• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.931-938
• /
• 2006

It is important to operate an education resources which could be integrated to an system. But most of existing education information system was not developed with standardization. It is need the core education asset and reusable education service to make a good education system. Consequently, it is needed to use Sharable Content Object Reference Model(SCORM) based contents managing in order to reuse the contents of education. And it needs assembling and producing method with reusable core asset of education system to develop the application program for education. In this thesis, we study the Teaching-Learning supporting system to support systematic education resources. Teaching-Learning support system is developed of educational domain assess through development process based on Model Driven Architecture(MDA) and core asset on each stage. Application program of education is developed using MDA automatic tool through analyzing and designing for contents storage which is based on contents meta model. We finally can develop the application software of education with low cost and high productivity by raising the reusability of education contents and by using the core asset to the whole development process.

• Economic and Environmental Geology
• /
• v.32 no.2
• /
• pp.189-201
• /
• 1999

Paleomagnetic and rock magnetic investigations have been carried out for the Cretaceous Hanyang Group, exposed in the Yongyang Sub-Basins within the Kyeongsang Basin, eastern South Korea. A total of 452 oriented core samples was drilled from 31 sits for the study. The in-situ site mean direction is more dispersed than the mean direction after bedding correction, indicating that the fold test is positive at 95% confidence level. In addition, the stepwise unfolding of the characteristic remanent magfold test is positive at 95% confidence level. In addition, the stepwise unfolding of the characteristic remanent magnetization reveals that a maximum value of k is observed at 90% unfolding. Furthermore, the rock magnetic investigations and electron microscope observations of the representative samples show that the main magnetic carrier of the Hayang Group is the detrital specular hematite of single and pseudo-single domain sizes with negligible contribution of pigmentary hematite grains. These results collectively imply that the ChRM direction is the primary component acquired at the time of the formation of the strata. Provided the primary nature of the ChRM, a magnetostratigraphic correlation between polarities of the studied formation and the Geomagnetic Time Scale indicates that the Hayang Group in the Yongyang Sub-Basin can be correlated to the Cretaceous Long Normal superchron. The paleomagnetic pole position from this study is significantly different from those of the Hayang group in the Euiseong the Milyang sub-Basins. Rather the paleomagnetic pole position of the Hayang Group of the study area is closer to that of the Quaternary period or present time of the Korean Peninsula. It is hypothesized that the study area might be rotated about 25$^{\circ}$ aticlockwise with respect to the Euiseong and Milyang Sub-Basins after the formation of the strata and aquisition of the ChRM, although there is not enough geologic evidence supporting the rotation hypothesis.

• Korea-Australia Rheology Journal
• /
• v.17 no.3
• /
• pp.125-130
• /
• 2005

Coalescence process of binary immiscible fluid mixtures having bimodal size distributions, prepared by mixing two pre-sheared samples at different shear rates, ${\gamma}_{pre1}\;and\;{\gamma}_{pre2}$, under shear flow at a final shear rate, ${\gamma}_f$, are examined by transient shear stress measurements and microscopic observations in comparison with the results for simply pre-sheared samples having narrow size distributions (unimodal distribution samples). Component fluids are a silicone oil (PDMS) and a hydrocarbon-formaldehyde resin (Genelite) and their viscosities are 14.1 and 21.0 $pa{\cdot}sec$ at room temperature $(ca.\;20^{\circ}C)$, respectively. The weight ratio of PDMS: Genelite was 7:3. Three cases, $({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;({\gamma}_{pre1}=0.8sec^{-1},\;{\gamma}_{pre2}=4.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;and\;({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0^sec^{-1}\;and\;{\gamma}_f=7.2sec^{-1})$ the first case, transient shear stress did not show any significant difference but domains larger than the initial state are observed at short times. In the latter cases, there exist undershoot of shear stress, reflecting existence of deformed large domains, which is confirmed by the direct observation. It is concluded that coalescence between large and small domains more frequently occur than coalescence between the domains with similar size in the bimodal distribution samples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1833-1843
• /
• 1999

in this paper, we analyze the effects of PN sequence phase on the multiple access interference (MAI) of multi-media multi-rate DS/CDMA system with variable spreading gain (VGS) scheme, and furthermore derive the bit error rate (BER) equation for MAI users with different powers and spreading gains. In the sequel, we verify the influences of deterministic sequences on the bit error rate performance. As the results of the bit error rate of a desired user against interfering users with different spreading gains and different transmit powers, it is shown that the domain factor to determine the MAI component could be different according to the data transmission rate of a desired user. We also show that any kind of PN sequence phase does not yield considerable advantage, unless $E_b/N_o$ is considerably greater than 10dB, since below that value AWGN dominates. However, when the higher $E_b/N_o$, the performance of both MSQCC/CO and CO/MSQCC criterion give the better results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.823-830
• /
• 2015

