• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.180-181
• /
• 2011

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.302-303
• /
• 2011

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.139-142
• /
• 2001

The one of important parameter involved in the calculation of internal radiation dose to the human body is the biological half-life of the radionuclide. The biological half-life is population specific and may differ from one population group to another. So the effective half-life of tritium exposure based on urinal bioassay measurement of Wolsong Nuclear Power Plants was investigated and studied.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.566-570
• /
• 1997

The effect of average gamma energy on the external radiation dose has been analyzed. Cloud- and groundshine have been calculated according to the average gamma energy. Monte Carlo integration method was used for the calculation of cloudshine and Romberg quadrature method was adopted for groundshine. The analysis shows that the external gamma exposure is strong]y dependent on the gamma energy and the distribution of radiation sources.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.56-56
• /
• 2003

For the treatment of superficial tumors like squamous cell carcinoma of the head and neck, 6 MV photon beam is not appropriate and a spoiler is widely used to increase dose in the buildup region, while preserving the skin sparing effect. However, commercially available treatment planning systems assume a normal unspoiled beam, thereby cannot predict the buildup dose with spoiler accurately. We aimed to implement a Monte Carlo (MC) based planning system to apply it to the radiation treatment of head and neck. Lucite with thickness of 10-mm was used for the beam spoiler with Siemens Primus 6 MV photon beam. BEAM/DOSXYZ MC system was employed to model the linac and the spoiler. To verify the calculation accuracy of MC simulations, the percent depth doses (PDDs) and profiles with and without spoiler were measured using a parallel-plate chamber. For the MC based planning, we adopted a hybrid interface system between Pinnacle (Philips, USA) and BEAM/DOSXYZ to support treatment parameters of Siemens linac and the spoiler. The measurements of PDDs and profiles agreed with the corresponding MC simulations within 2% (lSD), which demonstrate the reliability of our MC simulations. The spoiler generated electrons make a contribution to the absorbed dose up to depth of 2cm, which shows that the dominant source of increased dose from spoiler system is the contaminating electrons created by the spoiler. The whole procedures necessary for MC based treatment planning were performed seamlessly between Pinnacle and BEAM/DOSXYZ system. This ability helps to increase the clinical efficiency of the spoiler technique. In conclusion, we implemented a MC based treatment planning system for a 6 MV photon beam with a spoiler. We demonstrate sophisticated MC technique makes it possible to predict dose distributions around buildup region accurately.

• Progress in Medical Physics
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2003

In this work we developed a EGS4 control code to calculate the dose distributions for high energy electron beams in water phantom applied longitudinal magnetic field. We reviewed the electron's motion in magnetic field and delivered equations for direction changs of the electron by the external magnetic field. The mathematical results are inserted into the EGS4 code system to account for the presence of external magnetic fields in phantom. The electron pencil beam paths of 6 MeV in water phantom are calculated for magnetic fields of 1-3 T and the dose distributions for a field of 1.0 cm in diameter are calculated for magnetic fields of 0.6-1 T using the code. From the results of path calculations we found that the lateral ranges of the electrons are reduced in the magnetic field of 3 T. For a field of 1 cm diameter and a magnetic field of 1 T, the small dose enhancement near the range of the electrons on the depth dose and the penumbra reduction of 0.15 cm on the beam profile are observed. We discussed and evaluated the results from the theoretical concepts.

