• Journal of Chest Surgery
• /
• v.12 no.3
• /
• pp.225-232
• /
• 1979

A 15-year-old girl underwent successful surgical correction of double-outlet right ventricle [S.D.L.] subaortic ventricular septal defect, patent foramen ovale, and pulmonary hypoplasia with valvular stenosis. The operation consisted of an internal baffling connecting the left ventricle to the aorta through the ventricular septal defect. The pulmonary stenosis was corrected with the method of connection the right ventricle to the pulmonary artery bifurcation using the Hancock valve[18mm] contained conduit. This rare type of DORV seemed to be suitable for corrective surgery, and the patient`s condition is very good until present time (post operative 7 months).

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.359-365
• /
• 2014

Successful results of treatments using double crown prostheses for the partially edentulous patients who have a few remaining teeth have been reported in several journals. A double crown removable partial denture can be an alternative treatment for the patients with a poor periodontal condition of remaining teeth. Since a double crown removable partial denture can be applied without the risk of surgical operation to the medically compromised patients with a poor periodontal condition which is inadequate for dental implants, it has psychological and economical advantages. In this case, there were sufficient remaining teeth to be restored with fixed prostheses in maxilla, while there were a few remaining teeth with a very poor periodontal condition so that it was almost impossible to restore with a clasp removable partial denture using these remaining teeth in mandible. In addition, the patient had the medical history of surgical operation due to osteomyelitis in the mandibular anterior areas a year ago, thus difficult to conduct an implant placement. The main objective of this report is to introduce our case because a double crown partial denture using a few mandibular remaining teeth showed satisfactory results in functional and esthetical aspects during more than two years follow-up period in this unfavorable condition.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.72-76
• /
• 2003

This paper presents the design concept and operation results of float-off for FSO (340,000 DWT Class, ELF AMENAM KPONO Project) built on the ground, without dry dock facilities. It was the first attempt to build FSO, completely, on the ground and launch it using DBU (Double Barge Unit, which was connected by rigid frame structure.) The major characteristics of FSO, which are similar to general VLCC type hull, including topside structure, weigh 51,000 metric ton. In order to have sufficient stability during the deck immersion of DBU, while passing through a minimum water plane area zone, proper trim control was completed with LMC (Load Master Computer). The major features of the monitoring system include calculation for transverse bending moment, shear force, local strength check of each connector, based on component stress, and deformation check during the load-out and float-off. Another major concern during the operation was to avoid damages at the bottom and sides of FSO, due to motion & movement after free-floating; therefore, adequate clearances between DBU and FSO were to be provided, and guide posts were installed to prevent side damage of the DBU casings. This paper also presents various measures that indecate the connector bending moment, damage stability analysis, and mooring of DBU during float off.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.806-813
• /
• 2013

This paper aims to compare the performance of three phase induction motor drives using Five Leg Inverter (FLI) and Three Leg Inverter (TLI) configurations. An Indirect Field Oriented Control (IFOC) method using a TLI is well established and incorporated for high performance speed drives in various industries. The FLI dual motor drive system on the other hand shows good workability in the independent control of two induction motor drives simultaneously. In this experiment, the IFOC method is utilized for both drive systems, and Space Vector Pulse Width Modulation (SVPWM) is used to generate pulses for both inverters. For the FLI, the Double Zero Sequence (DZS) Injection technique is used to generate the modulation signal. The complete experiment setup is done by using a DSpace 1103 controller board. The individual motor performances are analyzed using similar schemes, equipment setups and controller parameter values. The results show similar speed performance response capability between the single motor operation using a TLI system and the two motor operation using a FLI system based on the variable speed range either in forward or reverse operation. They also show similar load rejection abilities. However, the single motor with a TLI has a better power quality aspect such as ripple current and total harmonics distortion (THD).

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.169-171
• /
• 2002

The western route of KEPCO's 765kV transmission line has been tentatively operating as 345kV voltage before commercial operation. After finishing the test operation of 765kV substation in 2002. KEPCO decided to operate the 765kV line for commercial operation. During the applying of 765kV voltage to the transmission line, double circuit transmission line will be operated with two voltage grades of 765kV and 345kV. Because the earthing switch is installed on both end of transmission line, we had estimated the electrostatic induction voltage and electromagnetic induction current before the line energizing in order to confirm the ratings of earthing switch. The induced voltage and current is very important for the maintenance of parallel circuit. This paper describes the simulation study of electrical phenomena such as electrostatic induction voltage from the parallel line and electromagnetic induction current from the parallel circuit. The transmission line model was developed by EMTP (Electro-Magnetic Transient Program).

