• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.221-227
• /
• 2014

In this paper, we propose a synthesis method that can effectively suppress the ambience which affects tonal components in the PS decoder. Ambience component was obtained by using decorrelation filter and the weighting of the ambience in the decoder was determined through IC parameter. However, since the parameters are extracted in the sub-band domain, a low IC value could be analyzed even if the tonal component is dominant. The quality of the output signal may be degraded. To prevent this problem, the tonality was measured in the downmixed signal and the weighting of the ambience components were adjusted appropriately according to the measured tonality index. The performance of the proposed method was evaluated by simulations. Furthermore, the subjective test was performed and the results confirmed that the proposed method offers improved quality.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.491-497
• /
• 2005

Brake system is indispensible functional part to the transportation machines such as railroad cars, and all of industrial machines. It is mechanical element to stop the movement or slow the speed, transforming kinetic energy of motion object into thermal energy through solid friction. According that recently the railroad cars have become high-speed, the technique in braking domain to secure the overall braking effort is making rapid progress. In particular, material development and manufacturing process are so important to secure friction performance, which is the core in braking performance of mechanical brake units. Wear of brake disk could mainly result in the diminishment of its life span due to thermal cracking, so the endurance against high temperature is required. On the other hand, in this case, the problem is that the side wear of pad, relative material is slightly increased because of enlargement of plastic deformation. It is necessary, therefore, to develop a disk material that will be used in the Tilting System mechanical brake units. The purpose of this paper is to make a study prior to developing brake disk of Tilting Train travelling at 200km/h and to propose the component of brake disk. Accordingly, I will conduct sufficient researches on technical documents of brake disk, that are basic documentations, analyze an impact on components, and further, considering braking degree of train, study for the basic proposal on brake disk's component of the train travelling at 200km/h, which has relatively minor influence of heat stress and maintains the friction. In this respect, I would like to investigate friction characteristics between disk and relative friction material via Test on some possible test segments, analyze and propose friction performance, temperature impact and so forth coming from the contact with pad, relative material to demonstrate the friction characteristics.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.450-463
• /
• 2018

Sound based machine fault diagnosis is the process consisting of detecting automatically the damages that affect the machines by analyzing the sounds they produce during their operating time. The collected sounds being inevitably corrupted by random disturbance, the most important part of the diagnosis consists of discovering the hidden elements inside the data that can reveal the faulty patterns. This paper presents a novel feature extraction methodology that combines various digital signal processing and pattern recognition methods for the analysis of the sounds produced by the drills. Using the Fourier analysis, the magnitude spectrum of the sounds are extracted, converted into two-dimensional vectors and uniformly normalized in such a way that they can be represented as 8-bit grayscale images. Histogram equalization is then performed over the obtained images in order to adjust their very poor contrast. The obtained contrast enhanced images will be used as the features of our diagnosis system. Finally, principal component analysis is performed over the image features for reducing their dimensions and a nonlinear classifier is adopted to produce the final response. Unlike the conventional features, the results demonstrate that the proposed feature extraction method manages to capture the hidden health patterns of the sound.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.89-95
• /
• 2006

The performance of blind source separation(BSS) using independent component analysis (ICA) declines significantly in a reverberant environment. A post-processing method proposed in this paper was designed to remove the residual component precisely. The proposed method used modified NLMS(normalized least mean square) filter in frequency domain, to estimate cross-talk path that causes residual cross-talk components. Residual cross-talk components in one channel is correspond to direct components in another channel. Therefore, we can estimate cross-talk path using another channel input signals from adaptive filter. Step size is normalized by input signal power in conventional NLMS filter, but it is normalized by sum of input signal power and error signal power in modified NLMS filter. By using this method, we can prevent misadjustment of filter weights. The estimated residual cross-talk components are subtracted by non-stationary spectral subtraction. The computer simulation results using speech signals show that the proposed method improves the noise reduction ratio(NRR) by approximately 3dB on conventional FDICA.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.451-454
• /
• 1997

It has been reported that sudden cardiac death and ventricular tachycardia occur after treatment of tetralogy of fallot(TOF). It is regarded that ventricular arrythmia is the main source or the sudden cardiac death, but it is not verified. It is likely that TOF has effect on the heart rate variability because of the ventricular arrythmia. We study how complex and periodic heart rate dynamics change in the normal children (n=13) and TOF children (n=13) throughout 24 hours. We recorded 24-hour holter ECG, and segmented each ECG data into 1 hour length. We analyze each HR time series, and quantify the overall complexity of each HR time series by its correlation dimension. We also calculate the power spectrum of HR, and obtain low-frequency component (0.03-0.15Hz) and high-frequency component (0.15-0.4Hz). We compare the results between normal and TOF groups throughout 24 hours. TOF group have lower correlation dimension ($4.055{\pm}0.4134$ vs. $4.9310{\pm}0.2054$, p<0.05) than the normal group, even though there are no significant differences in the low($0.9864{\pm}0.5598$ vs. $1.5560{\pm}0.8325$, p<0.05) and high($1.1168{\pm}0.1.1448$ vs. $0.9271{\pm}0.6528$, p<0.05) frequency components. It can be concluded that HR time series of TOF group are more regular than that of normal group, and that correlation dimension reveals a nonlinear characteristics of HR time series which is not determined in the frequency domain.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.85-92
• /
• 1999