• Journal of Pharmacopuncture
• /
• v.23 no.1
• /
• pp.18-24
• /
• 2020

Objectives: Pain is considered as a cause of sickness and the most prevalent symptom which makes people visit a physician. Nowadays, combination therapy is becoming useful to relieve chronic and postsurgical pain. The aim of this study was to study the promethazine (as an antihistamine) interactions with antinociceptive effect of diclofenac (as a non-steroidal anti-inflammatory drugs). Methods: In initial part of the study, we investigate the analgesic effect of diclofenac. Using writhing test, we demonstrate that diclofenac significantly reduces writhe response induced by acetic acid in a dose-dependent manner. In this study, we evaluate the combination effect of promethazine on diclofenac analgesic effect. Results: We observed that diclofenac inhibited pain in the dose dependent manner which means that by increasing dose of diclofenac a significant decrease in pain was observed. This experimental setup allowed calculation of the dose that caused 50% antinociception (ED50) for diclofenac. The ED50 for diclofenac in this study was determined to be 9.1 mg/kg according our previous study. Additionally, promethazine was showed a dose-dependent inhibition of writhes. The combination of different doses of promethazine (2, 4, 6 mg / kg) with diclofenac ED50 (9.1 mg / kg) was injected to mice. Promethazine 4 and 6 mg / kg in combination with diclofenac had significantly led to increase analgesic effect of diclofenac. Conclusion: In conclusion, these results add important information to the existing knowledge on combination of diclofenac and antihistamine in pain therapies to be used in clinical practice and maybe helpful in designing the future guidelines.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.2018-2025
• /
• 2019

This study systematically compared two hybrid deterministic/Monte Carlo transport codes, ADVANTG/MCNP and MAVRIC, in solving a difficult shielding problem for a real-world spent fuel storage cask. Both hybrid codes were developed based on the consistent adjoint driven importance sampling (CADIS) methodology but with different implementations. The dose rate distributions on the cask surface were of primary interest and their predicted results were compared with each other and with a straightforward MCNP calculation as a baseline case. Forward-Weighted CADIS was applied for optimization toward uniform statistical uncertainties for all tallies on the cask surface. Both ADVANTG/MCNP and MAVRIC achieved substantial improvements in overall computational efficiencies, especially for gamma-ray transport. Compared with the continuous-energy ADVANTG/MCNP calculations, the coarse-group MAVRIC calculations underestimated the neutron dose rates on the cask's side surface by an approximate factor of two and slightly overestimated the dose rates on the cask's top and side surfaces for fuel gamma and hardware gamma sources because of the impact of multigroup approximation. The fine-group MAVRIC calculations improved to a certain extent and the addition of continuous-energy treatment to the Monte Carlo code in the latest MAVRIC sequence greatly reduced these discrepancies. For the two continuous-energy calculations of ADVANTG/MCNP and MAVRIC, a remaining difference of approximately 30% between the neutron dose rates on the cask's side surface resulted from inconsistent use of thermal scattering treatment of hydrogen in concrete.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.813-819
• /
• 2021

In this study, the shielding rate of L-block-type shielding equipment used for radiation protection when radioactive fluorine is injected into the human body and the dose distribution of the space in the injection room were calculated using the Monte Carlo method. The shielding rate of the body and window parts of the L-block-type shielding equipment was 99.99%. The dose distribution calculated at a distance of 1 m was relatively high at 135°, 45°, 225°, 315°, and 180° of the XZ plane, and was calculated to be very low at 0°, 90°, and 270°. In the YZ plane, it was relatively high at 135°, 180°, and 225°, and was calculated very low at the remaining angles. The AZ and BZ planes also showed similar results to the YZ plane. In addition, it was confirmed that the shielding rate was the best in the range of 225° to 315° through the dose distribution in the horizontal direction of the source and the 45° direction above the source. These results can be used as basic data necessary for radiation protection of radiation workers.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.201-206
• /
• 1998

IMRT optimization method on multiple slice has been developed by using gradient based algorithm. On about 10-30 CT slices including treatment region of a patient, dose optimization has been performed slice by slice to meet the condition that each organ should be exposed below maximum tolerable doses and that the tumor dose within the range of 100$\pm$5 %. Field size was limited to 8$\times$8 cm$^2$ and in this condition, beam divergence was not taken into account to calculate dose distribution. Total dose distribution was calculated by superposing each beamlet whose dose distribution had been precalculated. In order to investigate beam number dependency, dose optimization was performed for one, three, five, seven, and nine coplanar beams and then each optimization index was evaluated. It is found that optimization time was proportional to number of slices to be optimized, and the most efficient plan was obtained from the case of three-to-seven incident beams with respect to calculation time and optimization index. In conclusion, dose optimization of multiple slice was able to be obtained by repeating dose optimization of single slice under condition that the beam size is not too large to ignore beam divergence. And it turns out that result of dose optimization was so sensitive to the position of isocenter that some method to optimize isocenter position is needed to improve it.