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.208-211
• /
• 2003

The western route of KEPCO's 765 kV transmission line has been tentatively operating as 345 kV voltage before commercial operation. KEPCO decided to operate the 765 kV line for commercial operation after completing the test operation of 765 kV substation in 2002. In the process of energizing the line as 765 kV voltage, double circuit transmission line will be operated with two voltage grades of 765 kV and 345 kV. As the earthing switches are installed on both ends of the line, electrostatic induction voltage and electromagnetic induction current were calculated prior to the line energizing in order to confirm the ratings. The induced voltage and current are important for the maintenance of the parallel circuit. This paper presents the simulation results of electrical phenomena such as electrostatic induction voltage and electromagnetic induction current from the parallel line. The transmission line was modeled by EMTP (Electro-Magnetic Transient Program). The simulation results were compared with the measured results at the field.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.07a
• /
• pp.1-12
• /
• 2002

Desalination by reverse osmosis (RO), which first entered commercial use in the 1970s, was initially mainly used for treating brackish water. Technological progress led to the development of an RO membrane enabling single-pass seawater desalination. Toyobo succeeded in developing a single-pass seawater desalination RO module composed of hollow fiber type membranes made of cellulose triacetate in 1978, and then in 1979 began production of the first commercially available double-element module. This double-element module has many advantages suitable for seawater desalination. It has high chlorine tolerance and high salt rejection, derived from the properties of the membrane material, and it is highly resistant to fouling and scaling matters due to the unique flow pattern and fiber bundle configuration. These advantages help to explain why the Toyobo double-element module has been used so successfully at the many seawater desalination plants around the world. Since the 1980s, large plants capable of desalinating several tens of thousands of cubic meters a day have sprung up around the Mediterranean and In the Middle East. The Jeddah RO Phase I Plant, which has a capacity of 56, 800m$^3$/day, went into operation in 1989. In 1994, the same sized Phase II Plant came on stream, giving the plant a huge total capacity of 113, 600m$^3$/day. The plant constructor Mitsubishi Heavy Industries, Ltd. (MHI), and the RO membrane manufacturer Toyobo Co., Ltd. In 1998, the world's largest RO seawater desalination plant in operation, which has a capacity of 128, 000m$^3$/day and is run by Saudi Arabia's Saline Water Conversion Corporation (SWCC), went into operation at Yanbu. RO seawater desalination technology has thus already reached the stage of full-scale commercial use. In order to encourage its wider use, however, RO desalination needs to be made more economical by lowering construction and water treatment costs. Toyobo has therefore developed a new economical RO desalination system by a recovery ratio of 60% using a high-pressure module with a high product flow rate. In 2000, Toyobo high recovery membrane module was selected for the largest seawater desalination plant in Japan, which has a capacity of 50, 000m$^3$/day.

• Journal of Chest Surgery
• /
• v.23 no.6
• /
• pp.1118-1127
• /
• 1990

Arterial switch operation for repair of nineteen cases of transposition of the great arteries associated with ventricular septal defect and three cases with double outlet right ventricle with subpulmonary ventricular septal defect[Taussig-Bing type DORV] was performed from November 1987 to September 1990 at the Seoul National University Children`s Hospital. Sixteen of them were under six months of age, and three were under one year of age with body weight ranged from three to fourteen kilograms. Preoperative cardiac catheterization was done in eighteen patients, in which the pressure of the left ventricle was greater than 70% of the right ventricle in all but one. Patent ductus was associated in thirteen cases[68.4%] of TGA+VSD, and atrial septal defect or patent oval foramen was in sixteen cases. Four atrial septostomy, one modified Blalock- Taussig shunt, one pulmonary artery banding, one coarctoplasty using subclavian arterial flap, were perfomed before arterial switch operation. There were five hospital deaths, all in the. patients with transposition of the great arteries with ventricular septal defect[overall mortality rate 22.7%]. Lecompte Maneuver was used in all patients, and in all patient the U-shaped flap of coronary arteries were transposed to V-shaped cleavage created in the neoaorta. Arterial defect in the neopulmonary artery was covered with 0.0625% Glutaraldehyde fixed autogenous pericardium There have been no late deaths, Postoperative cardiac catheterization and angiocardiogram in four patients has revealed no stenosis in the neopulmonary artery or neoaorta with reasonable P[RV/LV], Anatomic correction for transposition and double outlet right ventricle with subpulmonary ventricular septal defect would seem to be a good operative alternative to intraatrial switch procedures, with the advantage of incorporating the left ventricle to systemic circulation.

