• 전기학회논문지
• /
• 제63권2호
• /
• pp.325-330
• /
• 2014

In order to operate trains both mainline railroad platform and metropolitan subway line platform, it is necessary to develop the door step equipment of the rolling stock regardless of low(500mm, mainline) and high level platforms(1,135mm, metropolitan subway line) because of the requisite door safety system. In this study, TMS-DCU interface is studied for low and high level railway platforms. As a result, Design circuit of TMS(Train Management System)-DCU(Door Control Unit) interface is suitable for telescopic sliding type doorstep unit to minimize damage to the carbody underframe of railway vehicles.

• 대한영양사협회학술지
• /
• 제12권3호
• /
• pp.264-276
• /
• 2006

The purpose of this study was to propose HACCP system implementation properly and to secure the food safety of school foodservices in Pohang city since the proper facilities and equipment should be key factors in food safety and production. So this study was designed to evaluate existing equipment in food production area, receiving and dining area, and employee facilities. Questionnaire was mailed to 107 school foodservice dietitians in Pohang area and 97 were responded (90.7% response rate). Approximately sixty percent of foodservices were not available separate receiving or polluted area, fifty one percent were installed screen door for insecticidal and temperature and humidity control, and these environmental conditions were hard to keep kitchen dry and sanitary condition. Usually public schools were better equipped than private schools. Forty three percent of school foodservice had initial use of non-foodservice, opened before 1994, and thirty three percent of elementary school foodservice. Among employee facilities, hand washing sanitation stand was prepared seventy nine percent (78.9%) of school foodservices. Dietitians chose outworn equipment and facilities (30.9%), difficulties of maintaining standard temperature and humidity for foodservice (20.6%), lacking separate receiving or polluted area (13.4%), indirect contamination of water hoss (10.3%), and lacking employee facilities (10.3%) as critical points to correct in school foodservice. Therefore governmental regulating agencies must review and approval of plans prior to new construction or extensive remodeling of school foodservice facilities. In addition to these requirement, plan must be set-up step by step to implement HACCP system properly.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1107-1112
• /
• 2002

An easy elevator originated is an opened system to compare an existing equipment, and learning efficient is high as a wiring that the sequence control circuit is on and off. The structure of an equipment to be controled from the first floor to the fifth floor is constructed by a lamp to express the function of the open-close of the door according to the cage moving, to express the mechanical actuation of the forward-reverse break and motor of load and of hand-worked control component of Push-Button S/W, L/S and Relay. In order to act of the elevator function that these components connected, designed the auto program and the sequence control circuit. Consequently the process that these(1~5steps) operated the cage with an auto program of the elevator and the sequence control circuit is controled by the step of forward and reverse that the L/S1~L/S5 of sensor adjust function let posit, by the adjustable S/W1~S/W5 of PLC testing panel and the S/W1~S/W5 which installed on the transparent acryl plate of a frame. In here, improved apparatus is the learning equipment of combined use to study the principle and the technique of the originated sequence control circuit and the auto program of PLC.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.351-357
• /
• 2003

An easy learning elevator originated is opened to compare the existed teaming equipment, and it had a high studied efficiency that the sequence control circuit can open and close with the wire. The structure of equipment to be controlled from the first floor to the fifth floors is demostrated by the constructive apparatus with the lamps to express the function of the open-close of the door according to the cage moving with a mechanical actuation of the forward reverse breaker and the motor of load, and the mechanical actuation of hand-operation control components of push-button S/W and L/S and relay etc. These components let connect each other in order to control of the elevator function with the auto program and the designed sequence control circuit. Consequently the cage could go and come till 1∼5 steps with an auto program of the elevator and the sequence control circuit. The sequence control circuit is controlled by the step of forward and reverse to follow as that the sensor function of L/S1 ∼ L/S5 let posit with the control switchs of S/W1 ∼ S/W5 of PLC testing panel and switchs of S/W1 ∼ S/W5 installed on the transparent acryl plate of the frame. In here, improved apparatus is the hand-auto operation combined learning equipment to study the principle and technique of the originate sequence control circuit and the auto program of PLC.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1962-1969
• /
• 2008

