• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.371-376
• /
• 2007

This paper describes a study to determine proper escape way interval for the design phase of single bored double track tunnel. Among many methods which determine escape way interval, we choose a QRA(Quantitative Risk Analysis) method. But a different method must be chosen differ from other country because of special design situation of Korea. So, it is necessary to develop a method which considers a special design condition of Korea. Because fire accidents of railway tunnel are a rare event, simulated situation can be produced by CFD simulation and evacuation analysis simulation. However, it is generally difficult to estimate of fatalities from these methods, so a concept of FED is introduced to estimate of fatalities. Quantification process provides effective results for practical design stage and the result were employed in design.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.6
• /
• pp.37-43
• /
• 1997

In this paper, an analog-domain powr-reduction technique for a low-voltage CMOS operational amplifier and its application to clock-based VLSI systems are proposed. The proposed technique cuts off the bias current of the op amp during a half cycle of the clock in the sleeping mode and resumes the curent supply sequentially during the remaining cycle of the clock in the normal operating mode. The proposed sequential sbiasing technique reduces about 50% of the op amp power and improves the circuit performance through high phase margin and stable settling behavior of the output voltage. The power-reduction technique is applied to a sample-and-hold amplifier which is one of the critical circuit blocks used in the front-end stage of analog and/or digital integrated systems. The SHA was simulated and analyzed in a 0.8.mu.m n-well double-poly double-metal CMOS technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1747-1750
• /
• 2022

As shrinking the semiconductor process into the deep sub-micron to achieve high-density, low power and high performance integrated circuits, MBU (multiple bit upset) by soft errors is one of the major challenge of on-chip memory systems. To address the MBU, single error correction, double error detection and double adjacent error correction (SEC-DED-DAEC) codes have been recently proposed. But these codes do not resolve mis-correction. We propose the SEC-DED-DAEC-TAED(triple adjacent error detection) code without mis-corrections. The generated H-matrix by the proposed heuristic algorithm to accomplish the proposed code is implemented as hardware and verified. The results show that there is no mis-correction in the proposed codes and the 2-stage pipelined decoder can be employed on-chip memory system.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2240-2248
• /
• 2015

The integration of the large-scale wind power brings great challenge to the stability of the power grid. This paper investigates and studies the fault on May 14, 2012 of the large-scale cascading trip-off of wind turbines in North China. According to the characteristics of the voltage variation, the fault process is divided into three stages: the pre-event stage, the critical stage before cascading, and the cascading stage. The scenes in the fault are reproduced, using the full-size actual power system model. Simulation models of double-fed induction generators (DFIGs) and SVCs including protection settings and controller strategies are carefully chosen to find out the reason of voltage instability in each stage. Some voltage dynamic that have never been observed before in the faults of the same kind are analyzed in detail, and an equivalent voltage sensitive dynamic model of DFIG is proposed for the fast computation. The conclusions about the voltage dynamics are validated by the actual PMU observation evidence.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.40-45
• /
• 2004

The experimental results of the G-M (Gifford-McMahon) type pulse tube refrigerators are presented in this paper. The pulse tube refrigerator, which has no moving parts at its cold section, is attractive in obtaining higher reliability, simpler construction, and lower vibration than any other small refrigerators. The objectives of this study are to develop the design technology of the G-M type pulse tube refrigerator and acquire its application methods for replacing G-M cryocooler. As a preliminary test, the refrigeration performances of the basic, orifice, and double inlet pulse tube refrigerators were investigated. The lowest temperature obtained in the one-stage pulse tube refrigerator was 34.4K and the refrigeration capacity at the optimum operation condition was 23W at 80K. And the lowest temperature of the second stage cold head in the two-stage pulse tube refrigerators was 18.3K and the refrigeration capacities at optimum condition were 0.45W at 20K and 20W at 80K, respectively. Finally, the lowest temperature obtained in the three-stage pulse tube refrigerator was 29.8K and the refrigeration capacity at the optimum operation condition was 1.3W for 40K and 5W for 70K.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.97-105
• /
• 2010

This study was to evaluate the performance of the Double stage Pore controllable fiber (DP) filter system as the pre-treatment of the RO membrane. The evaluation for the pre-treatment filter was performed through the indirect method, SDI (Silt Density Index) measurement of the filtrate. This study was done during Jan. 3 of 2009 to Dec. 3 of 2009 at OO Water Treatment Plant that was suppling industrial water to plants, and the raw water was contaminated lake water and it was fed to the system after clarification with coagulation. The average turbidity of the feed water and that of the filtrate was 0.79 NTU (0.28~4.01 NTU), and 0.16 NTU (0.04~0.50) respectively. And so the average turbidity removal efficiency was 77%. The filtrate flow rate and the backwash water flow rate was about 230 $m^3$/day and about 8.7 $m^3$/day respectively, and so the backwash rate was 3.8%. The data for some samples were obtained after a few days storage, and it caused the higher turbidity and SDI15 as the storage time was increased. But average SDI value of the filtrate was 3.6 (2.26~5.00) which was lower than minimum value required by the RO membrane manufacturer as the RO feed water to guarantee the life time of the RO membrane. So, the DP filter system was enough for the application as the pre-treatment of the RO membrane.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.291-297
• /
• 2016

Patients with $Sj{\ddot{o}}gren^{\prime}s$ syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony, and limited space for restoration may occur. However, ideal occlusion is obtained in both centric and eccentric relation by regaining the disocclusion of the posterior teeth through the anterior and lateral guidance using twin-stage method. In this case, rehabilitation was performed for a $Sj{\ddot{o}}gren^{\prime}s$ syndrome patient with maxillary and mandibular incisor's severe attrition and teeth discoloration by using twin-stage method.