• East Asian mathematical journal
• /
• v.31 no.2
• /
• pp.211-244
• /
• 2015

The arithmetic operation have double-sided character. One is calculation as a process, the other is understanding in results as an outcome of the operation. We harbored suspicion on students' misunderstanding in an outcome of the operation, because the curriculum has focused on the calculation, as a process of arithmetic operation. This study starts with the presentation of this problem, we tried to find the recognition ability and character in the arithmetic operation. We researched the recognition ability for 7th grade 27 students who have enough experience in arithmetic operation when studying in elementary school. And we had an interview with 3students individually, that has an error in understanding in results of arithmetic operation but has no error in calculation. We focused on 3students' detailed appearance of the ability to understand in results of arithmetic operation and analysed the changing appearance after recommending unit record using operation expression. As a result, we could find the abily to underatanding in results of arithmetic operation and applicability to recommend unit record using operation expression. Through these results, we suggested educational implications in understanding in results of arithmetic operation.

• Journal of Chest Surgery
• /
• v.36 no.8
• /
• pp.566-575
• /
• 2003

We reviewed our 18-year surgical experience of biventricular repair for double-outlet right ventricle. Material and Method: One hundred twelve consecutive patients (80 males and 32 females) who underwent biventricular repair for double-outlet right ventricle between May 1986 and September 2002 were included. We assessed risk factors for early mortality and reoperation. Reoperation-free survival rate and actual survival rate were analysed. Result: Most common type of ventricular septal defect was subaortic (n=58, 52%) and non-committed type was second most common (n=32, 29%). Four different surgical methods were used: intraventricular baffle repair (n=71 , 63%): right ventricle to pulmonary ariery conduit interposition or REV with left ventricle to aorta baffle repair (n=24, 21 .4%): arierial switch operation with left ventricle to pulmonary artery baffle (n=14, 12.5%): Senning atrial switch operation with left ventricle to pulmonary artery baffle (n=3, 2.7%). Thirty four patients(30%) underwent palliative procedures before definite repair. Twenty three patients (21%) required reoperations. There were 12 (10.7%) early deaths and 4 late deaths. Age younger than 3 months at repair (p=0.003), cardiopulmonary bypass and aortic cross clamp time (p=0.015, p=0.067), type of operation (arterial switch operation) (p <0.001) and type of ventricular septal defect (subpulmonic type) (p=0.002) were revealed as risk factors for early death in univariate analysis, while age under 3 months was the only significant risk factor in multivariate analysis. Patients younger than 1 year of age (p=0.02), pulmonary artery angioplasty at definitive repair (p=0.024), type of ventricular septal defect (non-committed) (p=0.001), type of operation (right ventricle to pulmonary artery conduit interposition and REV operation) (p=0.028, p=0.017) were risk factors for reoperation in univariate analysis but there was no significant risk factor in multivariate analysis. Follow-up was available on 91 survivals with a mean duration of 110.8$\pm$56.4 (2~201) months. 5, 10 and 15 year survival rates were 86.5%, 85% and 85% and reoperation free survival were 85%, 71.5%, 70%. Conclusion: Age under 3 months at repair, subpulmonic ventricular septal defect and arterial switch operation were significant risk factors for early mortality. Patients with non-committed ventricular septal defect and who underwent conduit interposition or REV operation were risk factors for reoperation. With careful attention to chose best timing and surgical approach depending on morphologic characteristics, biventricular repair for double outlet right ventricle can be achieved with good long-term outcome.