• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.436-437
• /
• 2008

Flexible CIGS thin film solar cell was fabricated using STS430 plate as a flexible substrate in this work. A diffusion barrier layer of $SiO_2$ thin film was deposited on STS430 substrate by PECVD followed by deposition of double layered Mo back contact. After depositing CIGS absorber layer by co-evaporation, CdS buffer layer by chemical bath deposition, ZnO window layer by RF sputtering and Al electrode by thermal evaporation, the solar cell fabrication processes were completed and its performance was evaluated. Corresponding solar cell showed an conversion efficiency of 8.35 % with $V_{OC}$ of 0.52 V, $J_{SC}$ of 26.06 mA/$cm^2$ and FF of 0.61.

• YAKHAK HOEJI
• /
• v.28 no.2
• /
• pp.89-95
• /
• 1984

Microorganisms having beta-latamase inhibitory activity were selected from soil samples collected from 63 spots throughout the country. Screening procedures consist of two steps. Those are growth inhibition test of penicillinase-producing Staphylococcus aureus by double-layered agar plate containing penicillin G as a substrate, and that of penicillin sensitive Staphylococcus aureus ATCC 6538 in the similiar condition including penicillinase. Finally, a strain was selected from a soil sample of Pa-ju, Kyeong-gi Do. This strain was classified as a Streptomyces sp. by ISP(International Streptomycete Project) and Bergey's manual.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.85-89
• /
• 2018

In this study, functional transparent conducting layers were investigated for Si-based photoelectric applications. Double transparent conductive oxide (TCO) films were deposited on a Si substrate in the sequence of indium tin oxide (ITO) followed by aluminum-doped zinc oxide (AZO). First, we observed that the conductivity and transparency of AZO dominate the overall performance of the double TCO layers. Secondly, the double layered TCO film (consisting of AZO/ITO) deposited by sputtering was compared to a AZO-only film in terms of their optical and electrical properties. We prepared three different AZO films: ITO:3min/AZO:10min, ITO:5min/AZO:7min, and ITO:7min/AZO:4min. The results show that the optical properties (transmittance, absorbance, and reflection) can be controlled by the film composition. This may provide a significant pathway for the manipulation of the optical and electrical properties of photoelectric devices.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.260-268
• /
• 2015

The thermal barrier coating (TBC) for inner wall of liquid-fuel rocket combustor consists of NiCrAlY as bonding layer and $ZrO_2$ as a top layer. In most case, the plasma spray coating is used for TBC process and this process has inherent possibility of cracking due to large difference in thermal expansion coefficients among bonding layer, top layer and metal substrate. In this paper, we suggest crack-free TBC process by using a precise electrodeposition technique. Electrodeposited Ni-P/Cr double layer has similar thermal expansion coefficient to the Cu alloy substrate resulting in superior thermal barrier performance and high temperature oxidation resistance. We studied the effects of phosphorous concentrations (2.12 wt%, 6.97 wt%, and 10.53 wt%) on the annealing behavior ($750^{\circ}C$) of Ni-P samples and Cr double layered electrodeposits. Annealing temperature was simulated by combustion test condition. Also, we conducted SEM/EDS and XRD analysis for Ni-P/Cr samples. The results showed that the band layers between Ni-P and Cr are Ni and Cr, and has no formed with heat treatment. These band layers were solid solution of Cr and Ni which is formed by interdiffusion of both alloy elements. In addition, the P was not found in it. The thickness of band layer was increased with increasing annealing time. We expected that the band layer can improve the adhesion between Cr and Ni-P.

