• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.72-75
• /
• 2005

Recently, as the global warming by fossil fuels become social issues. the interest of renewable energy producing system is increasing rapidly. Among these, wind turbines are most highlighted because of its economic competitiveness. The tower occupying about $20\%$ of overall turbine costs, is one of the main components of wind turbine. Tower access door located to base part of the tower, is used to enter the tower. This is the main structural weak point because of door hole, weldment, etc. In this study, by FEM, we retrieved the maximum van Mises stress at door location and carried out fatigue analysis using stresses at weld toe locations of tower access door part.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.8-14
• /
• 2020

Recently, there was an increasing demand for an integrated access control system which is capable of user recognition, door control, and facility operations control for smart buildings automation. The market available door lock access control solutions need to be improved from the current level security of door locks operations where security is compromised when a password or digital keys are exposed to the strangers. At present, the access control system solution providers focusing on developing an automatic access control system using (RF) based technologies like bluetooth, WiFi, etc. All the existing automatic door access control technologies required an additional hardware interface and always vulnerable security threads. This paper proposes the user identification and authentication solution for automatic door lock control operations using camera based visible light communication (VLC) technology. This proposed approach use the cameras installed in building facility, user smart devices and IoT open source controller based LED light sensors installed in buildings infrastructure. The building facility installed IoT LED light sensors transmit the authorized user and facility information color grid code and the smart device camera decode the user informations and verify with stored user information then indicate the authentication status to the user and send authentication acknowledgement to facility door lock integrated camera to control the door lock operations. The camera based VLC receiver uses the artificial intelligence (AI) methods to decode VLC data to improve the VLC performance. This paper implements the testbed model using IoT open-source based LED light sensor with CCTV camera and user smartphone devices. The experiment results are verified with custom made convolutional neural network (CNN) based AI techniques for VLC deciding method on smart devices and PC based CCTV monitoring solutions. The archived experiment results confirm that proposed door access control solution is effective and robust for automatic door access control.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.66-71
• /
• 2013

The purpose of this study is to assess the criteria on a floor hinge and door closer for the optimum design of the access door of a smoke control room. The door opening force due to differential pressure is 60.75 N, 40.5 N, 32.91 N and 12.66 N when the differential pressure is 60 Pa, 40 Pa, 32.5 Pa and 12.5 Pa, respectively. The door opening force of the floor hinge and door closer to which the criteria of KS F 2806 are applied is 27.5 N, 40 N, 75 N, 100 N and 125 N for the Nos. 1, 2, 3, 4 and 5 class floor hinges and door closers, respectively. This study compared the differential pressure and opening force limits of floor hinges and door closers with the values specified in NFSC 501A and found that they exceeded the criteria specified in NFSC 501A. Therefore, it is necessary to reflect the differential pressure and smoke control wind speeds as well as the opening forces specified in NFSC 501A on the design of floor hinges and door closers. The installation conditions of floor hinges and door closers of access doors differ depending on the type and name of a smoke control damper. This study found that Nos. 1, 2 and 3 floor hinges and door closers could be installed for access doors with low differential pressure and that Nos. 1 and 2 floor hinges and door closers could be installed for access doors with normal differential pressure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.63-65
• /
• 2016

In this paper, smart door-lock system to access public facilities will be proposed. An existed door-lock system using physical door-lock, NFC Tag, and RFID could be replaced by our proposed system. Automatic access control management system with security authentication module enables the worker to access public facilities efficiently.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.468-473
• /
• 2016

The aim of this study was to measure the opening force of an access door of a pressurized smoke control zone and verify the reliability of the opening force. For the access door opening force, the opening load of the access door was measured before and after pressurized air had entered the smoke control zone. The reliability of the measured values was verified using the Anderson Darling's statistical analysis method of the Minitab Program. Because the analyzed P values were greater than 0.05 except for some floors before and after the operation of the smoke control equipment, the opening force was found to have 95% reliability. The normal distribution of the measured values showed no relationship with the operation of the smoke control equipment and the precision of the force gauge was believed to be reliable. The major factors for the optimal design of the pressurized smoke control equipment include the precision and reliability of the force gauge, the correct posture of the measuring person, and the same conditions for access doors. Therefore, a digital force gauge is believed to be suitable for measuring the opening force of the access door of a pressurized smoke control zone. In addition, standardization of the posture of a measuring person, the setup of the initial opening force of an access door, etc., are major variables for effective measurements of the door opening force of an access door.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.72-76
• /
• 2023

