysis. Next, the end points of the index finger and thumb are extracted using morphology operation and subtraction for a virtual keyboard and mouse interface. Finally, the angle between the end points of the index finger and thumb with respect to the center of mass point of the palm is calculated to detect the touch between the index finger and thumb for implementing the click of a mouse button. Experimental results on various input images showed that our method segments the hand, fingertips, and recognizes the movements of the hand fast and accurately. Proposed methods can be used the input interface for augmented reality applications.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.633-642
• /
• 2004

This study tries to generalize the stream network by constructing rule-based modelling. A study on the map generalization tends to be concentrated on development of algorithms for modification of linear features and evaluations to the limited cartographic elements. Rule-based modelling can help to improve previous algorithms by application of generalization process with the results that analyzing mapping principles and spatial distribution patterns of geographical phenomena. Rule-based modelling can be applied to generalize various cartographic elements, and make an effective on multi-scaling mapping in the digital environments. In this research, nile-based modelling for stream network is composed of generalization rule, algorithm for centerline extraction and linear features. Before generalization, drainage pattern was analyzed by the connectivity with lake to minimize logical errors. As a result, 17 streams with centerline are extracted from 108 double-lined streams. Total length of stream networks is reduced as 17% in 1:25,000 scale, and as 29% in 1:50,000. Simoo algorithm, which is developed to generalize linear features, is compared to Douglas-Peucker(D-P) algorithm. D-P made linear features rough due to the increase of data point distance and widening of external angle. But in Simoo, linear features are smoothed with the decrease of scale.

• Physical Therapy Korea
• /
• v.22 no.3
• /
• pp.81-90
• /
• 2015

This study aimed to determine the effects of Rhythmic Auditory Stimulation (RAS) using music and a metronome on the gait of stroke patients. 13 female and 15 male volunteers were randomly allocated to two groups: namely a group to receive RAS using music and a metronome group (the experimental group; $n_1=14$) and a group to receive RAS using a metronome only (the control group; $n_2=14$). The affected side was the left side in 15 subjects and the right side in 13 subjects. The mean age of the subjects was 56.6 years, and the mean onset duration of stroke was 8.6 months. Intervention was applied for 30 minutes per session, once a day, 5 times a week for 4 weeks. To measure the patients' gait improvement, we measured gait velocity, cadence, stride length, double limb support using GAITRite, body center sway angle using an accelerometer, and Timed Up-and-Go test. Functional Gait Assessment were conducted before and after the experiment. The paired t-test was used for comparisons before and after the interventions in each group. Analysis of covariance was used for comparisons between the groups after the interventions. Statistical significance was set at ${\alpha}=.05$. Within each of the two groups, significant differences in all of the dependent variables before and after the experiment (p<.05) were observed. However, in the comparison between the two groups, the experimental group showed more significant improvements in all dependent variables than the control group (p<.05). Our results also suggest that in applying RAS in stroke patients, the combination of music and a metronome is more effective than using a metronome alone in improving patients' gait.

• Journal of the Korea Convergence Society
• /
• v.9 no.5
• /
• pp.151-156
• /
• 2018

In this study, CFRP and metal or nonmetal were bonded with adhesive and the fracture study on this material was carried out. CFRP at the upper side of specimen and metal or nonmetal were assigned at the lower side of specimen by using DCB specimen as the analysis condition. And it was desribed that the structural adhesive were bonded between both upper and lower sides. As this analysis result, the least equivalent stress was shown at the specimen bonded with aluminium. The maximum shear stress was shown to become lowest at the de-bonded CFRP specimen when titanium was used. In conclusion, it was shown that the deformation of specimen became lowest when titanium was used. On the basis of this study result, the esthetic sense can be shown as the fracture data of bonded interface using adhesive are grafted onto the real life.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1206-1212
• /
• 2005

In this paper, we propose a novel antenna structure which uses the electric and magnetic currents so as to eliminate nulls on their radiation pattern. The tag antenna was matched to the conjugate impedance of the commercial tag chip using the modified double T matching network. The radiation efficiency is about $90\%$, and the bandwidth($S_{11}< -10 dB$) is 848${\~}$926 MHz. Also it shows the gain deviation between the maximum and minimum gains about 4 dB at any direction of the tag antenna at the operating frequency. The readable range of the tag is 1.7${\~}$2.4 m for an arbitrary rotation angle of the tag with a commercial tag chip.

