• 제목/요약/키워드: Dose Area Product

검색결과 88건 처리시간 0.023초

진단용 X선을 이용한 방사선검사에서 차폐체 모양과 부가필터 변화에 따른 난소의 선량 분석 (A Dose Analysis on the Ovary According to the Type of Shielding Material and the Change of Additional Filter in Radiography Using Diagnostic X-ray)

  • 최준호
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제42권6호
    • /
    • pp.429-434
    • /
    • 2019
  • The gonads are directly affected by radiation exposure during radiography of the pelvis, abdomen, and spine. Exposure of the gonads to radiation can cause genetic mutations and can result in the occurrence of malignant tumors. In this study, we created three types of shielding material shapes for shielding of the ovaries, which are the gonads of female during radiography of the pelvis, and comparative evaluations using shadow shielding methods. The source surface distance(SSD) was 100 cm and the field size was 42 cm × 43 cm. The three types of shielding material shapes(type 1, 2 and 3) were assessed and the entrance surface dose in the ovaries were measured. The thickness of the shielding material was expanded from 0.3 mm to 2.4 mm and after five repetitions, radiation values were measured and mean values were calculated. The mean dose were 3.09 mGy for type 1, 3.54 mGy for type 2, and 3.19 mGy for type 3, indicating that the measurements were the lowest for type 1. When an additional filter of 0.2 Cu + 1 Al was used, the dose were 3.72 mGy for type 1, 5.43 mGy for type 2, and 4.05 mGy for type 3, indicating that the measurements were the lowest for type 1. The results show that, even if the shielding material is not thick, in other words, even with a thickness of 2.94 mGy for the SN 3(0.9 mm) of type 1, shielding can be achieved, with a patient dose lower than the diagnostic reference level(3.42 mGy). Additionally, among the three types of shielding material, the type 1 appeared to be the most appropriate shielding material. It is thought that the use of shielding material could reduce the risk factors for stochastic effects or critical effects of ionizing radiation during pelvic or lumbar radiography.

국내 의료기관에서 측방두부규격방사선촬영시 임상에서의 촬영조건 및 환자 선량 (Radiographic examination protocol and patient dose in lateral cephalometric radiography in Korea)

  • 최진우
    • Imaging Science in Dentistry
    • /
    • 제40권4호
    • /
    • pp.165-169
    • /
    • 2010
  • Purpose : To survey the radiographic examination protocol for lateral cephalometric radiographic examinations and to measure their patient doses in Korea and to compare the dose according to the size of hospital, the type of image receptor system, and the installation duration. Materials and Methods : The radiographic examination protocols (kVp, mA, and exposure time) for lateral cephalometric radiography were surveyed with 61 cephalometric radiographic equipments and their patient dose-area product (DAP) measured with a DAP meter (DIAMENTOR M4-KDK, PTW, Freiburg, Germany) for 51 cephalometric radiographic equipments. The radiographic examination protocols and patient doses were compared according to the size of hospital (university dental hospital, dental hospital, and dental clinic), the type of image receptor system (film-based, DR and CR type) and the installation duration, respectively. SPSS 12.0.1 for Windows (SPSS Inc., Chicago, USA) was used for independent t-test and ANOVA test. Results : The average protocols were 77.0 kVp, 12.7 mA, 6.2 second for cephalometric radiography. The average patient dose (DAP) was $128.0mGy\;cm^2$ and 3rd quartile dose (DAP) $161.1mGy\;cm^2$ for cephalometric radiography for adult male. There was no statistically significant difference at average patient DAP according to the size of hospital, the type of image receptor system, and the installation duration, repectively. Conclusion : The average patient dose was $128.0mGy\;cm^2$ and the third quartile patient dose $161.1mGy\;cm^2$ for lateral cephalometric radiography for adult male in Korea.

