• 대한의용생체공학회:의공학회지
• /
• 제37권4호
• /
• pp.147-151
• /
• 2016

Tibial defect, or fracture is very routine musculoskeletal case which brings fully uncomfortable and painful situations to patient. Moreover, it has long hospitalization period because of its risk of non-union. There are many studies using ultrasound, vibration, and laser for bone regeneration to figure out fast bone healing. Among them, Low Level Laser Therapy (LLLT) is already known that it is very easy to treat and may have positive effect for bone regeneration. However, LLLT has uncertain energy dose because of scattering and absorption of laser in tissue. In this study, we used interstitial LLLT to treat tibial defect in animal study. The Interstitial LLLT can overcome some limitations caused by laser scattering or absorption in tissue medium. The results were evaluated using u-CT which can calculate X-ray attenuation coefficient and bone volume of bone defect area. These results showed that interstitial LLLT may affect fast bone healing process in early phase.

• 한국진공학회지
• /
• 제4권2호
• /
• pp.142-149
• /
• 1995

본 연구에서는 새로운 장전자 방출법(DOFEC법)으로 W(210)면의 수소 흡착에 의한 일함수의 변화, heat of desorption에 대하여 연구하였다. 텅스텐(210)면에 수소가 흡착될 때 흡착율에 따라 일함수가 증가하다가 다시 감소하는데 이것은 수소가 처음에는(210)면의 step((100)면)에 흡착되고 dose를 증가시킴에 따라 terrace((110)면)에 흡착되기 때문임을 알았다. 즉, terrace보다 step의 sticking coefficient가 더 크며 zero coverage에서의 그 비는 2.57이며 이는 타 연구 결과와 잘 일치한다. (210)면의 step과 terrace의 수소 흡착에 대한 일함수의 정량적인 변화량 그리고 수소 dose량에 대한 각각의 면에 대한 상대적인 흡착율을 얻었으며, 이 결과는 독립된(110)면 또는 (100)면의 결과와 잘 일치됨을 알았다. 또한 이 결과는 흡착 실험에 있어서 dose량을 흡착률로 환산하는데 사용될 수 있다. 텅스텐(210)면에는 4개의 흡착 site가 존재하며 이 site들 중 $\beta$2과 $\beta$4 state는 second order 탈착 과정을 따르며 $\beta$1과 $\beta$3 state는 first order 탈착과정을 따른다. 따라서 텅스텐(210)면에는 수소가 해리적 흡착을 함과 동시에 비해리적 흡착도 함을 알았으며(210)면의 각 흡착 site를 이에 대응되는 (100)면과 (110)면의 흡착 site와 비교 검토하였다.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1282-1288
• /
• 2020

In the first study, the Radon emanation and radiological hazards associated with radionuclides in soil samples, collected from 9 various date palm farms located in 3 different districts in Saudi Arabia were determined through a high purity Germanium (HPGe) gamma-ray spectrometer. The estimated average values of Radon emanation coefficient and Radon mass exhalation rate for soil samples were 0.535 ± 0.016 and 50.063 ± 7.901 mBqkg^-1h^-1, respectively. The annual effective dose of radionuclides in all sampling locations was found to be lower than UNSCEAR's recommended level of 0.07 mSvy^-1 for soil in an outdoor environment. In the secondary study, gross α and gross β activities in soil and date palm pits samples were measured by a low background α/β counting system. Average values of gross α and gross β activities in soil and date palm pits samples were 5.761 ± 0.360 Bqkg^-1, 38.219 ± 8.619 Bqkg^-1 and 0.556 ± 0.142 Bqkg^-1, 24.266 ± 1.711 Bqkg^-1, respectively.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.589-596
• /
• 2020

Many components in the assembly section of Sodium-cooled Fast Reactor are made of good corrosionresistant 316 LN Stainless Steel material. To avoid self-welding of the components with the coolant sodium at elevated temperature, hardfacing is inevitable. Ni-based colmonoy-5 is used for hardfacing due to its lower dose rate by Plasma Transferred Arc process due to its low dilution. Since Ni-Cr-B-Si alloy becomes very fluidic while depositing, the major height of the weld overlay rests inside the groove. Hardfacing is also done over the plain surface where grooving is not possible. Therefore, grooved and ungrooved hardfaced specimens were prepared at different travel speeds. Fe content at every 100 ㎛ of the weld overlay was studied by Energy Dispersive Spectroscopy and also the micro hardness was determined at those locations. A correlation between iron dilution from the base metal and the micro hardness was established. Therefore, if the Fe content of the weld overlay is known, the hardness at that location can be obtained using the correlation and vice-versa. A new correlation between micro hardness and dilution coefficient is obtained at different locations. A comparative study between those specimens is carried out to recommend the optimum travel speed for lower dilution.

• 한국산업보건학회지
• /
• 제18권1호
• /
• pp.80-90
• /
• 2008

This study was carried out to investigate the correlation of urinary NMF concentration in workers exposed to DMF and concentration of DMF in the workplace. Samples were collected in workers exposed to high dose solvent in the synthetic leather factory by using silicagel tubes for 5-15 minutes, and were analyzed by GC. Geometric mean concentrations of DMF in the workplaces were 4.67 ppm in normal operation and 63.95 ppm in high exposure operation. The concentration of case uppers and machine cleaning process were more than 100 ppm in short time. The correlation of urinary NMF in workers and DMF in workplace was statistically significant in normal operation and high exposure operation. Correlation coefficient are 0.215(p<0.05) and 0.263(p<0.05). The result implied that STEL of DMF should be established in normal operation processes as well as high exposure operation processes.

