• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.700-702
• /
• 2016

나로우주센터에서는 우주발사체의 비행임무 초기구간 동안에 발사체의 거리 및 속도정보를 획득하기 위해서 광학추적장비에 거리측정 도플러 레이더를 탑재하여 운용하고 있다. 본 논문은 광학추적장비의 MFCW(Multi Frequency Continuous Wave)방식과 FMCW(Frequency Modulation Continuous Wave)방식 도플러 레이더 구성과 거리측정 방법을 기술하였다.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.815-821
• /
• 2012

CW 도플러 레이더는 움직이는 물체의 속도에 비례하는 도플러 주파수 편이를 검출함으로써 속도를 계측한다. 도플러 주파수 편이를 검출하기 위해서 시간영역에서 획득한 수신 신호를 주파수 영역으로 변환하기 위한 FFT(Fast Fourier Transform)를 수행한다. 이때 FFT 개수에 의해 도플러 레이더의 시각 분해능이 달라진다. 또한, FFT 개수는 수신 신호의 신호 대 잡음비에도 영향을 미치므로, 결국 시선 속도의 정확도와도 관련 있다. 따라서 본 논문에서는 FFT 개수에 따라 달라지는 시각 분해능과 시선 속도 정확도의 관계를 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제19권2호
• /
• pp.143-152
• /
• 1998

In this paper, we present the performances of a Doppler system using single channel RF(Radio Frequency) sampling. This technique consists of undersampling the ultrasonic blood backscattered RF signal on a single channel. Conventional undersampling method in Doppler imaging system have to use a minimum of two identical parallel demodulation channels to reconstruct the multigate analytic Doppler signal. However, this system suffers from hardware complexity and problem of unbalance(gain and phase) between the channels. In order to reduce these problems, we have realized a multigate pulsed Doppler system using undersampling on a single channel, It requires sampling frequency at $4f_o$(where $f_o$ is the center frequency of the transducer) and 12bits A/D converter. The proposed " single-Channel RF Sampling" method aims to decrease the required sampling frequency proportionally to $4f_o$/(2k+1). To show the influence of the factor k on the measurements, we have compared the velocity profiles obtained in vitro and in vivo for different intersequence delays time (k=0 to 10). We have used a 4MHz center frequency transducer and a Phantom Doppler system with a laminar stationary flow. The axial and volumetric velocity profiles in the vessel have been computed according to factor k and have been compared. The influence of the angle between the ultrasonic beam and the flow axis direction, and the fluid viscosity on the velocity profiles obtained for different values of k factor is presented. For experiment in vivo on the carotid, we have used a data acquisition system with a sampling frequency of 20MHz and a dynamic range of 12bits. We have compared the axial velocity profiles in systole and diastole phase obtained for single channel RF sampling factor.ng factor.

• 한국군사과학기술학회지
• /
• 제25권1호
• /
• pp.23-29
• /
• 2022

As the application field of radar is expanded and the bandwidth increases, the number of radar sensors operating at the same frequency is continuously increasing. In this paper, we propose a method of analyzing interference when two pulse doppler radars are operated at the same frequency with different waveform which are designed independently. In addition, we show that even for a previously designed LFM waveforms, the interference can be suppressed without affecting the performance by changing the sign of the frequency slope by increasing/decreasing, or by modulating the pulses by the different codes. The interference suppression by different slopes is more effective for similar waveform and the suppression by the codes increases as the number of pulses increases. We expect this result can be extended to the cases where multiple radars are operated at the same frequency.

• 한국음향학회지
• /
• 제9권3호
• /
• pp.48-55
• /
• 1990

2차 샘플링이 도플러 신호의 평균 주파수 측정에 미치는 영향에 대해서 분석을 하였다. 아나로그/디지탈 변환기(analogue-to-digital converter)의 샘플링 주파수를 낮추기 위해 수신 신호를 $4f_0$ 대신에 $4f_0$/5나 $4f_0$/9의 낮은 주파수로 샘플링에서 도플러 신호를 얻을 수 있다. ($f_0$는 송신 신호의 중심 주파수이다.) 일반적인 도플러 시스템에서처럼 수신 신호가 협 대역이면 낮은 샘플링 주파수로 인해 발생되는 평균 주파수의 측정에 대한 오차는 무시할 정도로 작다는 것을 컴퓨터 시뮬레이션과 실험을 통해 증명하였다.

