• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.557-561
• /
• 2014

The aim of the present study was to improve dosing of lacosamide, a functionalized amino acid used as an antiepileptic agent, from twice daily to once daily for the convenience of patients. A sustained-release lacosamide tablet was developed and dissolution testing was employed to determine in vitro release behavior using water or buffer solutions at pH 1.2, 4.0, or 6.8. Lacosamide was released for 12 h from the sustainedrelease (SR) tablet, as compared to complete release within 1 h from an immediate-release $Vimpat^{(R)}$ tablet. Each formulation (100 mg) was orally administered to six beagle dogs and six mini-pigs under fasted conditions, and pharmacokinetic parameters such as the area under the concentration time curve ($AUC_t$), the maximum plasma concentration ($C_{max}$), and the time at which this occurred ($T_{max}$) were calculated. These results showed similar values for $AUC_t$, $C_{max}$, and $T_{max}$ following oral administration of immediate-release ($Vimpat^{(R)}$) and SR lacosamide tablets.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1221-1224
• /
• 2013

The atomic layer deposition (ALD) of $ZrO_2$ was conducted in ultrahigh vacuum (UHV) conditions. The surface was exposed to $ZrCl_4$ and $H_2O$ in sequence and the surface species produced after each step were identified in situ with X-ray photoelectron spectroscopy (XPS). $ZrCl_4$ is molecularly adsorbed at 140 K on the $SiO_2$/Si(111) surface covered with OH groups. When the surface is heated to 300 K, $ZrCl_4$ loses two Cl atoms to produce $ZrCl_2$ species. Remaining Cl atoms of $ZrCl_2$ species can be completely removed by exposing the surface to $H_2O$ at 300 K followed by heating to 600 K. The layer-by-layer deposition of $ZrO_2$ was successfully accomplished by repeated cycles of $ZrCl_4$ dosing and $H_2O$ treatment.

• 대한수의학회지
• /
• 제44권3호
• /
• pp.367-371
• /
• 2004

This report describes the determination of ceftiofur residues in milk from treatment of lactating dairy cattle by intramuscular injection of three consecutive daily doses of about 1 mg /kg BW, the recommended label dosing. The separation of ceftiofur was achieved on $C_1_8$ reverse phase column. The mobile phase consisted of 0.1% trifluoracetic acid in water (A) and 0.05% acetic acid in acetonitrile (B) and grediently flowed at the flow rate of 0.4 mL/min. As a result of analysis of blank raw bovine milk samples, matrix interference was not shown. Limit of detection and limit of quantitaion was 0.5 ng/mL and 1 ng/mL, respectively. The values of precision and recovery satisfied the guideline of National Veterinary Research and Quarantine Service (NVRQS, Korea). The mean residual concentration of ceftiofur in milk did not exceed 3.71 ng/mL when ceftiofur was administered intramuscularly to lactating dairy cattle for 3 consecutive days at 1 mg/kg of BW per day. It is much lower than the proposed MRL (100 ng/mL) of ceftiofur in milk.

• 상하수도학회지
• /
• 제14권4호
• /
• pp.318-327
• /
• 2000

Sludge production from water treatment plants is increasing each year because water resources deterioration is proceeding and water supply facilities are growing due to water demand increase. Water treatment plant sludges can be modified to soil cover in sanitary landfilling site through the lime treatment and other alternatives. The compression strength of $1.0kg/cm^2$ is necessary for the dozer operation on soft son cover material at municipal landfilling site. Modified sludge was experimentally produced in this study with lime, bentonite, loess, and activated loess dosing. X-ray diffraction patterns of the limed water treatment plant sludge confirmed the presence of calcium carbonate and ettringite. Unconfined compression strength properties of modified sludges showed material property improvement applicable for soil cover alternatives. When adding 20-30% activated loess to water treatment plant sludges. the modified sludges could reach the compression strength for cover soil after 7 days solidification reaction, but decrease of compression strength was intentioned in 28 days reaction period. Solidification effect of the modified sludge with activated loess was observed through the scanning electron microscope.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1349-1352
• /
• 2009

We report the results of the surface chemistry of deuterized ethanol exposed Zircaloy-4 (Zry-4) surfaces with various amount of $C_2D_5$OD exposures at 190 K. This system was examined with Auger electron spectroscopy (AES) and temperature programmed desorption (TPD) techniques. In TPD study, $D_2$ was evolved at two different desorption temperature regions accompanying with broad desorption background. The lower temperature feature at around 520 K showed first-order desorption kinetics. The high temperature desorption peak at around 650 K shifted to lower desorption temperature as the exposure of $C_2D_5$OD increased. The Zr(MNV) Auger peak shifted about 2.5 eV from 147 eV to lower electron energy followed by 300 L of $C_2D_5$OD dosing. This implies metallic zirconium was oxidized by deuterized ethanol adsorption. After stepwise annealing of the oxidized Zry-4 sample up to 843 K, the shifted Zr(MNV) peak was gradually shifted back to metallic zirconium peak position. After the sample was heated to 843 K, the oxygen content near the Zry-4 surface was recovered to clean surface level. The concentration of carbon, however, was not recovered by annealing the sample.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.483-490
• /
• 2009

The objective of this development project is to localize an automatic molten metal supplier that has been distributed by WESTOMAT, Germany, throughout the world. To achieve this purpose, an energy-saving pressurized dosing furnace and molten metal differential pressure control system that Is able to automatically supply a determined quantity of aluminum molten metal were developed. The localized equipment was installed in a site. Also, the results of the test operation of this equipment can be summarized as follows: It was able to improve the productivity because there were small decreases in supplying speeds and small losses in wastes compared to the existing mechanical molten metal supplier. Also, it was able to minimize the cost in maintenances due to the direct application of high temperature molten metals to molds. In addition, there were small energy losses due to the use of high thermal insulators compared to the existing reverberating furnace and able to prolong the life-time of furnaces and produce good quality nonferrous metals because it represented small carbon refractories and alumina in applied molten metals. Furthermore, it demonstrated no particular differences by objectively comparing it with the product by WESTOMAT.

