• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.393-398
• /
• 2004

From the research which it sees the noise of the high-speed railroad use nation it gave and the vehicle sound arresting tile masturbation which is a sound arresting unit standard it slept and in an environment noise standard side from it classified. The case foreign nation vehicle of the KTX vehicle where vehicle sound arresting from the side the high speed railroad use nations from the open ground with 64-68 dBA are used first of all from domestic and it compares and the efficiency almost is a possibility of knowing the beginning of history box from the interior sound arresting side. Also it will be developed from domestic and to case of the position KHST vehicle the speed 50 km/h is more speed up the KTX vehicle than in spite of the standard which is equal will pay with 350 km/h and it will be having and the possibility the strong point is knowing very from the interior sound arresting side it was. For railroad area along resident at the comfort improvement of the second the environment noise standard which it presents from the nation of most the patronage standard inland conforms in the law standard and the case high speed railroad of the place comparing domestic which is presented is not in spite of still prepared 2004 April commerce is operated standard easily not to be, it appeared with the fact that the speed governing one standard establishment by law is necessary.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.150-156
• /
• 2000

The purpose of this paper is to evaluate the noise level and the noise source for domestic trains. We measured and analyzed the interior noise, the rolling noise and the engine noise at Honam line(Seodaejeon-Jangseong) for passenger and power cars. The noise level is below 69㏈A for Seamaeul PMC(Powered Motor Car) coachs, below 65㏈A for Seamaeul and Mukungwha coachs, over 80㏈A for the driver's room of PMC and diesel-electric locomotives.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.324-329
• /
• 1997

This paper introduces experimental results of ride values assessed for domestic and overseas passenger cars. The experiment was executed about four vehicles, three Korean persons, and two roads by measuring human 12-axis. The results include the comparison of the component ride values, overall ride value, and seat effective amplitude transmissibility. The relative comparison of the ride values for different cars is shown in this paper, which may lead us to judge the current address of Korean ride quality-related technology.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.189-192
• /
• 1998

For the practical using the SRM by domestic application, we must of all have solution to the noise and the vibration. This paper presents the acoustic noise emitted from the SRM. The emitted noise it particularly strong when the frequency of deformation coincides with that of a natural mechanical resonance of the stator. To reduce the emit acoustical noise varying the switching frequency randomly. We will consist of SRM control system by using DSP, and confirm the effects of the noise reduction

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.3
• /
• pp.265-278
• /
• 2015

Objective:To study the sources of indoor noise, its effects on human health, noise assessment and regulation through the use of standards, and techniques used to reduce noise. Background: Noise significantly affects the living environment, and there are an increasing number of reports of its impacts on human health. Method: We reviewed domestic and foreign data regarding environmental noise, and examined its effects and the standards used to regulate noise levels. Results: We describe the major sources of indoor noise and suggest possible legal standards, as well as recommended criteria for the control of noise. Conclusion: South Korea has higher legal standards of environmental noise than international standards in terms of threshold values. People in Korea are exposed to various sources of noise, and therefore the reduction of noise is urgently required. Application: Depending on the features of indoor spaces, an appropriate degree of indoor noise can be determined and techniques to reduce excess noise are required.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.8 s.113
• /
• pp.806-813
• /
• 2006

An important factor of vibration test using MAST(multi axial simulation table) system is the reliance of input excitation source. Generally the generation of input excitation source is obtained by the measured data on special road in proving ground. The measured data on special road have more exciting energy than the data of real fields, therefore the time and expense for test can be reduced. But the magnitude of input excitation source must be defined by comparison with the excited energy on real field. The object of this paper makes the data base of domestic roads for the definition of input excitation source which is obtained by the measured data on special road in proving ground. These real field data on domestic roads are analyzed by the power spectral density and interrelationship index.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.605-616
• /
• 2013

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. In the present paper, characteristics of rail vibration and radiated sound power from concrete slab tracks for domestic high speed train(KTX) is investigated by means of a numerical method. The waveguide finite element and boundary element are combined and applied for this analysis. The concrete slab track is modelled simply with a rail and rail pad regarding the concrete slab as a rigid ground. The wave types which contribute significantly to the rail vibration and radiated noise are identified in terms of the mobility and decay rates. In addition, the effect of the rail pad stiffness on the radiated power is examined for two different rail pad stiffnesses.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.502-507
• /
• 2011

A study on environmental noise hasn't fully researched yet. As society has developed and the quality of life has improved, people started to show a concern about an environmental noise. To ensure a economic feasibility of countermeasures of noise, it is necessary to apply a cost-benefit analysis on choosing optimum measurements. In this study, we addressed the estimation method of the environmental noise value and several domestic and oversea case studies. We also estimate economic value of noise reduction level which is gained from applying noise reduction measurements.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2213-2219
• /
• 2008

Customer complaints on noise from the power transformer have been increased because of their concerns on environment. In order to solve fundamental noise problem of the transformer, KEPCO and domestic transformer manufacturers are developing 55 dBA class low noise transformers. To check accordance of the noise abatement law, we study relation between transformer noise level and substation border noise level. We present 'noise level of the substation border' under operating conditions and transformer noise level change. We also present an appropriate noise level of the transformer that satisfy the noise abatement law for outdoor substations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.161-166
• /
• 2012

This Study, as part of a study on the application plan of overseas noise prediction models suitable for making domestic noise maps, analyzed the correlation between the differences in predicted noise levels by individual noise prediction model and surveyed data on General roads and Expressways. Separation distances of 5m and 10m, respectively were set from the ends of the general roads and the expressways at the points of measurements and to check the distribution patterns of sound power levels, the levels were measured at the heights of 1.5m and 3m, respectively. The latest revised versions of the five models (CRTN, RLS90, NMPB, Nord2000, ASJ2008) suggested in The Method of making Noise Maps were used as prediction models, and predicted noise levels were calculated by using commercial software SoundPLAN (Ver 7.1).