• Clean Technology
• /
• v.28 no.2
• /
• pp.154-162
• /
• 2022

Microstructured Al@Al₂O₃ and Al@Ni-Al LDH (LDH = layered double hydroxide) core-shell metal-ceramic composites are prepared by hydrothermal reactions of aluminum (Al) metal substrates. Controlled hydrothermal reactions of Al metal substrates induce the hydrothermal dissolution of Al ions at the Al-substrate/solution interface and reconstruction as porous metal-hydroxides on the Al substrate, thereby constructing unique metal-ceramic core-shell composite structures. The morphology, composition, and crystal structure of the core-shell composites are affected largely by the ions in the hydrothermal solution; therefore, the critical physicochemical and surface properties of these unique metal-ceramic core-shell microstructures can be modulated effectively by varying the solution composition. A Ni/Al@Al₂O₃ catalyst with highly dispersed catalytic Ni nanoparticles on an Al@Al₂O₃ core-shell substrate was prepared by a controlled reduction of an Al@Ni-Al LDH core-shell prepared by hydrothermal reactions of Al in nickel nitrate solution. The reduction of Al@Ni-Al LDH leads to the exolution of Ni ions from the LDH shell, thereby constructing the Ni nanoparticles dispersed on the Al@Al₂O₃. The catalytic properties of the Ni/Al@Al₂O₃ catalyst were investigated for CO₂ methanation reactions. The Ni/Al@Al₂O₃ catalyst exhibited 2 times greater CO₂ conversion than a Ni/Al₂O₃ catalyst prepared by conventional incipient wetness impregnation and showed high structural stability. These results demonstrate the high effectiveness of the design and synthesis methods for the metal-ceramic composite catalysts derived by hydrothermal reactions of Al metal substrates.

• Parasites, Hosts and Diseases
• /
• v.23 no.2
• /
• pp.269-284
• /
• 1985

The metabolism of Entamoeba histolytica would be affected by various environmental factors, and alteration of the environment was known to afEect the fine structure of 5. histolytica. The present study was designed electronmicroscopically to investigate the ultrastructure and enzyme activities in the aEonic and conventional strains of 5. histolytica. The trophozoites of axenically cultivated HK-9 strain and conventional YS-27 and YS-49 strains of 5. histolytica were collected and liKed with 4% paraformaldehyde/0.1M cacodylate buffier(pH 74), After washing them by centrifugation, 1% warm agar was added in the sediment. Solidified agar with the trophozoites was cut into $lmm^3$ cubes, and incubated in the various substrates to observe enzyme activities. Then, the specimen was post-fixed with 3% glutaraldehyde/0.1M cacodylate buffer (PH 7.4) and 1% osmium tetroBide/0.1M cacodylate buffier (pH 7.4) , dehydrated in ascending ethanol series and embedded in epoxy resin. These were sectioned on an ultramicrotome and observed with a transmission electronmicroscope. The procedures for the observation of the fine structure were same as the above, except for the incubation in the substrate. The sections were stained with uranyl acetate and lead citrate. For the observation of the surface of the amoebae, scanning-electronmicroscopy was carried out. The results obtained in the present study are summarized as follows: 1. The fuzzy coat around double-layered plasma membrane of 5. histolytica was more irregularly and densely distributed in the conventional strains (YS-27, YS-49 strains) than in the axonic strain (HK-9 strain). 2. The endosomes, button bodies and chromatin material were surrounded by a double-layered nuclear membrane having scattered nuclear fores. The paranuclear body, mono- or double-layered vacuoles, vacuolar membrane whorls, rosette-like cylindrical bodies, aggregation of cylindrical bodies and helical bodies were found in the cytoplasm of the amoebae. Helical bodies and glycogen granules were generally abundant, while a few smooth endoplasmic reticula were observed in the cytoplasm. 3. Alkaline phosphatase activity was mainly demonstrated in the plasma membrane, limiting membranes of vacuoles and smooth endoplasmic reticula. ATPase activity was observed in the nucleus, limiting membranes of vacuoles and vacuolar membrane whorls. 4. Acid phosphatase activity was commonly demonstrated in the limiting membranes an contents of vacuoles, Iysosome-like organelles, plasma membrane and the button bodies in the nucleus. The activity was more weakly demonstrated in the HK-9 strain than in the other conventional strains of 5. histolytica. No peroBidase activity was observed in the amoeba strains employed in the present study. 5. With a scanning electron-microscope, no distinct structural differences were observed between the amoeba strains. All the trophozoite forms of the amoebae showed crater-like depressions and rugged features on the outer surface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.44-47
• /
• 2004

