• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.135-141
• /
• 2020

This paper summarizes the data of a monopole antenna with a sleeve structure that can be applied in various ways. Sleeve monopole antennas have broadband characteristics and are used for multi-frequency applications. The sleeve monopole antenna is composed of a vertical conductor, which is a radiator, and a sleeve having the same structure as a coaxial cable. The sleeve acts as a radiator and an open stub. The length of the sleeve should be 1/3~2/3 of the total length of the antenna. A monopole antenna having a sleeve structure is applicable to a vehicle wiper antenna. In addition, the case of applying this antenna to a broadband sleeve antenna using a loading coil, a broadband printed sleeve monopole antenna for an ISM band, a gap sleeve and a double sleeve, and a UWB planar monopole antenna using half cutting was summarized and analyzed in terms of structure and broadband.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.215-220
• /
• 2016

In this paper, a wideband antenna accomplished by adding a double sleeve of a rectangular planar monopole structure is proposed. In order to impedance matching of proposed antenna, the antenna performance was improved by adding two gap sleeves and outer sleeve for double sleeve structure. HFSS simulator of ANSYS corp. was used in order to confirm the antenna parameter characteristic. According to the simulation results, the VSWR was less than 2 for the range of 2.5GHz~10.5GHz. The frequency bandwidth is 8GHz. The frequency range of the actual fabricated antenna was 2.92GHz~10.32GHz, the frequency bandwidth is 7.4GHz. The measured radiation pattern frequency is 3GHz, 6GHz and 9GHz. The results are similar with dipole antenna pattern in all frequency. The antenna size is $40{\times}40mm^2$. The utilization possibility of the ultra-wideband planar monopole antenna could be confirmed according to compare and analyze the simulation and measurement data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.257-262
• /
• 2017

In this paper, we proposed a rectangular planar monopole antenna with a double sleeve that applied to a half-cut and a discontinuous feed structure. A rectangular planar monopole antenna with a double sleeve was cut in half along the magnetic symmetry line, and impedance matching was achieved by a discontinuous structure was applied to a feeder and by adjusting the double sleeve gap. We used the HFSS simulator of ANSYS company to confirm the antenna parameter property, and the antenna size was $21{\times}40mm^2$. In the proposed antenna, the simulation frequency range with VSWR of 2 or less was 2.6GHz to 10.25GHz. The bandwidth was 7.65GHz. The frequency range of the fabricated antenna was 3.3GHz to 9.75GHz, and the bandwidth was 6.45GHz. The measured radiation pattern frequencies were 3.5GHz, 5.5GHz, 7.5GHz, and 9.5GHz. A radiation pattern similar to the dipole antenna pattern was obtained at all frequencies.

• Journal of the Korean Society of Costume
• /
• v.57 no.7
• /
• pp.45-52
• /
• 2007

This study is based on the observation of women's Jangui in 17th centuries. As we observed, Jangui in seventeenth century was shown the same style. They were not headdress but coat. The characteristics of shape are Mokpankit, double-seop, straight sleeve, triangle moo, sam-su(which is attached to the end of sleeves) and a little coat string etc. There is no specific mode difference with the change of times. However, the straight sleeve is shown straight line in the early Chosun dynasty. Jangui in seventeen century are all oblique line sleeve except Jangui of Jin-ju Ha's family. Jangui put on coat do not seem clear-cut difference with the change of times. From Jangui of Yang-chun Hu's family in 14th centuries till An-dong Kim's family, the special features of Jangui are the same style. In addition, The double-seop in 17th centuries was not completely symmetry. However, after 19th centuries, Jangui for headdress was shown perfectly symmetry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.5
• /
• pp.738-747
• /
• 1998

The purpose of this study was to compare the positional stability of removable dies using several dowel pin systems. The removable dies were made by using five dowel pin systems: single dowel pin(Group I), single dowel pin and prepared groove on the die base(Group II), two-single dowel pin(Group III), two separate parallel dowel pins with plastic sleeves(Group IV), double straight dowel pins with metal sleeve(Group V). Special aluminum mold was made for specimens, and the dies of specimens removed and replaced thirty times with universal testing machine. Horizontal and vertical shift of dies was measured by Olympus monocular scanning tunneling microscope(STM5). The results were as follows: 1. The vertical shift was larger than the horizontal shift in all the other groups except Group I. 2. Single dowel pin system(Group I) was the most unstable of five dowel pin systems. 3. Double dowel pin systems with steeve(group IV, V) were the most stable of five dowel pin systems. 4. This study indicates that excellent horizontal positional stability is attainable with use of additional groove on the die base or double dowel pin. and excellent vertical positional stability is attainable with use of sleeve.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.1
• /
• pp.73-82
• /
• 2004

Statment of problem : Little in known about the importance of selection of various double crowns as retainer in determining the outcome of treatment with double crown retained removable partial denture. Purpose : To obtain information about the effects and the results of this treatment modality. Material and methods : This study describes 61 double crown retained removable partial dentures worn by 51 patients from Samsung Medical Center, Seoul a time ranging between 6 and 48 months and evaluate occlusal contacts on the denture teeth, denture movement, incidence of denture relining, denture retention, fracture of dentures and abutments, hygiene, residual ridge inflammatory changes, number of lost abutment,. interruption of denture use. Results : One tenth of all the restorations were relined. Restorations in 21 arches fractured repeatedly for various reasons . There was no apparent interrelationship between fractures and the five groups. Conclusion : Good prognoses of removable partial dentures were shown in all groups(Kennedy Classes I, II, III, combination and few remaining abutment).