• Structural Engineering and Mechanics
• /
• v.57 no.6
• /
• pp.1125-1142
• /
• 2016

Tunneling is one of the challenging tasks in civil engineering because it involves a variety of decision making and engineering judgment based on knowledge and experience. One of the challenges is to construct tunnels in risky areas under shallow overburden. In order to prevent the collapse of ceilings and walls of a large tunnels, in such conditions, either a sequential excavation method (SEM) or ground reinforcing method, or a combination of both, can be utilized. This research deals with the numerical modeling of L-profiles and pipe fore-poling pre-support systems in the adit tunnel in northwestern Iran. The first part of the adit tunnel has been drilled in alluvial material with very weak geotechnical parameters. Despite applying an SEM in constructing this tunnel, analyzing the results of numerical modeling done using FLAC3D, as well as observations during drilling, indicate the tunnel instability. To improve operational safety and to prevent collapse, pre-support systems, including pipe fore-poling and L-profiles were designed and implemented. The results of the numerical modeling coupled with monitoring during operation, as well as the results of instrumentation, indicate the efficacy of both these methods in tunnel collapse prevention. Moreover, the results of modeling using FLAC3D and SECTION BUILDER suggest a double angle with equal legs ($2L100{\times}100{\times}10mm$) in both box profile and tee array as an alternative section to pipe fore-poling system while neither $L80{\times}80{\times}8mm$ nor $2L80{\times}80{\times}8mm$ can sustain the axial and shear stresses exerted on pipe fore-poling system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.429-436
• /
• 2010

Recently, (terahertz ray) applications have emerged as one of the most promising new powerful nondestructive evaluation (NDE) techniques. In this study, a new T-ray time-domain spectroscopy system was utilized for detecting and evaluating layup effect and flaw in FRP composite laminates. Extensive experimental measurements in reflection and thru-transmission modes were made to map out the T-ray images. Especially this was demonstrated in thick GFRP laminates containing double saw slots. In carbon composites the penetration of terahertz waves is limited to some degree and the detection of flaws is strongly affected by the angle between the electric field(E-field) vector of the terahertz waves and the intervening fiber directions. The artificial defects investigated by terahertz waves were bonded foreign material, simulated disbond and delamination and mechanical impact damage. The effectiveness and limitations of terahertz radiation for the NDE of composites are discussed.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.573-584
• /
• 2011

The purpose of this study was to perform a kinematic analysis of the high jump techniques of the three men's medalists at the 2011 IAAF Championships in Daegu (August 27-September 4, 2011). In particular, a three-dimensional coordinates method was used to analyze the last three strides before touchdown, the touchdown techniques, and the movements after takeoff toward the bar. An analysis of the, data for the biomechanical characteristics of the world's best high jumpers could contribute to an improvement in the performance of a national high jumper. The first conclusion of the data analysis was that the arm movements of the gold medalist, J. Williams, had a single arm form, whereas the arm movements of the other medalists were a double arm form. Second, the difference in the knee joint angles upon touchdown and toe-off was $10^{\circ}$. Third, J. Williams achieved his maximum CM height after takeoff (1.26 m) using the maximum flexion of his knee joint. Fourth, the foot contact duration of A. Dmitrik (0.11 s) was the shortest among the medalists, and the ratio for his transformation of horizontal velocity to vertical velocity was the greatest (75.25%) among the three. Last, the maximum CM height of T. Barry was the greatest, and his foot contact duration was the longest.