The mobile card system used for mobile access control is connected to the door lock mounted on the door, enabling non-contact control. The RSSI (Received Signal Strength Indicator) of the BLE (Bluetooth Low Energy) communication packet used here can help to know the direction and distance of the mobile device. In this study, the desirable access control distance was calculated and implemented by setting the RSSI of the transmitter of the BLE packet used in mobile access control and processing the RSSI of the receiver.

• Journal of Korea Multimedia Society
• /
• v.25 no.10
• /
• pp.1416-1432
• /
• 2022

The access control system is a system that allows users to selectively enter the building by granting an access key to the user for security. Access keys with weak security are easily exposed to attackers and cannot properly perform the role that authenticates users. Access code keys should be protected from forgery or spoofing. For this reason, access key verification service models is important in security. However, most models manage all access keys on one central server. This method not only interrupts all services due to server errors, but also risks forgery and spoofing in the process of transmitting access keys. Therefore, blockchain algorithms are used to reduce this risk. This paper proposes a blockchain-based access key verification service model that used distributed stored blockchain gateways on storing access keys and authenticates the user's identity based on them. To evaluate the performance of this model, an experiment was conducted to confirm the performance of the access key forgery recovery rate and the blockchain network performance. As a result, the proposed method is 100% forgery recovery rate, and the registration and verification process is evaluated at 387.58 TPS and 136.66 TPS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.261-263
• /
• 2017

Future science fiction science film science fiction film can easily see the appearance of the futuristic inquiry. Even if a person does not open the door by force, the door is opened and closed by the system. Even now, such a door can be found easily. However, in the past, people who have not been able to perceive people have been used only in public places such as department stores and marts, where there are many people who are inundated. However, a lot of researches are being done now, and we are pursuing convenience in everyday life by integrating the image processing technology that has been developed and developed many times, by implementing the automatic door which is not infringed by the personal life and is impossible for anyone to access.

• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.66-71
• /
• 2016

Smart building gate security control system using smartphone integrated with near field communication (NFC) has become part of daily life usage these days. The technology change in replacing RF NFC device using visible light communication technology based approach growing faster in recent days. This paper propose a design and development of gate security control system using color code based user authentication ID generation as part of an intelligent access control system to control automatic door open and close. In this approach gate security access control use the recent visible light communication technology trends to transfer the user specific authentication code to door access control system using color code on smartphone screen. Using a camera in the door access control system (ACS), color codes on smartphone screens are detected and matched to the database of authenticated user to open the door automatically in gate security system. We measure the visual light communication technology efficiency as a part of the research and the experiments have revealed that more than 95% users authenticated correctly at the suggested experiment environment on gate security control system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.539-544
• /
• 2020

The research is on progressing to operate digital door lock with the method to guarantee the security and safety in the meantime to use digital door lock conveniently using Internet of Things (IoT) standardizing various service providing technology using IoT in home network currently. In this study, compose home network interconnecting Raspberry-PI and web server reflection this trend and composed the system to control the door lock after connect Arduino substituting converter function. Making Raspberry-PI using dynamic IP address using existing open source easily maintain DNS information and possible to connect internet network in home network ethernet and finally, making the smartphone can control door lock remotely entering designated address after connect the internet. The connection between home network and Arduino is executed by Raspberry-PI and bluetooth pairing as 1:1 and make random user's access to be impossible. Especially, to make open/close the door lock with smartphone not by using password on the keypad or using RFID card is judged as the method increasing the security make random user's access to be impossible and also increased the usefulness making remote control to be possible.