관상동맥조영술과 경피적관상동맥중재술에서 환자 선량과 암 발생 생애귀속위험 평가 (Radiation Dose and Estimate of Lifetime Attributable Risk of Cancer from Coronary Angiography and Percutaneous Coronary Intervention)

  • 강영한;김부순;박종삼
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제33권3호
    • /
    • pp.213-221
    • /
    • 2010
  • 관상동맥질환의 진단과 치료를 위한 관상동맥조영술(Coronary Angiography, CA)과 경피적관상동맥중재술(Percutaneous Coronary Intervention, PCI) 과정에서 환자에 대한 유효선량을 알아보고, 이 선량으로 인한 암 발생위험을 CA와 PCI를 구분하여 평가해 보고자 하였다. CA를 시행한 환자 60명과 PCI 시술을 받은 환자 58명을 대상으로 DAP(dose-area product)를 측정하였고, 몬테카를로 시뮬레이션(Monte Carlo simulations) 프로그램(PCXMC 1.5)을 이용하여 유효선량과 장기선량을 산출하였다. 암 발생의 생애귀속위험의 평가는 전리방사선 생물학적 효과 위원회의 7차 보고서(BEIR VII)를 활용하였다. 그 결과 대상자의 DAP 값 평균은 CA군에서 $53.76\;Gy{\cdot}cm^2$이었고, PCI군에서는 $165.82\;Gy{\cdot}cm^2$이었다. 유효선량은 CA군에서 평균 1.28 mSv이었고, PCI군에서는 3.94 mSv이었다. 장기선량은 폐에서 CA군 2.17 mSv, PCI군 6.71 mSv이었고, 여성 유방선량은 CA에서 5.45 mSv, PCI에서 16.82 mSv이었다. 암 발생 생애귀속위험은 CA에서 남성은 1,508명 중 1명, 여성은 1,357명 중 1명이었고, PCI에서는 남성 553 중 1명, 여성은 482명 중 1명이었다. DAP 값은 몬테 카를로 시뮬레이션을 기본으로 하여 장기선량과 유효선량을 계산할 수 있는 지표가 되었다. CA와 PCI 과정에서 환자에게 노출되는 방사선량은 무시할 수 없는 암 발생의 생애귀속위험이 된다. 또한 암 발생 위험은 PCI군에서 더 높았고, 남성보다는 여성이 더 높았다.

디지털 흉부단층합성검사에서 감도와 관전압 변화에 따른 영상 최적화 (Optimization of Image Quality according to Sensitivity and Tube Voltage in Chest Digital Tomosynthesis)

  • 김상현
    • 한국방사선학회논문지
    • /
    • 제12권4호
    • /
    • pp.541-547
    • /
    • 2018
  • 흉부 디지털 단층합성(chest digital tomosynthesis, CDT) 검사 시 관전압 및 감도(sensitivity) 변화에 의한 선량감소 효과와 정량적 평가로 선량 최적화 조건을 평가하고자 한다. 관전압 125 kV, 135 kV 설정에 따른 sensitivity 200, 320, 400 변화하여 팬텀의 CDT 영상을 획득하였다. 감도와 관전압 변화 따른 선량과 면적선량(DAP)을 평가하였다. 화질평가는 최대신호 대 잡음비(PSNR), 대조도 대 잡음비(CNR), 신호 대 잡음비(SNR)를 image J를 이용하여 분석하였다. 선량은 14~23%, 면적선량은 13~26% 정도 sensitivity 200, 125 kV에 비해 측정치가 낮아졌고, sensitivity 가 높아짐에 따라 감소율 커짐을 알 수 있었다. PSNR은 27dB 이상으로 모두 의미 있는 수치였고, CNR, SNR은 sensitivity가 낮을수록 우수했으나, 항목마다 통계의 유의성은 달랐다. CNR과 SNR 모두 sensitivity 320, 135 kV가 sensitivity 200, 125 kV와 통계적으로 유의하지 않았다(p>0.05). CDT는 감도, 관전압과 디지털 촬영의 장비의 장점인 보정능력을 이용하여 더 작은 선량으로 화질을 유지 시킬 수 있다.

