• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1660-1663
• /
• 2003

This paper present the characteristics of radiation pattern of microstrip slot antenna on the ground plane fed by microstrip line. It is proposed for resonance frequency at 10 GHz. We will analysis two shape of slot antenna; double L-shape slot antenna and U-shape slot antenna. In this case, we will compare far-field radiation pattern of two shape slot antenna. Far-field radiation pattern of double L-shape slot antenna is bi-directional nevertheless U-shape slot antenna is uni-directional. The microstrip slot antenna is propose to analyze far-field radiation pattern for use in the wireless communication systems

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.555-581
• /
• 2015

Triangular pyramid and Quadrangular pyramid elements for partial double-layer spherical reticulated shells of pyramidal system are investigated in the present study. Macro programs for six typical partial double-layer spherical reticulated shells of pyramidal system are compiled by using the ANSYS Parametric Design Language (APDL). Internal force analysis of six spherical reticulated shells is carried out. Distribution regularity of the stress and displacement are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of partial double-layer spherical reticulated shells of pyramidal system and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization of six spherical reticulated shells is calculated with the span of 30m~120m and rise to span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise to span ratio are discussed with contrast to the results of shape optimization. The optimal combination of main design parameters for six spherical reticulated shells is investigated, i.e., the number of the optimal grids. The results show that: (1) The Kiewitt and Geodesic partial double-layer spherical reticulated shells of triangular pyramidal system should be preferentially adopted in large and medium-span structures. The range of rise to span ratio is from 1/6 to 1/5. (2) The Ribbed and Schwedler partial double-layer spherical reticulated shells of quadrangular pyramidal system should be preferentially adopted in small-span structures. The rise to span ratio should be 1/4. (3) Grids of the six spherical reticulated shells can be optimized after shape optimization and the total steel consumption is optimized to be the least.

• 원예과학기술지
• /
• 제35권2호
• /
• pp.265-275
• /
• 2017

Selection of double-flowered plants at the seedling stage is one of the main purposes of stock breeding programs. Eight stock cultivars of Matthiola incana L. named 'Nobel', 'Cinderella', 'Pacific', 'Avalanche', 'Midblue', 'Lavender', 'Goddess' and 'Esfahan', with different percentage of double-flowered plants were used for examining the relationship with three morphological types of cotyledons. The results of a chi-square test indicated that in heart-shaped (HC) and cup-shaped cotyledon (CC) populations, the number of plants with double flowers was much more than that of single flowers and CC seedlings rarely produced single flowers. Therefore, increasing the number of CC seedlings can improve the percentage of double flowers. The highest and lowest numbers of CC seedling were observed in high double and single flower cultivars, respectively. Single flower cultivars showed the maximum count of dumbbell-shaped cotyledons. Chromosome pairing of these cultivars was evaluated using the squash technique. Aneuploid cells were found in 'Nobel' and 'Goddess' cultivars, which showed the highest percentage of CC seedling. Based on morphological measurements, the highest value of inflorescence size was observed in the seedlings with cup-shaped cotyledons.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.198-201
• /
• 2001

L자형 루프를 이용하여 주파수대역이 6-18 GHz인 동축-이중릿지도파관 변환기를 상용 소프트웨어인 HFSS를 이용하여 설계한 후 제작하였다. L자형 루프는 동축-구형도파관 변환기에 이미 이용되고 있는 구조로써, 이를 동축-이중릿지도파관 변환기에 적용한 것이다. 제작 후 측정결과 대역폭이 6-18 GHz로 3:1 이상을 만족하며, 최대 삽입손실이 -1.52 dB 이었다.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.49-57
• /
• 1999

An experimental study on double-concentric diffusion flame has been carried out in order to investigate the shape, the flame length, and the other characteristics of the flame. Flow visualization of the flame by the $TiO_2$ particles and also the emission measurements are conducted. The commercial grade LP gases are used as fuel. The inverse diffusion flames are formed at the center when the central air flow rate is about 0.1 L/min. With a larger flow rate of the central air jet than 0.2 L/min the flame turns to be an annular-shaped flame, which is very bright. When the central air flow rate increases over 2.4 L/min, the flame turns to blue and the flame tips are opened because of the lifting of the inner part of the flame. Because of this lifting and the incomplete combustion, the CO emission increases abruptly from 25 ppm to more than 150 ppm. On the contrary, the NOx emission is decreased.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.291-302
• /
• 2004

In this paper, load monitoring technologies using U-shape Magnetoelastic (EM or ME) sensors have been exploited systemically for the first time. The steel rod to be tested is the Japan 7 mm piano steel rod. The load dependence of the magnetic properties of the piano steel rod was manifested. Two experimental designs of U-shape magnetoelastic sensors were introduced, one with double pick-up concentric coils wound on the rod to be tested, the other with pick-up coil on one yoke foot. The former design is used to derive the correlation of the relative permeability with elastic tension, while the latter is aimed to reflect the stress induced magnetic flux variation along the magnetic circuit. Magnetostatic simulations provide interpretations for the yoke foot sensing technology. Tests with double pick-up coils indicate that under proper working points (primary voltages), the relative permeability varies linearly with the axial load for the Japan 7 mm piano steel rod. Tests with pick-up coil on the yoke foot show that the integrated sensing voltage changes quadratically with the load, and error is more acceptable when the working point is high enough.