• Journal of Environmental Science International
• /
• v.31 no.5
• /
• pp.413-422
• /
• 2022

To identify rice (Oryza sativa L.) cultivars suitable for Italian ryegrass (Lolium multiflorum Lam.)-rice double cropping systems, we investigated the yield and grain quality of four different midseason maturing rice cultivars ('Daebo', 'Haepum', 'Haiami', and 'Samdeog') and four midseason-to-late maturing rice cultivars ('Hyunpoom', 'Saeilmi', 'Saenuri', and 'Samkwang') in single rice cropping and Italian ryegrass-rice double cropping systems in paddy fields of Miryang, South Korea. We found that organic matter and available P₂O₅ content slightly decreased, whereas Na content increased, in the soil where Italian ryegrass was cultivated during winter compared to that in the soil that remained fallow during winter. The pH, electrical conductivity, organic matter, and contents of K⁺, Ca²⁺, Mg²⁺, and Na⁺ decreased, whereas the available P₂O₅ content slightly increased, in the soil where rice was harvested in both single and double cropping systems. However, compared to the optimum soil conditions for rice cultivation, available P₂O₅ and K⁺ content were high and Mg²⁺ content was low in both single and double cropping systems. At the heading stage, the culm length and leaf color slightly increased in most of the rice cultivars, whereas the panicle length and number slightly decreased, in the double cropped system. After harvesting, spikelet number and milled rice yield did not show a significant difference between single and double cropping systems. However, the ripened grain rate and weight per thousand grains increased slightly in the 'Saeilmi' and 'Samkwang' cultivars but remained either stable or slightly low in other cultivars in the double cropping system. The milled rice yield was high (> 500 kg/10a) in 'Daebo' and 'Haepum' among midseason maturing rice cultivars, and in 'Saeilmi' and 'Saenuri' among midseason-to-late maturing rice cultivars, in both single and double cropping systems. The head rice rate was high in midseason maturing rice cultivars in the double cropping systems, reaching > 70% in 'Haepum' and 'Haiami' cultivars, whereas it decreased in most midseason-to-late maturing rice cultivars (excluding 'Samkwang' cultivar), in double cropping systems. Particularly, it exceeded > 70% in the 'Saenuri' cultivar in both single and double cropping systems. The protein content in milled rice increased, whereas the amylose content either remained stable or slightly increased, in double cropping systems. The Toyo taste value decreased in all midseason-to-late maturing rice cultivars and slightly increased in the 'Daebo' and 'Haiami' cultivars among midseason maturing rice cultivars in double cropping systems. However, Toyo taste values in the 'Haepum', 'Haiami', and 'Saenuri' cultivars exceeding > 80% in both single and double cropping systems. Therefore, we recommend 'Haepum', 'Haiami', and 'Saenuri' cultivars as candidates for Italian ryegrass-rice double cropping systems due to high yield, head rice rate, and Toyo taste value.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.2
• /
• pp.110-116
• /
• 2001

This experiment was carried out to investigate the effects of amount of nitrogen application with the barley straw application on the changes in soil physical and chemical properties. nutrient uptake and percentage recovery of chemical fertilizer N in the rice plant from 1997 to 1998. The soil physical properties, such as bulk density, hardness, porosity and gaseous phase were improved by barley straw application. There was also improvement or increment in the soil chemical properties, such as pH, organic matter, T-C. T-N, available $SiO_2$, exchangeable K and cation exchange capacity, but decrease in available $P_2O_5$. The $Fe^{+{+}}$ content in soil after barley straw application was high from tillering stage to panicle forming stage, but becoming lowered toward the heading stage, while $Mn^{+{+}}$ content was increased. N uptake with barley straw application was increased in the N $126kg\;ha^{-1}$ plot, but decreased in the N $141kg\;ha^{-1}$ plot. The uptake of fertilized N was continued longer in barley straw application than none-application plot. Percentage recovery of chemical fertilizer N in rice straw was around 1% at tillering stage, but was highly increasing till maximum tillering stage, while the recovery was generally low in barley straw application. Meanwhile, fertilizer P uptake in barley straw application was high, but potassium uptake was low at all different levels of N application.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.2
• /
• pp.169-190
• /
• 2024

The purpose of this study is to design an effective innovation model for communication-centered public services, based on the case of Korea Midland Power Co., Ltd (KOMIPO). This study analyzed customer and employee participation activities at KOMIPO, focusing on communication activities to derive the best practices. The study comprised of the following stages: (1) Preparation stage to assess the current situation and promote change management; (2) Problem-solving stage for improving public services; (3) Problem-solving stage for improving work processes; (4) Problem-solving stage for strengthening collaboration, and (5) Design stage for an innovation model. Based on the results of this study, an innovation model was developed for public services by applying the double-diamond design process. The proposed model presents a process structure, which is derived through an iterative process of primary divergence (discovery) and convergence (definition), and secondary divergence (development) and convergence (delivery). This study also proposed the possibility of applying the Idea-Power-Plant activities of KOMIPO's best practices to the proposed model. While this study proposed an innovation model for communication-centered public services through the analysis of a specific public company, the results of the study provide broad insights for effective operations management through efficient communication based on the participation of customers and employees in public institutions.