Review of National Diagnostic Reference Levels for Interventional Procedures

  • Lee, Min Young;Kwon, Jae;Ryu, Gang Woo;Kim, Ki Hoon;Nam, Hyung Woo;Kim, Kwang Pyo
    • 한국의학물리학회지:의학물리
    • /
    • 제30권4호
    • /
    • pp.75-88
    • /
    • 2019
  • Diagnostic reference level (DRL) is employed to optimize the radiation doses of patients. The objective of this study is to review the DRLs for interventional procedures in Korea and abroad. Literature review was performed to investigate radiation dose index and measurement methodology commonly used in DRL determination. Dose area product (DAP) and fluoroscopy time within each major procedure category were systematically abstracted and analyzed. A wide variation was found in the radiation dose. The DAP values and fluoroscopy times ranged 0.01-3,081 Gy·㎠ and 2-16,878 seconds for all the interventional procedures, 8.5-1,679 Gy·㎠ and 32-5,775 seconds for the transcatheter arterial chemoembolization (TACE), and 0.1-686 Gy·㎠ and 16-6,636 seconds for the transfemoral cerebral angiography (TFCA), respectively. The DRL values of the DAP and fluoroscopy time were 238 Gy·㎠ and 1,224 seconds for the TACE and 189 Gy·㎠ and 686 seconds for the TFCA, respectively. Generally, the DRLs of Korea were lower than those of other developed countries, except for the percutaneous transluminal angioplasty with stent in arteries of the lower extremity (LE PTA and stent), aneurysm coil embolization, and Hickman insertion procedures. The wide variation in the radiation doses of the different procedures suggests that more attention must be paid to reduce unnecessary radiation exposure from medical imaging. Furthermore, periodic nationwide survey of medical radiation exposures is necessary to optimize the patient dose for radiation protection, which will ultimately contribute to patient dose reduction and radiological safety.

PCXMC 소프트웨어를 이용한 소아에서의 CBCT 환자선량 평가 (Dose estimation of cone-beam computed tomography in children using personal computer-based Monte Carlo software)

  • 김은경
    • 대한치과의사협회지
    • /
    • 제58권7호
    • /
    • pp.388-397
    • /
    • 2020
  • Objective: The purpose of the study was to calculate the effective and absorbed organ doses of cone-beam computed tomography (CBCT) in pediatric patient using personal computer-based Monte Carlo (PCXMC) software and to compare them with those measured using thermoluminescent dosimeters (TLDs) and anthropomorphic phantom. Materials and Methods: Alphard VEGA CBCT scanner was used for this study. A large field of view (FOV) (20.0 cm × 17.9 cm) was selected because it is a commonly used FOV for orthodontic analyses in pediatric patients. Ionization chamber of dose-area product (DAP) meter was located at the tube side of CBCT scanner. With the clinical exposure settings for a 10-year-old patient, DAP value was measured at the scout and main projection of CBCT. Effective and absorbed organ doses of CBCT at scout and main projection were calculated using PCXMC and PCXMCRotation software respectively. Effective dose and absorbed organ doses were compared with those obtained by TLDs and a 10-year-old child anthropomorphic phantom at the same exposure settings. Results: The effective dose of CBCT calculated by PCXMC software was 292.6 μSv, and that measured using TLD and anthropomorphic phantom was 292.5 μSv. The absorbed doses at the organs largely contributing to effective dose showed the small differences between two methods within the range from -18% to 20%. Conclusion: PCXMC software might be used as an alternative to the TLD measurement method for the effective and absorbed organ dose estimation in CBCT of large FOV in pediatric patients.