• 한국물환경학회지
• /
• 제33권4호
• /
• pp.441-448
• /
• 2017

Microcystis aeruginosa (M. aeruginosa) is a cyanobacterium species that can form harmful algal blooms in freshwater bodies worldwide. The use of Artemisia asiatica extracts to control M. aeruginosa inhibition will be environmentally friendly and promising. Artemisia asiatica extracts removed successfully upto 88% of M. aeruginosa pH 8 at $25^{\circ}C$ of temperature. These results was indicated that the amount of 2.24 g/L Artemisia asiatica extracts was removed 1g dryweight/L of M. aeruginosa. The kinetic data showed substrate inhibition kinetics and maximum growth rate was obtained when the M. aeruginosa was grown in medium containing 2.5 g/L of initial concentration of Artemisia asiatica extracts. In the various growth control models, Luong model showed the highest correlation coefficient of 0.9916. Therefore, the Luong model was the most suitable control model for the growth control of M. aruginosa using Artemisia asiatica extracts. In conclusion, the growth control of M. aruginosa using Artemisia asiatica extracts can be applied in the field without controlling the temperature and pH of rivers and streams, and it is possible to control the growth of M. aruginosa efficiently in a short time. The natural extract, Artemisia asiatica extracts, can be a promising inhibition due to its high efficiency and low dose requirements.

• 대한한의학회지
• /
• 제17권2호
• /
• pp.264-276
• /
• 1996

This study was carried out to evaluate the effect of Samhwasan on the Na-K-ATPase activity of heart muscle. The Na-K-ATPase activity was prepared from rabbit heart ventricles. Samhwasan markedly inhibited the Na- K - ATPase activity in a dose-dependent manner with an estimated $I_{50}$ of 0.56%. Hill coefficient was 1.70, indicating that the enzyme has more than one binding site for the Samhwasan. Inhibition of enzyme activity by Samhwasan increased as pretreatment time was prolonged. Inhibition by the drug was not affected by a change in enzyme protein concentration. Kinetic studies of substrate activation of the enzyme indicated classical noncompetitive inhibition, showing significant reduction in Vmax without a change in Km value. Inhibitory effect by Samhwasan was not altered by changes in concentration of $Mg^{2+}$, $Na^+$ or $K^+$, dithiothreitol. a sulfhydryl reducing reagent, did not protect the inhibition of Na-K-ATPase activity by Samhwasan combination of Samhwasan and ouabain showed a cumulative inhibition fashion. These results suggest that Samhwasan inhibits Na-K-ATPase activity of heart ventricles with an unique binding site different from that of ATP, $Mg^{2+}$, $Na^+$ or $K^+$ and ouabain.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.70-74
• /
• 2003

The heterogeneous bioluminescence immunoassay for digoxin was developed using photoprotein, native aequorin as a label and the site-directed immobilization technique based on avidin/biotin interaction. Aequorin is a bioluminescence protein, originally isolated from the jellyfish Aequoria Victoria and an attractive label in analytical applications because of sensitive detection due to virtually no background bioluminescent signal. Digoxin is a cardioactive drug, and its therapeutic level in serum is at low concentration with very narrow therapeutic index. The aequorin-digoxigenin conjugates were synthesized by the N-hydroxysuccinimide ester method and characterized in terms of bioluminescent residual activity. The resulting dose-response curve shows that the detection limit is $1.0\;{\times}\;10^{-10}\;M$ and a dynamic range is three orders of magnitude, which was obtained by $1.0\;{times}\;10^{-10}\;M$ conjugate and 0.9 μg/mL anti-digoxin antibody. Three structurally similar molecules to digoxin were examined for their cross-reactivity. None of these three compounds showed any crossreactivity with digoxin antibody employed in this study. Standard amounts of digoxin corresponding to the therapeutic range were spiked into the each serum solution. Study of the serum matrix effect indicated that correlation coefficient shows good agreement between luminescence light intensity between in buffer and in serum.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.115-118
• /
• 2004

We have examined the feasibility of using the specific interaction between mistletoe lectin I (ML I) and ${\beta}$-Dgalactose instead of the anti-ML I antibody in developing a homogeneous type competitive binding assay for ML I. We also have examined the feasibility of adapting the biotin/avidin mediated homogeneous assay for this system. Alkaline phosphatase (AKP) was employed as a single substrate enzyme label. The dose-response curve shows a detection range of 1-25 ${\mu}$g/mL and a linear response with a correlation coefficient of 0.99. To demonstrate the analytical utility of this method, 10 ${\mu}$g/mL of ML I was spiked into distilled water. The results show that the mean recovery was 10.03 ${\mu}$g/mL with an SD of 0.18. The difference between the spiked value and the mean recovery was 0.03 ${\mu}$g/mL, with a relative error of 0.3 and 1.6 % of RSD.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.810-816
• /
• 2017

A graphite calorimetry system was built and tested under irradiation. The noise level of the temperature measurement system was approximately 0.08 mK (peak to peak). The temperature of the core part rose by approximately 8.6 mK at 800 MU (monitor unit) for 6-MV X-ray beams, and it increased as X-ray energy increased. The temperature rise showed less spread when it was normalized to the accumulated charge, as measured by an external monitoring chamber. The radiation energy absorbed by the core part was determined to have values of $0.798J/{\mu}C$, $0.389J/{\mu}C$, and $0.352J/{\mu}C$ at 6 MV, 10 MV, and 18 MV, respectively. These values were so consistent among repeated runs that their coefficient of variance was less than 0.15%.