• Structural Engineering and Mechanics
• /
• 제56권5호
• /
• pp.813-833
• /
• 2015

Spherical reticulated shells are widely applied in structural engineering due to their good bearing capability and attractive appearance. Parametric modeling of spherical reticulated shells is the basis of internal analysis and optimization design. In the present study, generation methods of nodes and the corresponding connection methods of rod elements are proposed. Modeling programs are compiled by adopting the ANSYS Parametric Design Language (APDL). A shape optimization method based on the two-stage algorithm is presented, and the corresponding optimization program is compiled in FORTRAN environment. Shape optimization is carried out based on the objective function of the minimum total steel consumption and the restriction condition of strength, stiffness, slenderness ratio, stability. The shape optimization of four typical Schwedler spherical reticulated shells is calculated with the span of 30 m~80 m and rise to span ratio of 1/7~1/2. Compared with the shape optimization results, the variation rules of total steel consumption along with the span and rise to span ratio are discussed. The results show that: (1) The left and right rod-Schwedler spherical reticulated shell is the most optimized and should be preferentially adopted in structural engineering. (2) The left diagonal rod-Schwedler spherical reticulated shell is second only to left and right rod regarding the mechanical behavior and optimized results. It can be applied to medium and small-span structures. (3) Double slash rod-Schwedler spherical reticulated shell is advantageous in mechanical behavior but with the largest total weight. Thus, this type can be used in large-span structures as far as possible. (4) The mechanical performance of no latitudinal rod-Schwedler spherical reticulated shell is the worst and with the second largest weight. Thus, this spherical reticulated shell should not be adopted generally in engineering.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.695-698
• /
• 1995

The shape and width of fuzzy membership function has an effect on performance of fuzzy controller. In this paper, fuzzy controller is proposed to improve the control performance of fuzzy controller. It has two fuzzy inference engine. The one is typical fuzzy inference engine, the other is proposed to infer optimal width of membership function in fuzzy controller from plant constant (K,T,L). To show the effectiveness of this fuzzy controller with double fuzzy inference engine, it is applied to plant (dead time + 1st order delay) with various plant constant.

• 한국식품과학회지
• /
• 제41권5호
• /
• pp.597-601
• /
• 2009

간성상세포(HSC)는 간섬유화와 간경변에 중요한 역할을 한다고 알려져 있다. 간손상에 의해 둥근 모양의 간성상세포는 활성화되어 세포외기질(ECM)을 생산하는 myofibroblast와 같은 모양으로 활성화 된다. 활성화된 간성상세포의 특징은 빠른 증식 속도와 collagen과 같은 세포외 기질의 생산이다. 활성화된 간성상 세포의 제거방법은 apoptosis를 유도하는 것이다. 가자 추출물은 정상 간세포(rat primary hepatocyte), 간세포주(HepG2) 및 활성화된 간성상세포주인 T-HSC/Cl-6에 $1,000{\mu}g/mL$의 농도까지 처리하여 세포독성을 확인하였다. 그 결과 hepatocyte나 HepG2에서는 최고 농도에서도 독성이 없었으나 T-HSC/Cl-6는 U-shape 모양으로 사멸하는 것을 확인 하였다. T-HSC/Cl-6의 사멸이 apoptosis에 의한 것인지를 Annexin-V/PI double staining을 통하여 확인한 결과 apoptosis에 의해 T-HSC/Cl-6의 사멸이 일어나는 것을 확인하였다.

• 소성∙가공
• /
• 제13권1호
• /
• pp.15-20
• /
• 2004

본 연구에서는 자동차용 판재 성형시 발생하는 스프링백을 정확히 예측하기 위하여, 수정된Chaboche형에 기초한 혼합형 등방-이동경화규칙이 개발되었다. 또한 판재의 이방성을 위하여 최근 개발된 Barlat의 YId2000-24 비이차 비이방성 항복 함수가 이용되었다. 단순인장실험과 인장/압축(압축/인장) 실험에 의하여 Bauschinger 및 transient 거동과 비이방성이 측정되었으며, 유한요소해석에 의한 구성방정식의 검증을 위해 실제 자동차 부품을 부분 변형시킨 double S-rail이 제작되었다. 수정된 Chaboche 형 조성방정식과 비등방 항복함수를 적용한 유한요소에 의한 수치해석의 결과는 굽힘에 의한 스프링백과 비틀림에 있어서 실험과 잘 일치함을 알 수 있었다.