  • PDF

Conversion coefficients for the estimation of effective dose in cone-beam CT

  • Kim, Dong-Soo;Rashsuren, Oyuntugs;Kim, Eun-Kyung
    • Imaging Science in Dentistry
    • /
    • 제44권1호
    • /
    • pp.21-29
    • /
    • 2014
  • Purpose: To determine the conversion coefficients (CCs) from the dose-area product (DAP) value to effective dose in cone-beam CT. Materials and Methods: A CBCT scanner with four fields of view (FOV) was used. Using two exposure settings of the adult standard and low dose exposure, DAP values were measured with a DAP meter in C mode ($200mm{\times}179mm$), P mode ($154mm{\times}154mm$), I mode ($102mm{\times}102mm$), and D mode ($51mm{\times}51mm$). The effective doses were also investigated at each mode using an adult male head and neck phantom and thermoluminescent chips. Linear regressive analysis of the DAP and effective dose values was used to calculate the CCs for each CBCT examination. Results: For the C mode, the P mode at the maxilla, and the P mode at the mandible, the CCs were 0.049 ${\mu}Sv/mGycm^2$, 0.067 ${\mu}Sv/mGycm^2$, and 0.064 ${\mu}Sv/mGycm^2$, respectively. For the I mode, the CCs at the maxilla and mandible were 0.076 ${\mu}Sv/mGycm^2$ and 0.095 ${\mu}Sv/mGycm^2$, respectively. For the D mode at the maxillary incisors, molars, and mandibular molars, the CCs were 0.038 ${\mu}Sv/mGycm^2$, 0.041 ${\mu}Sv/mGycm^2$, and 0.146 ${\mu}Sv/mGycm^2$, respectively. Conclusion: The CCs in one CBCT device with fixed 80 kV ranged from 0.038 ${\mu}Sv/mGycm^2$ to 0.146 ${\mu}Sv/mGycm^2$ according to the imaging modes and irradiated region and were highest for the D mode at the mandibular molar.

Low-Dose Three-Dimensional Rotational Angiography for Evaluating Intracranial Aneurysms: Analysis of Image Quality and Radiation Dose

  • Hee Jong Ki;Bum-soo Kim;Jun-Ki Kim;Jai Ho Choi;Yong Sam Shin;Yangsean Choi;Na-Young Shin;Jinhee Jang;Kook-jin Ahn
    • Korean Journal of Radiology
    • /
    • 제23권2호
    • /
    • pp.256-263
    • /
    • 2022
  • Objective: This study aimed to evaluate the image quality and dose reduction of low-dose three-dimensional (3D) rotational angiography (RA) for evaluating intracranial aneurysms. Materials and Methods: We retrospectively evaluated the clinical data and 3D RA datasets obtained from 146 prospectively registered patients (male:female, 46:100; median age, 58 years; range, 19-81 years). The subjective image quality of 79 examinations obtained from a conventional method and 67 examinations obtained from a low-dose (5-seconds and 0.10-μGy/frame) method was assessed by two neurointerventionists using a 3-point scale for four evaluation criteria. The total image quality score was then obtained as the average of the four scores. The image quality scores were compared between the two methods using a noninferiority statistical testing, with a margin of -0.2 (i.e., score of low-dose group - score of conventional group). For the evaluation of dose reduction, dose-area product (DAP) and air kerma (AK) were analyzed and compared between the two groups. Results: The mean total image quality score ± standard deviation of the 3D RA was 2.97 ± 0.17 by reader 1 and 2.95 ± 0.20 by reader 2 for conventional group and 2.92 ± 0.30 and 2.95 ± 0.22, respectively, for low-dose group. The image quality of the 3D RA in the low-dose group was not inferior to that of the conventional group according to the total image quality score as well as individual scores for the four criteria in both readers. The mean DAP and AK per rotation were 5.87 Gy-cm2 and 0.56 Gy, respectively, in the conventional group, and 1.32 Gy-cm2 (p < 0.001) and 0.17 Gy (p < 0.001), respectively, in the low-dose group. Conclusion: Low-dose 3D RA was not inferior in image quality and reduced the radiation dose by 70%-77% compared to the conventional 3D RA in evaluating intracranial aneurysms.