According to the increase of power demand and expansion of downtown, it is necessary to install transformers additionally in operating substations and construct substations in residential area. But the public complaint is increased due to the transformer noise of the substation. KEPCO has used a vibration preventing pad, various soundproof walls and an encloser to transformers in outdoor substations, and a soundproof door, shutter and wind-path soundproof equipment in indoor substations to block the sound propagation of the transformers. But these noise reduction methods are not satisfied. It should be considered to reduce transformer noise itself. In this paper, we investigated core noise reduction techniques to develope a low noise transformer. The techniques to reduce core noise of the transformer are application of high permeability grain oriented silicon sheets, decrease of magnetic flux density of core, application of 6step-lap core stacking method, improvement of core binding method(binding addition, band fixing) and application of rubber damper in oder to reduce transmission of core vibration, etc.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.596-602
• /
• 2002

An easy elevator for learning originated is opened to compare the existed learning equipment, and it had a high studying efficient that the sequence control circuit can opens and closes with the wire. The structure of equipment to be controlled from the first floor to the fifth floors is demonstrated a constructive apparatus by a lamp atc to express the function of the open-close of the door according to the cage moving with a mechanical actuation of the forward-reverse breaker and the motor of load and a mechanical actuation of hand-operation control components of push-button S/W and L/S and relay etc. These components let connects each other in order to control of the elevator function with the auto program and the designed sequence control circuit. Consequent1y the process of these functions of 1~5steps could operates the cage with an auto program of the elevator and the sequence control circuit. The sequence control circuit is controlled by the step of forward and reverse to follow as that the sensor function of the L/S1~L/S5 let posit with the control switchs of S/W1~S/W5 of PLC testing panel and switchs of S/W1~S/W5 installed on the transparent acryl plate of the frame. In here, improved apparatus is a hand-auto operation combined learning equipment to study the principle and a technique of the originated sequence control circuit and the auto program of PLC.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.701-705
• /
• 2002

본 논문에서는 6TALK (IPv6 TrAansLator of Krv6) 프로젝트의 구현에 대한 내용과, 이를 이용하여 IPv6 망이 기존의 IPv4망이나, 다른 IPv6망과 자연스럽게 연동할 수 있는 시나리오에 관해 기술한다. 이미 잘 알려진 바와 같이 현재의 IPv4 인터넷은 인터넷 사용자의 폭발적인 급증과 더불어 한계를 맞이하고 있다. 이를 극복하기 위해 제안된 IPv6는 현재 여러 기술적인 표준화와 실험 망에서의 테스트 과정을 마무리 짓고 있는 단계이다. 앞으로의 IPv6의 보급에 있어 가장 중요한 과정은 기존에 널리 존재하고 있는 IPv4망과 자연스럽게 공존하며 그 적용 범위를 넓혀갈 수 있도록 하는 전이 기술을 개발, 보급하는 일이다 이를 위해서 IETF에서는 NGTrans라는 WG을 별도로 만들어 IPv6로의 전환에 관련된 기술들을 표준화하고 있다. 현재 전 세계적으로 다양한 IPv6 관련 전환기술 프로젝트들이 진행되고 있으며, 본 논문에서 소개하는 6TALK 프로젝트도 NGTrans WG에서 소개하는 기술들을 바탕으로 망의 구성에 따라 IPv4망과 IPv6망이 자연스럽게 공존할 수 있도록 하는 솔루션들을 제공하는 것을 최종 목표로 하는 프로젝트이다. NGTrans WG에서 제안한 전환기술은 듀얼스택, 터널링, 변환기 등과 같은 기본 기술들과, 이 기본 기술을 확장 응용한 기술들로 이루어져 있다. 6TALK는 이러한 전환기술들을 복합적으로 사용하며, 네트워크의 가장자리(edge)에 존재하는 IPv6망이 기존 IPv4망이나, IPv4 망을 사이에 두고 존재하는 IPv6망과 연동할 수 있도록 하는 기능을 제공한다. 6TALK은 전이기술로 NAT-PT/SIIT와 몇몇 응용레벨 프로토콜에 대한 ALG, 구현환경으로는 커널 2.4.18버전이 탑재된 리눅스를 이용하고 있다.d it apply a electronic cash system. In particularly a proposed electronic cash system have an anonymity control ability which trace a user who make use a electronic cash illegally in association with a trusted center.estigation and explain how our tool can be further enhanced.door playground facilities. On the basis of the site investigation the interview and the indoor education program for physically challenged children the author completed an outside play program. Each item in this program was classified as belonging to either a "sense play" program or and "exercise play" program. Finally, the author designed suitable play equipment for physically challenged children corresponding to each item in the exercise programs in order to research the appropriateness of the equipment to its intended use. This research is the first step. From this point the author expects that sp