Fabrication of barrier layer on PES substrate and plastic OLED device by atomic layer deposition are carried out. Simultaneous deposition of 30nm of $AlO_x$ film on both sides of PES gives film MOCON value of 0.0615g/$m^2$.day (@38$^{\circ}C$, 100% R.H). Introduction of conformal $AlO_x$ film by ALD resulted in enhanced barrier properties for inorganic double layered film including PECVO $SiN_x$. Preliminary life time to 91% of initial luminance (1300 cd/$m^2$ ) for 100nm of PECVD $SiN_x$/30nm of ALD $AlO_x$ coated plastic OLED device was 260 hours.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.27-28
• /
• 2013

This study investigates the effect of a protective layer on the level of carbonation resistance of concrete. For the protective layer, a PE film, bubble sheets, double layered bubble sheets and styroform were placed in a mold before placing the concrete. In addition, PE film was retrofitted by attaching on the surface of the substrate concrete with a glue. Results showed that the carbonation depths of the control concrete were 4.6 mm and 5.2 mm at one week and two weeks exposure in an accelerated carbonation chamber, whereas the concrete with all types of protective layer except PE flim did not allow the ingress of carbon dioxide during the same period.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.5
• /
• pp.345-351
• /
• 2017

A double-layered anti-reflective coating with hydrophilic/abrasion-resistant properties was studied using anatase titanium dioxide($TiO_2$) and silicon oxycarbide($SiO_xC_y$) thin film. $TiO_2$ and $SiO_xC_y$ thin films were sequentially deposited on a glass substrate by DC sputtering and PECVD, respectively. The optical properties were measured by UV-Vis-NIR spectrophotometer. The abrasion-resistance and the hydrophilicity were observed by a taber abrasion tester and a contact angle analyzer, respectively. The $TiO_2/SiO_xC_y$ double-layer thin film had an average transmittance of 91.3%, which was improved by 10% in the visible light region (400 to 800 nm) than that of the $TiO_2$ single-layer thin film. The contact angle of $TiO_2/SiO_xC_y$ film was $6.9^{\circ}$ right after UV exposure. After 9 days from the exposure, the contact angle was $10.2^{\circ}$, which was $33^{\circ}$ lower than that of the $TiO_2$ single-layer film. By the abrasion test, $SiO_xC_y$ film showed a superior abrasion-resistance to the $TiO_2$ film. Consequently, the $TiO_2/SiO_xC_y$ double-layer film has achieved superior anti-reflection, hydrophilicity, and abrasion resistance over the $TiO_2$ or $SiO_xC_y$ single-layer film.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.63-70
• /
• 2004

The structural, electrical properties of $(Ba, Sr)TiO_3[BSTO]/RuO_2$ thin films were examined by the addition of amorphous BSTO layer between crystlline BSTO film and $RuO_2$ substrate. We prepared BSTO films with double-layered structure, that is, amorphous layers deposited at $60^{\circ}C$ and crystalline films. Crystalline films were prepared at 550 on amorphous BSTO layer. The thickness of the amorphous layers was varied from 0 to 170 nm. During the deposition of crystalline films, the crystallization of the amorphous layers occurred and the structure was changed to circular while crystalline BSTO films showed columnar structure. Due to insufficient annealing effect, amorphous BSTO phase was observed when the thickness of the amorphous layers exceeded 30 nm. Amorphous BSTO layer could also prevent the formation of oxygen deficient region in $RuO_2$ surface. Leakage current of total BSTO films decreased with increasing amorphous layer thickness due to structural modifications. Dielectric constant showed maxi-mum value of 343 when amorphous layer thickness was 30 nm at which the improvement by grain growth and the degradation by amorphous phase were balanced.