• The Research Journal of the Costume Culture
• /
• v.23 no.3
• /
• pp.439-453
• /
• 2015

This research is regarding Park Ki-Jong's Western-style court costume and emphasizes the shape and style peculiarities of Western-style court costumes in the Korean Empire from the 1876 Port Opening to the 1910 annexation of Korean to Japan. Park Ki-Jong's frock coat was made during the period of the established law from 1900 to 1910. 1) The brand was ASADA TAILOR from Kyung-Sung. 2) The shape was long at the front and back, and it featured a picked lapel and double breast with six buttons to fasten and two buttons for decoration on the upper part. 3) The frock coat's materials were black wool fabric and black ridged silk. The lining's material was black plain silk and the sleeve's lining was white with blue striped silk. 4) The front separated the upper and bottom parts. The bottom was composed of a one-piece A-line skirt that continued from the front to back. The top of the back was separated by the princess line and the center-back seam was also separated with a vent. However, the center-back of the waistline was not separated, and it continued to one piece. The sleeve shape was a two-piece sleeve style with a phony vent and two wrapping buttons.

• Korean Journal of Bronchoesophagology
• /
• v.3 no.1
• /
• pp.61-69
• /
• 1997

A total of 55 patients underwent surgical managements for postintubation tracheal stenosis from July 1975 through March 1997. All but 8 had received ventilatory assistance. The patients had S cuff lesions, 17 stoma lesions, 7 at both levels, 5 at subglottic lesions. Thirty two patients underwent the sleeve tracheal resection and end-to-end anastomosis. Five patients performed a wedge resection and end-to-end anastomosis. Twenty two patients received the Montgomery T-tube for relief of airway obstruction. Simple excision of granulation tissue was done in 7 patients. Rethi procedures(anterior division of cricoid cartilage, partial wedge resection of lower thyroid cartilage and T-tube molding) were performed in 2 subglottic stenosis patients. And the other subglottic patient was received permanent tracheal fenestration at 1975. The tracheoesophageal fistula patient was done sleeve tracheal resection and end-to-end anastomosis with interrupted double layer closure of esophageal fistula site. Cervical approach was used in 49 cases, cervicomediastinal in 13 cases and median stemotomy In 6 cases. Techniques for obtaining tension-free anastomosis included a cervical neck flexion(15-30$^{\circ}$) in all sleeve resection patients and laryngeal release in one. The length of resection was 1.5 to 5.0 on A total of 41 patients(74.5%) had good(24 patients) or satisfactory(17 patients) results. But in ten cases, the restenosis of anastomosis site which is the most common complication was developed Two of them underwent a second reconstruction and 8 patients required T-tube insertion for airway maintenance. Three patients(5.4%) died. The causes of death were tracheo-innominate artery fistula(2) and sudden obstruction of airway(1).

• Korean Journal of Human Ecology
• /
• v.12 no.2
• /
• pp.253-263
• /
• 2003

The purposes of this study were to find out an evaluation scale that could predict wear comfort and to investigate the effect of the skin-contacting fiber type on the subjective sensation and microclimate. Sensorial evaluation was basically followed by the Human Perception Analysis (HPA) interviewing 144 consumers. Sixteen female subjects were participated in the sleeve wear test with and without wearing vapor permeable water repellent outerwear. Experimental sleeves were constructed using the same double knit by turning inside out to control other material effects except the skin-contacting fiber type, hence each different side of double knit, cotton side and the cotton/polypropylene blend side, was next to skin in each trial of the experiment. As results, it was noted that the term representing a combined feeling of thermal and wetness sensation, and muggy appeared to be a powerful language to measure perceptual responses of human subject among five dimensions of evaluation. although the ordinary users did not use the term very often. As for the comfort properties of double knits, it seemed that subjects slightly more preferred polypropylene/cotton blend to cotton as the skin-contacting fiber type when they wore outerwear and their skin were covered with sweat, although the result was rot statistically significant and need to be confirmed under higher work load.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.60-71
• /
• 2022

The reusable, low-cost launch vehicle development trend in the recent launch vehicle market is being subdivided into several ways, and the throttleable engine is one of them. Plus, several nations have selected methane as a next-generation propellant due to its cleanness. In this research, a throttleable pintle injector using gas methane and liquid oxygen as propellants was developed, followed by its spray and combustion characteristics analysis, including high pressure cold and hot tests. The designed throttleable pintle injector has a double sleeve structure, and its tightness and functionality are confirmed through repetitive atmospheric, high-pressure cold tests, and hot tests. Though some design errors were discovered and a low throttling level was unable to be achieved in the combustion test.