• 대한원격탐사학회지
• /
• 제19권6호
• /
• pp.421-430
• /
• 2003

Radarsat-1 위성으로부터 수신된 신호자료를 처리하여 영상을 생성하기 위해서는 도플러 정보(도플러 중심주파수(f$_{dc}$) 및 주파수 변화율 (f$_{r}$)를 정확하게 추정하는 것이 중요하다. 일반적으로 이들 정보들은 신호자료를 기반으로 하는 clutterlock 및 auto-focusing 기법이 사용되고 있으나 이들은 수신 신호만을 사용하여 추정하므로 SAR 프로세서 개발시 구현하기가 어려우며 계산 시간도 많이 걸리는 단점이 있다. 본 논문에서는 주어진 위성의 궤도 및 자세정보를 최대한 이용하며 수신신호 처리는 최소한이 되도록 하여 구현이 쉽고 계산상 이점이 있는 새로운 기법을 제안하였다. 실제 Radarsat-1 신호자료를 이용한 실험적용 결과, 본 기법이 실제 SAR 신호자료로부터 도플러 정보를 추출하는데 유용하게 사용될 수 있을 것으로 판단된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.156-159
• /
• 2009

Speckle noise reduction for 3D power doppler ventricle coherent image for restoration and enhancement using wavelet packet transform with separated thresholding is presented. Wavelet Packet Transform divide into low frequency component image to high frequency component image to be multi-resolved. speckle noise is located on high frequency component in multiresolution image mainly. A ventricle image is transformed and inversed with separated threshold function from low to high resolved images for restoration to be utilize visualization for ventricle diagnosis. The experimental result shows that the proposed method has better performance in comparison with the conventional method.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1997년도 영남지회 학술발표회 논문집 Acoustic Society of Korean Youngnam Chapter Symposium Proceedings
• /
• pp.40-43
• /
• 1997

It is known tat the echoes from the most objects differ from the incident pulses in amplitude and frequency .Especially, the frequency in echoes from moving target is shiftby the Doppler effect. it causes to reduce the receiving sensitivity of piezoelectric transducers that have definite band width. The electric impedance, whichis connected to the electrical terminals, notably changes the resonant frequency of a thickeness mode piezoelectric vibrator with high electromechanical doupling due to the electroelastic effect. Using this effect, we have developed a frequency controllable ultrasonic transducer which is mad eof multi-layered PZT disks to adjust to frequency shifted by Doppler effect. The characteristics of transducer can be obtained by using the equivalent circuit of transmission line model. It was confirmed experimentally that the center frequency and band width of the trasducer could be controlled by the conditions of the electrical terminals. These results coincided with theoretical results.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.484-486
• /
• 2018

나로우주센터에서는 우주발사체 및 경비행기의 사거리(slant range)를 측정하기 위해서 전자광학추적 장비에 MFCW (Multi Frequency Continuous Wave) 거리측정 도플러 레이다를 탑재하여 운용하였다. 본 논문에서는 레이저광파 거리측정장비에서 정확히 측정된 사거리 측정값과 도플러 레이다의 트랜스폰더를 사용하여 측정된 사거리 측정값 차이를 비교분석하고 사거리 정확도를 기술하였다.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.289-294
• /
• 2006

Better fundamental understanding of the interactions between the in-cylinder flows and combustion process is an important requirement for further improvement in the fuel economy and emissions of internal combustion(IC) engines. Flow near a spark plug at the time of ignition plays an important role for early flame kernel development(EFKD). Velocity data measurements in this study were made with a two-component laser Doppler velocimetry(LDV) near a spark plug in a single cylinder optical spark ignition(SI) engine with a heart-shaped combustion chamber. LDV velocity data were collected on an individual cycle basis under wide-open motored conditions with an engine speed of 1,000rpm. This study examines and compares the flow fields as interpreted through ensemble, cyclic and discrete wavelet transformation(DWT) analysis. The energy distributions in the non-stationary engine flows are also investigated over crank angle phase and frequency through continuous wavelet transformation(CWT) for a position near a spark plug. Wavelet analysis is appropriate for analyzing the flow fields in engines because it gives information about the transient events in a time and frequency plane. The results of CWT analysis are provided and compared with the mean flows of DWT first decomposition level for all cycles at a position. Low frequency high energy found with CWT corresponds well with the peak locations of the mean velocity. The high frequency flows caused by the intake jet gradually decay as the piston approaches the bottom dead center(BDC).