The fact that material degradation can be evaluated by measuring nonlinear acoustic effect has been proposed by previous studies. The most conventional method to measure nonlinear acoustic effect is to measure the absolute magnitude of fundamental and $2^{nd}$ order harmonic frequency component in the propagated ultrasonic wave. For this aim, power spectral analysis technique has been used widely. However, the power spectral analysis has fatal disadvantage that the gaussian additive noise superimposed in the wave signal remains in the power spectrum domain. Moreover, the magnitude of $2^{nd}$ order harmonic frequency component generated by nonlinear effect is so small that it may be suppressed by the noise remained in the power spectrum. In order to overcome this problem, this paper proposes an alternative method using bispectrum analysis, which can reduce the effect of addictive gaussian noise and. the nonlinear parameter can be obtained more stably. Simulations showed that the proposed method can obtain the value of nonlinear parameter near to the true value in the case of low SNR signal. Also, in order to confirm the usefulness of our method in actual case, we compared the nonlinear parameter obtained by using both of power spectral and bispectral analysis for several specimen intentionally degraded by fatigue load.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.50-50
• /
• 2003

We have identified and analysed a putative response regulator two-component gene (CaSKN7) from Candida albicans and its encoding protein (CaSkn7). CaSKN7 has an open reading frame of 1677bp. CaSKN7 encodes a 559 amino acid protein (CaSkn7) with an estimated molecular mass of 61.1 kDa. CaSKN7 is a homologue of a Saccharomyces cerevisiae SKN7 that is the regulator involved in the oxidative stress response. To study the role of CaSKN7, we constructed a CAI4-derived mutant strain carrying a homozygous deletion of the CaSKN7 gene. In the caskn7 disruptant cells, the formation of germ tube require shorter time than that in the congenic wild-type strain but the growth of mycelium delayed in liquid media. In contrast, the caskn7 disruptant cells attenuate the differentiation in solid media and the virulence in mouse model system. Expression level of hypha-specific and virulence genes - HYR1, ECE1, HWP1, and ALS1 - in the caskn7 disruptant cells increased as compared with that in the congenic wild-type strain in 10％ serum YPD. Skn7 in 5. cerevisiae was found to bind the HSE element from the SSA promoter, Also, CaSkn7 contains heat shock factor DNA-binding domain and the promoters of these genes have HSE-like sties. Therefore these results show that CaSKN7 regulate the differentiation and virulence of C. albicans.

• Journal of Acupuncture Research
• /
• v.22 no.2
• /
• pp.123-132
• /
• 2005

Melittin,cationic 26-amino acid, is the principal component of the bee venom (BV) which has been used for treatment of inflammatory disease such as arthritis rheumatism NF-kB is activated by subsequent release of inhibitory IkB via activation of a multisubunit IkB kinase (IKK). We previously found that melittin bind to the sulfhydryl group of p50, a subunit of NF-kB. Since sulfhydryl group is present in kinase domain of IKKa and IKKb, melittin could modify IKK activity by protein-protein interaction. We therefore examined effect of melittin on IKK activities in sodium nitroprusside (SNP)-stimulated synoviocyte obtained from RA patients. Melittin suppressed the SNP-induced release of IkB resulted in inhibition of DNA binding activity of NF-kB and NF-kB-dependent luciferase activity. Consistent with the inhibitory effect on NF-kB activation, IKKa and IKKb activities were also suppressed by melittin. Surface plasmon resonance analysis realized that melitin binds to IKKa $(Kd\;=\;1.34{\times}10-9M)$ and IKKb$(Kd\;=\;1.0{\times}10-9M)$. Inhibition of IKKa and IKKb resulted in reduction of the SNP-induced production of inflammatory mediators NO and PGE2 generation. The inhibitory effect of melittin on the IKKs activities, binding affinity of melittin to IKKs, and NO and PGE2 generation were blocked by addition of reducing agents dithiothreitol and glutathione. In addition, melittin did not show inhibitory effect in the transfected Synoviocytes with plasmid carrying dominant negative mutant IKKa (C178A) and IKKb (C179A). These results demonstrate that melittin directly binds to sulfhydryl group of IKKs resulting in IkBrelease, thereby inhibits activation of NF-kB and expression of genes involving in the inflammatory responses.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.163-173
• /
• 1999

The CORBA provides a object-oriented middleware that lets applications extend their range across networks, languages, component boundaries, and operating systems. Java can provide a potable object that works in any operating system. Mapping Java into CORBA helps large scale information system operate through the Web by using the mobile code property of Java and object component technique of CORBA. This development environment is called the Object Web. This paper proposes an architecture of OSI network management with a CORBA manager using Object Web and an CORBA/CMIS gateway which apply a CMIS-level gateway model to gateway. In this architecture, CORBA manager is based on Object Web and can manage MOs in the OSI domain. The gateway has a role to translate CORBA IDLs into CMIS services and vice versa. In addition, an OSI agent is abstracted into a CORBA agent.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1733-1748
• /
• 1997

In this paper, we propose the classification scheme and retrieval mechanism which can apply to many application domains in order to construct the software reuse library. Classification scheme which is the core of the accessibility in the reusability, is defined by the hierarchical structure using the agglomerative clusters. Agglomerative cluster means the group of the reuse component by the functional relationships. Functional relationships are measured by the HACM which is the representation method about software components to calculate the similarities among the classes in the particular domain. And clustering informations are added to the library structure which determines the functionality and accuracy of the retrieval system. And the system stores the classification results such as the index information with the weights, the similarity matrix, the hierarchical structure. Therefore users can retrieve the software component using the query which is the natural language. The thesis is studied to focus on the findability of software components in the reuse library. As a result, the part of the construction process of the reuse library was automated, and we can construct the object-oriented reuse library with the extendibility and relationship about the reuse components. Also the our process is visualized through the browse hierarchy of the retrieval environment, and the retrieval system is integrated to the reuse system CARS 2.1.