인터벤션 시술 시 면적선량계를 이용한 환자 방사선 선량 평가 (Evaluation of Patient Radiation Doses Using DAP Meter in Interventional Radiology Procedures)

  • 강병삼;윤용수
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제40권1호
    • /
    • pp.27-34
    • /
    • 2017
  • 해외 각국에서 발표된 중재적 방사선 영역에서의 환자선량을 조사하였으며, 전국 23개 주요 병원에서 국내에서 많이 시행되는 13개의 주요 중재적 방사선 시술에 대한 환자선량을 DAP meter를 이용하여 측정하였으며, 시술별 피폭선량에 관한 8,415 건의 국내 자료를 확보하고, 각 주요 시술별로 참고 선량치를 제시하였다. 연구결과는 경동맥화학색전술 $237.7Gy{\cdot}cm^2$, 투석용 동정맥루 인터벤션시술 $17.3Gy{\cdot}cm^2$, 하지 혈관질환의 인터벤션시술 $114.1Gy{\cdot}cm^2$, 뇌혈관조영술 $188.5Gy{\cdot}cm^2$, 뇌동맥류 코일색전술 $383.5Gy{\cdot}cm^2$, 경피경간 담즙 배액술 $64.6Gy{\cdot}cm^2$, 담도 스텐트설치술 $64.6Gy{\cdot}cm^2$, 요로 폐색에 대한 신루설치술 $22.4Gy{\cdot}cm^2$, 다목적 중심정맥 카테터 삽입시술 $4.3Gy{\cdot}cm^2$, 항암제 주입 목적의 매몰형 중심정맥 카테터 삽입시술 $2.8Gy{\cdot}cm^2$, 혈액 투석 목적의 중심정맥 카테터 삽입시술 $4.4Gy{\cdot}cm^2$, 카테터를 이용한 배액시술 $17.1Gy{\cdot}cm^2$ 그리고 장기혈관색전술 $357.9Gy{\cdot}cm^2$이다. 본 연구를 통해 얻은 선량참고치는 방사선 인터벤션 시술에서 환자선량을 줄일 수 있는 최소한의 가이드라인으로 활용될 수 있을 것으로 생각되며, 참고선량치에 대한 연구는 장비의 발달과 시술방법, 재료의 발전으로 변화될 수 있음을 감안하고 선진국에서는 5년마다 시행되고 있음을 참고할 때, 향후 면적선량을 유효선량으로 변환할 수 있는 국내시술에 적합한 한국형 변환계수가 연구되어야 할 것으로 사료된다.

디지털 심혈관조영장치의 기하학적 특성에 따른 선량 감소 (Reduction of Radiation Dose according to Geometric Parameters from Digital Coronary Angiography)

  • 강영한;조평곤
    • 한국방사선학회논문지
    • /
    • 제7권4호
    • /
    • pp.277-284
    • /
    • 2013
  • 심혈관 촬영 시 선량감소를 위해 실무자가 조절 가능한 기하학적 특성을 살펴보고, 각 특성에 따른 유효선량을 비교해 보았다. 인체 모형 팬텀을 이용하여 투시촬영과 영화촬영을 시행하였고, 선량의 측정은 심혈관 장치의 DAP meter를 이용하여 DAP 값을 유효선량으로 환산하였다. 먼저 영화촬영은 투시촬영에 비해 기하학적 특성 전반에 걸쳐서 선량이 약 6-7배 높았다. FPS mode에 따른 선량은 FPS를 낮게 설정할수록 선량이 70%까지 감소하였다. 선관 각도에 따른 선량은 LAO $45^{\circ}$+Caudal $30^{\circ}$이 가장 높게 측정되었고, 조사야 조절장치를 많이 적용할수록 선량은 감소하였다. X-선관과 영상증배관의 거리가 10 cm 멀어질수록 투시촬영과 영화촬영에서 각각 선량이 25-35%까지 증가하였다. FOV가 확대될수록 선량이 1.21-2배 증가하였고, 테이블과 영상증배관 거리가 10cm 멀어질수록 선량은 1.11-1.25배 까지 증가하였다. 따라서 본 연구에서 실험한 기하학적 특성인 FPS mode, 선관 각도, 조준기, 선관과 영상증배관 거리, 테이블과과 영상증배관 거리, FOV 영상 확대 등은 중재적 시술 시 실무자가 수시로 조절 가능한 인자이며, 각 특성에 따라 선량 감소 효과를 기대할 수 있다.