• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.920-923
• /
• 2017

In this paper, we design the internal parameters of the SIMO channel sounder suitable for the measurement of the high-speed travel environment channel, and measure the characteristics of the wide-band channel by applying the proposed measurement method to the Yeoju Smart Highway piloted at 5.89 GHz C-ITS. Based on the design of the receiving array structure suitable for the real environment, the linear slope compensation method for the Doppler phase shift is applied to provide a reliable result on the Doppler effect due to the incoming angle information and the surrounding environment in the multipath environment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1197-1201
• /
• 2018

In this paper, a Doppler radar for a localization of a human motion is demonstrated. In the system, we used a $8{\times}8$ phased array antenna using metamaterial phase shifters for easy and precise control of antenna beam pattern. Scanning area is a circular sector with an inscribed angle of $60^{\circ}$ and a diameter of 45m. This area is divided with 15 designated area and each area is scanned for 0.2 second. When there is a motion in a designated area, we are able to detect a frequency shift due to a Doppler effect. In this way it is possible to detect the location of motion. The experiment shows that 78% of position accuracy. The remaining 22% occurred the surroundings of the designated area.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.799-807
• /
• 2014

In this paper, we design a rake-based cellular radar receiver (CRR) scheme to detect a moving target located in a multipath environment. The modules of Doppler filter banks, threshold level test, and target detection module are newly introduced into the conventional rake receiver so that it can function as a radar system. The proposed CRR tests the Doppler-shift frequency and signal-to-noise ratio of the received signal against predefined threshold levels to determine detection and then calculates target velocities and ranges. The system performance is evaluated in terms of detection probability and the maximum detection range under a Nakagami-n channel that reflects the multipath environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.199-206
• /
• 2013

In general, radial velocity of a target can be obtained by acquiring doppler frequency shift in case of a doppler radar, or can be obtained by acquiring range rate in case of a pulse radar. Then radial velocity can be converted to tangential velocity using aspect angle or position variation per unit time. These two ways have the same meaning in physically, but result in different uncertainty finally. In this paper, it is described not only the two transformation procedures to calculate tangential velocity from radar measurement data, but also the result of combined uncertainty comparison between these two procedures.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.487-490
• /
• 2004

OFDM(Orthogonal Frequency Division Multiplexing) 방식의 수중음향 데이터 통신시스템에서 도플러 편이(Doppler Shift)와 도플러 확산(Doppler Spread)의 영향을 완화하여 주파수 효율을 향상시킬 수 있는 수신신호처리 방안을 설계하고 해상에서 송수신 된 시험 데이터의 BER 로써 성능을 평가한다. 도플러 편이를 OFDM 심볼에 부가된 Cyclic Prefix 와 상관계수법을 통해 추정하였으며 도플러 확산에 의해 시간에 따라 변화하는 채널을 Time-Frequency 축상에서 $2\times1D$ MMSE 방식으로 추정한다. 해상실험 결과, $8kHz\~11kHz$ 의 전송대역을 사용 할 때 복호 전 전송률 3098bps, 송수신 소자간 거리 7km, SNR 15dB에서 약 $1\~3\%$의 BER이 추정된다.

• Journal of Biosystems Engineering
• /
• v.19 no.4
• /
• pp.301-310
• /
• 1994

The feasibility of using ultrasonic-wave doppler sensors for a measurement of the actual ground speed of agricultural machines was investigated. The actual ground speed is estimated from the doppler shift frequencies of the two ultrasonic-waves transmitted to and received from a moving object. A prototype of the speed-measurement system was designed and constructed for the performance test. The measurement system showed a good performance with a flat surface at speeds lower than 3m/s. However, it was failed to receive the reflected signals from the rough and irregular soil surfaces. Further researches to solve this problem and to improve its performance are now underway.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.81-88
• /
• 2013

This paper describes the fundamentals, design, realization and test results of a BPSK(Bi Phase Shift Keying) transceiver for the direction finding proximity fuze sensor for anti-aircrafts or air missiles. The BPSK transceiver for the direction finding fuze sensor has been designed to detect a moving target by Doppler signal processing with the code correlation method and to distinguish direction by comparing received powers of each Doppler signal from adjacent three receiving antennas. The electrical and ESS(Environmental Stress Screening) tests of the BPSK transceiver showed satisfactory results and target detection and direction finding performances proved to be successful through dynamic operation tests by 155 mm gun firing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.16-24
• /
• 2007

The high-frequency analysis method of back-scattering cross section spectrum of rotating targets is established. The time history of the back-scattering cross section is calculated using a quasi-stationary approach, based on a physical optics and a physical theory of diffraction, combining an adaptive triangular beam method to consider the shadow effect. And the spectra of back-scattering cross section by the Doppler effect are analyzed applying a simple fast Fourier transform method to its time history. The numerical calculation for rotating targets, such as rotating metal plates and underwater propeller, are carried out. The time history appears to be periodic with respect to the number of wings. The backscattering cross section spectrum level and its frequency shift are dependent on the rotating speed, direction, and the shape of the targets.

• Nuclear Engineering and Technology
• /
• v.35 no.4
• /
• pp.336-346
• /
• 2003

This study is intended to evaluate the dependency of TRU recycling characteristics on the neutron spectrum shift in a Pb-Bi cooled core. Considering two Pb-Bi cooled cores with the soft and the hard spectrum, respectively, various characteristics of the recycled core are carefully examined and compared with each other. Assuming very simplified fuel cycle management with the homogeneous and single region fuel loading, the burnup calculations are performed until the recycled core reached to the (quasi-) equilibrium state. The mechanism of TRU recycling toward the equilibrium is analyzed in terms of burnup reactivity and the isotopic compositions of TRU fuel. In the comparative analyses, the difference in the recycling behavior between the two cores is clarified. In addition, the basic safety characteristics of the recycled core are also discussed in terms of the Doppler coefficient, the coolant loss reactivity coefficient, and the effective delayed neutron fraction.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.373-383
• /
• 2012

The performance of underwater acoustic communication system is sensitive to the Doppler shift and ISI(Inter-Symbol Interference). Therefore, the simulation algorithm needs to consider time-spread due to multipath arrivals which cause the ISI, and time-varying Doppler shift along with moving source and receiver. For this purpose, VirTEX(Virtual Time series EXperiment) based on Ray model has been developed. In this paper, VirTEX is used to compare the characteristics of ocean waveguide from the experimental data and illustrate the performance. The CIR(Channel Impulse Response) that characterizes the multipath arrivals with representative time-spread due to multipath arrivals is compared between numerically simulated and experimental probe signal. Also, the communication performance analysis for BER(Bit Error Rate) is compared between numerically simulated and experimental data signal. As a result, VirTEX can be useful as a simulation tool for evaluating the performance of underwater acoustic communication system.