• 약학회지
• /
• 제58권2호
• /
• pp.107-111
• /
• 2014

Unused medication disposal is a problem due to the cost of disposing as well as potential risk of inadvertent dosing. Investigating medication returns is expected to suggest areas for targeting interventions to reduce medication waste. Therefore, the aim of this study was to examine types of medications and identify the expiration date of the medications returned to the community pharmacies through "Drug-Take Back" program. Method: From October 10, 2012 to November 14, 2012, the medications returned to the 58 community pharmacies in Korea were examined. Results: A total of 22,160 g of pill medications were collected; 52.8% for prescription drugs and 47.2% for non-prescription drugs, respectively. The weight of the expired pill medications was more than 5 times that of the non-expired pill medications. On the other hand, 6,168 ml of liquid medications were returned; 80.0% for prescription medication and 20.0% for non-prescription medications, respectively. Of the total oral liquid medications, the volume of the expired medications was more than 5 times that of the non-expired medications. Conclusion: The majority of medications returned to the community pharmacies were prescription drugs rather than non-prescription drugs. In addition, most of the drugs were expired when they returned.

• Archives of Pharmacal Research
• /
• 제24권4호
• /
• pp.323-326
• /
• 2001

Previous studies have demonstrated that CW252053, a quinazoline antifolate, exhibits potent inhibitory activity against thymidylate synthase (TS) as well as cytotoxic activity against tumor cell lines in vitro. In this studys, we evaluated the in vivo antitumor efficacy of CW252053 in the mouse tumor model. Female B6D2F$_1$ mice were injected with LY3.7. 2C TK-/- (thymidine kinase deficient mouse Iymphoma) cells into the gastrocnemius muscle. Then, CW252053 was administered twice daily by intraperitoneal injection for 10 days, and tumor growth was monitored daily by leg diameter measurement. All animals in the vehicle, 5-FU, and low dose (30mgmg/kg CW252053 treated groups died between days 12 and 23 because of the tumor burden. In contrast, dosing with 60 mg/kg of CW252053 produced a cure rat against tumor growth of 37.5% and a survival rate of 50%. Even more significantly, a higher dose of CW252053 (120 mg/kg) elicited both a 100% cure rate and a 100% survival rate at the termination of the study, confirming that this compound has very potent in vivo antitumor activity against tumor growth. During the experimental period of this study no signs of toxicity were observed even at the high CW252053 dosage rate of 120 mg/kg.

• Archives of Pharmacal Research
• /
• 제22권6호
• /
• pp.565-570
• /
• 1999

DW2282,(S)-(+)-4-phenyl-1-[1-(4-aminobenzoyl)-indoline-5-sulfonyl]-4,5-dihydro-2-imidazolone hydrochloride, is a new anticancer agent which is thought to exhibit a characteristic mechanism of action in the inhibition of tumor growth. In this study, we estimated the toxicities of DW2282 in mice. When mice were orally dosed for five consecutive days at the dosages of 50, 100 and 150 mg/kg, DW2282 did not induced methemoglobinemia and hypoglycemia at any of these doses. However, increased ALT and AST values were observed in the 150 mg/kg dosing group, and white blood cells (WBC) were significantly decreased at all doses. However, the changes in WBC count, ALT and AST immediately reversed after the cessation of drug administration. In addition, we found that DW2282 did not cause an increase in hemolysis in human blood. Taken together, these data suggested that DW2282 may have a relatively low level of toxicity, and that there may be a quick recovery from any toxicity it dose produce.

• 약학회지
• /
• 제43권6호
• /
• pp.729-735
• /
• 1999

Scopolia rhizome is mistaken as an atractylodes rhizome because of their similarities in shape. That is why atractylodes rhizome imported from China sometimes contain scopolia rhizome, which is very toxic. 8 persons were intoxicated atractylodes after taking imported atractylodes rhizome which is tainted. In kampo medicine prepared with such imported atractylodes rhizome, the level of tropane alkaloids ranged from 1.12∼4.34 mg/dose. In this study, we tried to investigate the tissue distribution of scopolia rhizome in rats. The extracts of scopolia was administered orally to rats (a single dose of 10mg/kg, 20mg/kg and 7 days repeated dose of 10mg/kg). Their blood was collected at 0.5, 1, 2, 4, 6 hrs, and liver, kidney, lung and spleen were collected after 6 hrs. The tissue homogenate was applied to solid phase extraction column for the determination of tropane alkaloids. After the oral administration of 20mg/kg scopolia extracts, l-hyoscyamine was detected in rat blood to 2 hrs after dosing. The concentration of tropane alkaloids was the highest in liver followed by lung, kidney and spleen. However, lung, kidney and spleen were similar in amount.