• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3399-3404
• /
• 2013

A new accepter unit, pyrrolo[3,2-b]pyrrole-2,5-dione, was prepared and utilized for the synthesis of the conjugated polymers containing electron donor-acceptor pair for OPVs. Pyrrolo[3,2-b]pyrrole-2,5-dione unit, regioisomer of the known pyrrolo[3,4-c]pyrrole-1,4-dione, is originated from the structure of stable synthetic pigment. The new conjugated polymers with 1,4-diphenylpyrrolo[3,2-b]pyrrole-2,5-dione, thiophene and carbazole were synthesized using Suzuki polymerization to generate P1 and P2. The solid films of P1 and P2 show absorption bands with maximum peaks at about 377, 554 and 374, 542 nm and the absorption onsets at 670 and 674 nm, corresponding to band gaps of 1.85 and 1.84 eV, respectively. To improve the hole mobility of the polymer with 1,4-bis(4-butylphenyl)-pyrrolo[3,2-b]-pyrrole-2,5-dione unit, which was previously reported by us, the butyl group at the 4-positions of the N-substituted phenyl group was substituted with hydrogen and methyl group. The field-effect hole mobility of P2 is $9.6{\times}10^{-5}cm^2/Vs$. The device with $P2:PC_{71}BM$ (1:2) showed $V_{OC}$ value of 0.84 V, $J_{SC}$ value of 5.10 $mA/cm^2$, and FF of 0.33, giving PCE of 1.42%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.143-150
• /
• 2023

Underwater wireless communication is a challenging issue for realizing the smart aqua-farm and various marine activities for exploring the ocean and environmental monitoring. In comparison to acoustic and radio frequency technologies, the visible light communication is the most promising method to transmit data with a higher speed in complex underwater environments. To send data at a speedier rate, high-performance photodetectors are essentially required to receive blue and/or cyan-blue light that are transmitted from the light sources in a light-fidelity (Li-Fi) system. Here, we fabricated high-performance organic phototransistors (OPTs) based on P-type donor polymer (PTO2) and N-type acceptor small molecule (IT-4F) blend semiconductors. Bulk-heterojunction (BHJ) PTO2:IT-4F photo-active layer has a broad absorption spectrum in the range of 450~550 nm wavelength. Solution-processed OPTs showed a high photo-responsivity >1,000 mA/W, a large photo-sensitivity >10³, a fast response time, and reproducible light-On/Off switching characteristics even under a weak incident light. BHJ organic semiconductors absorbed photons and generated excitons, and efficiently dissociated to electron and hole carriers at the donor-acceptor interface. Printed and flexible OPTs can be widely used as Li-Fi receivers and image sensors for underwater communication and underwater internet of things (UIoTs).

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.1
• /
• pp.27-32
• /
• 2011

In this study, we have investigated the power conversion efficiency of organic solar cells utilizing conjugated polymer/fullerene bulk-hetero junction(BHJ) device structures. We have fabricated poly(3-hexylthiophene)(P3HT), poly[2methoxy-5-(3',7'-dimethyloctyl-oxy)-1-4-phenylenevinylene] as an electron donor, [6,6]-phenyl $C_{61}$ butyric acid methylester(PCBM-$C_{61}$)as an electron acceptor, and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS) used as a hole injection layer(HIL), after fabricated active layer, between active layer and metal cathode(Al) deposited LiF interlayer(5 nm). The properties of fabricated organic solar cell(OSC) devices have been analyzed as a function of different thickness. The electrical characteristics of the fabricated devices were investigated by means J-V, fill factor(FF) and power conversion efficiency(PCE). We observed the highest PCEs of 0.628%(MDMO-PPV:PCBM-$C_{61}$) and 2.3%(P3HT:PCBM-$C_{61}$) with LiF inter-layer at the highest thick active layer, which is 1.3times better than the device without LiF inter-layer.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.1
• /
• pp.46-52
• /
• 2002

As a functional additive for intestinal microflora, panose ($6^2-{\alpha}$-D-glucopyranosylmaltose) was synthesized during kimchi fermentation using the glucose transferring reaction of glucansucrase from Leuconostoc mesenteroides. For the glucose transferring reaction, sucrose and maltose were added ($2\%$ each, w/v) to dongchimi-kimchi as the glucosyl donor and acceptor molecule, respectively. After five days of incubation at $10^{\circ}C$, referring to the initial phase for the production of lactic acid in kimchi, over $60\%$ (w/v) of the total sugars were converted into panose and other branched oligosaccharides. Thereafter, the kimchi was stored at $4^{\circ}C$ and the amount of panose remained at a constant level for three weeks, thereby indicating the stability of panose to microbial degradation during the period of kimchi consumption. The use of maltose as the acceptor molecule in the kimchi also facilitated a lower viscosity in the kimchi-juice by preventing the synthesis of a dextran-like polymer which caused an unfavorable taste. Accordingly, the application of this new method of simultaneous biocatalytic synthesis of oligosaccharides during lactate fermentation should facilitate the extensive development of new function-added lactate foods.