Structural optimization pursues improved performance of structures. Nowadays, structural optimization is applied to the design of huge and complex structures such as an airplane. As the number of the finite elements is increased, the analysis solution becomes more accurate. However, the design cost using the finite element model is significantly increased. The component mode synthesis method that is using the substructure synthesis method is frequently employed in order to keep the accuracy and reduce the cost. A new design method for structural optimization is proposed to reduce the design cost and to consider the dynamic effect of the structure. The proposed method reduces the design cost by applying the equivalent static loads on the design domain. An example of linear dynamic response optimization is solved and the efficiency of the proposed method is demonstrated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.483-489
• /
• 2017

An ultrasonic technique was developed to characterize the resonance behavior of a microcantilever operating in a megahertz regime. A high-power ultrasonic pulser and a contact transducer were employed to excite the silicon microcantilever, and a Michelson interferometer was used to obtain the time domain waveform. The natural frequency of the microcantilever was evaluated through the fast Fourier transform of the signal, and a numerical analysis using the finite element method confirmed the measurement data. The present study proposes a novel and facile method to evaluate nanoscale materials and structures with high sensitivity compared to conventional approaches.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.319-329
• /
• 1997

Wigner-Ville distribution has been recognized as a useful tool and applied to various types of mechanical noise and vibration signals, but its limitation which mainly comes from the cross-talk has not been well addressed. The cross-talk takes place for a signal with multiple components, simply because the Wigner-Ville distribution is a bilinear transform. The cross-talk often causes a negative value in the distribution. This cannot be accepted for the Wigner- Ville distribution, because it is an expression of power. Smoothing the Wigner-Ville distribution by convoluting it wih a window, is most commonly used to reduce the cross-talk. There can be infinite number of distributions depending on the windows. In this paper, we attempted to develop a distribution which is the best or the optimal in reducing the cross-talk. This could be possible by employing the ambiguity function. For a general signal, however it is difficult to express the ambiguity function as a mathematically closed form. This requires an appropriate modeling to make such expression possible. We approximated the Wigner-Ville distribution as a sum of linear segments. In the ambiguity function domain, the legitimate components are reflected as linear lines passing through the origin. Every lines has its own length and slope. But, the cross-talk is widely distributed in the ambiguity function plane. Based on this realization, we proposed a two-dimensional window which is in fact 'rotating window', that can eliminate cross-talk component. The rotating window is examined numerically and is found to have a better performance in reducing the cross-talk than conventional windows, the Gaussian window.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.905-916
• /
• 2008

In this paper, we propose a new method which estimates and encrypts significant component of digital hologram using discrete wavelet packet transform (DWPT). After analyzing the characteristics of digital hologram in spatial and frequency domain, the required information for ciphering digital hologram was extracted. Based on this information an ciphering method was proposed with wavelet transform and packetization of subbands. The proposed algorithm can encrypt digital hologram in various robust from selecting transform-level and energy threshold. From analyzing the encryption effect numerically and visually, the optimized parameter for encryption is presented. Without additional analyzing process, one can encrypt efficiently digital hologram using the proposed parameter. Although only 0.032% among total data is encrypted, the reconstructed object dose not identified. The paketization information of subbands and the cipher key can be used for the entire secret key.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.37-44
• /
• 2002

The polymer blends of waste polyvinyl chloride (RPVC) and waste polyethylene(RPE) were prepared by melt mixing, and their morphology and tensile properties were evaluated after the copolymers having an ethylene group in backbone and ester group in side position were added as comptatibilizers. The blend compositions were varied as follows ; RPVC/RPE 85/15 wt%, where RPVC formed a continuous phase : 50/50, mid composition : 15/85, RPE a continuous phase. The blends revealed a very low compatibility between component polymers because they showed domain sizes greater than $10\mu\textrm{m}$ over all compositions, especially the worst compatibility around mid composition. The blends showed higher compatibility when ethylene vinylacetate copolymer(EVA) and ethylene ethylacrylate-graft-methyl methacrylate copolymers(EEA-MMA) were added.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.416-424
• /
• 2011

The recent development of USN (Ubiquitous Sensor Network) technology has broadened its applications to many fields of industry. The USN technology enables the system to monitor and control the status of distributed sensor nodes based on the low-powered communications. Applying the USN in the train control domain, the operational efficiency can be enhanced, where the reliability and the safety of the system are the key challenges. This paper suggests the system design for evaluating and improving the reliability and safety of the gateway, which is a USN component that manages the radio network among the sensors and collects the information from them. For this purpose, the reliability and the level of safety integrity of a general gateway have been predicted quantitatively and the supplementary design has been proposed for the selected week points. The verification on the reliability and the safety of the improved gateway according to the related standards has been followed. With the results of the study, the applicability of USN gateway for train control systems has been reviewed.