• Membrane Journal
• /
• v.3 no.3
• /
• pp.136-139
• /
• 1993

It is well known that the membrane permeation in pervaporation is governed by both the chemical nature of the membrane material and the physical structure of the membrane and also the separation can be achieved by differences in either solubility, size or shape. The solubility of the penerrant in the polymeric membrane can be described qualitively by applying the Hildebrand relation [1] which relates the energy of mixing of the penerrant and the polymer material. Froehling et al. have tried to predict the swelling behavior of polymers for the systems of polyvinylchloride(PVC)-toluene-methanol, PVC-trichloroethylene-nitromethane and PVC-n-butylacetate-nitromethane[2]. The former two systems which do not show the donor/acceptor interactions upon mixing showed the successful results[2]. In addition to this technique, there are several other possible approaches to predict the swelling behaviors of polymers, such as the surface thermodynamic approach[3, 4], the comparison of the membrane polarity with the solvent polarity in terms of Dimroth's solvent polarity value[5].

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.286-290
• /
• 2002

The FT-Raman spectra of trans-polyacetylene films doped lightly with iodine were obtained with the 1320-nm laser line. The observed Raman bands are attributed to positively charged domains created by acceptor doping. The observed Raman wavenumbers of the V$_2$, (CC stretch), V$_3$, and V$_4$ bands (mixed of CC stretch and CH in-plan bending) of iodine-doped form are slightly higher than those of the corresponding bands of pristine trans-polyacetylene, whereas the contrary is the case for V$_1$, and (C=C stretch) of iodine-doped form. In particular, these upshifts of the V$_2$ and V$_3$ bands are distinguished from the downshifts of these bands in donor doping. The origin of doping induced Raman bands is discussed in terms of solitons and polarons.

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1242-1247
• /
• 1996

Spatially fixed bichromophoric systems with nonidentical chromophores have been extensively employed for studies of electron transfer and excitation transfer. Excitation hopping behavior between two naphthy1 moieties on 7,14-dihydro-7,14-ethanodibenz[a,h] anthracene(DEA)has been explored by the time-resolved fluorescence anisotropy measurements. The experimentally obtained value of the hopping rate in DEA agrees at least qualitatively with that calculated on the basis of the Dexter's theory, but disagrees with that calculated on the basis of the Forster's theory, indicates that for a pair of donor and acceptor with inter-chromophore separation as short as 4.5 $\AA$, excitation transfer via electron exchange is a predominant process.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.486-492
• /
• 2005

Into a no-conjugated polymer chain we have introduced side chains with a styrene-linked triphenylamine segment as a $\pi-electron$ donor, styrene-]inked aminobenzaldehyde segment as a tunable reactive -CHO group, and PM (4-(dicyanomethylene)-2-(tert-butyl)-4H-pyran) moiety as a $\pi-electron$ acceptor for red emitting materials. The thermal stability and the optical properties of the statistical copolymers have been studied. All the polymers were electrochemically active and showed electroluminescent emission at around 700nm. The EL device of P5-PM based on the sturcture of $ITO/PPV/polymer/BCP/Alq_3/Al$ showed a maximum brightness of $120cd/m^2\;at\;50mA/cm^2$ with an external quantum efficiency of $0.67\%$. It was possible to enhance the external quantum efficiency by balancing the charge recombination. A red-emitting polymer with high external quantum efficiency was developed by incorporating bifunctionality.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.376-380
• /
• 2010

Donor-$\pi$-acceptor (D-$\pi$-A) type chromophore-based polymers were newly synthesized. These polymers exhibited absorption peak due to intramolecular charge transfer (ICT) in a visible range as well as absorption peak due to carbonyl group in both solution and film state by measuring UV visible spectra. The addition of $Eu^{3+}$ ion into the polymers induced red-shift in absorption due to ICT and the color changes from yellow to red in the solution and film were observed by naked eyes. The contents of crosslinking agent influenced the features and solubility of the polymers. In addition, the contents of crosslinking agent and the $Eu^{3+}$ ion addition improved film-forming ability.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.694-701
• /
• 2013

A new copolymer named T-TI24T (poly((5,5-(2-butyl-5,6-bisdecyloxy-4,7-di-thiophen-2-yl-isoindole-1,3-dione))- alt-(2,5-thiophene))) based on phthalimide derivative and thiophene is synthesized by the Stille-coupling reaction. The polymer shows relatively high number average molecular weight of 86500 g/mol with good solubility in common organic solvents such as chloroform, 1,2-dichlorobenzene, and toluene and is thermally stable up to $380^{\circ}C$. Besides, it possesses a relatively low highest occupied molecular orbital (HOMO) energy level of -5.33 eV, promising the high open circuit voltage ($V_{oc}$) for photovoltaic applications. Active layer solution of polymer T-TI24T-as a donor and (6)-1-(3-(methoxycarbonyl)- {5}-1-phenyl[5,6]-fullerene (PCBM)-as an acceptor in different weight ratios is applied to fabricate the polymer solar cell devices. The ratio of polymer/PCBM affects the solar cell efficiency and the best performance exhibits in the device with polymer/PCBM = 1:3 (w/w), which shows a power conversion efficiency (PCE) of 0.199% and a $V_{oc}$ of 0.99 V, respectively. Even though the device shows the very low PCE, the $V_{oc}$ is higher than that of well known bulk heterojunction type solar cell based on P3HT:PC61BM (c.a. 0.5 V).