• 대한전자공학회논문지SP
• /
• 제42권1호
• /
• pp.25-31
• /
• 2005

본 논문에서는 컬러 영상에서 Support Vector Domain Description (SVDD)를 이용한 얼굴 검출 방법을 제안한다. 기존의 훈련을 통한 얼굴 검출 방법은 얼굴 영상과 얼굴이 아닌 영상을 모두 사용해야 한다. 그러나, SVDD를 이용한 얼굴 검출은 단지 훈련을 위해 얼굴 영상만이 사용된다. SVDD의 훈련을 통해 나오는 값인 반지름과 중심 좌표를 통해 얼굴을 검출한다. 또한, 엔트로피를 이용한 임계값 추출 방법(Entropic Threshold)을 통해 얼굴 특징을 추출하고, 슬라이딩 윈도우(sliding window)기법을 통해 성능을 개선한다. 주성분 분석(Principle Component Analysis) 과 SVDD를 이용한 얼굴 검출 방법의 비교 실험을 통해 본 논문이 제안한 방법의 효율성을 확인한다.

• Structural Engineering and Mechanics
• /
• 제47권6호
• /
• pp.839-856
• /
• 2013

Metallic annular discs with their outer boundary fully constrained are studied with newly derived semi-analytical solutions for the effects of thickness variations under thermal loading and unloading. The plane stress and axisymmetric assumptions were adopted, and the thickness of the disk depends on the radius hyperbolically with an exponent n. Furthermore, it is assumed that the stress state is two dimensional and temperature is uniform in the domain. The solutions include the elastic, elastic-plastic and plastic-collapse behavior, depending on the values of temperature. The von Mises type yield criterion is adopted in this work. The material properties, Young's modulus, yield stress and thermal expansion coefficient, are assumed temperature dependent, while the Poisson's ratio is assumed to be temperature independent. It is found that for any n values, if the normalized hole radius a greater than 0.6, the normalized temperature difference between the elastically reversible temperature and plastic collapse temperature is a monotonically decreasing function of inner radius. For small holes, the n values have strong effects on the normalized temperature difference. Furthermore, it is shown that thickness variations may have stronger effects on the strain distributions when temperature-dependent material properties are considered.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제25권4호
• /
• pp.196-220
• /
• 2021

This study formulates a new geometric parameterization scheme to effectively address numerical analysis subject to the variation of the fiber radius of a square unit cell. In particular, the proposed mesh-morphing approach may lead to a parameterized weak form whose bilinear and linear forms are affine in the geometric parameter of interest, i.e. the fiber radius. As a result, we may certify the reduced basis analysis of a square unit cell model for any parameters in a predetermined parameter domain with a rigorous a posteriori error bound. To demonstrate the utility of the proposed geometric parameterization, we consider a two-dimensional, steady-state heat conduction analysis dependent on two parameters: a fiber radius and a thermal conductivity. For rapid yet rigorous a posteriori error evaluation, we estimate a lower bound of a coercivity constant via the min-θ method as well as the successive constraint method. Compared to the corresponding finite element analysis, the constructed reduced basis analysis may yield nearly the same solution at a computational speed about 29 times faster on average. In conclusion, the proposed geometric parameterization scheme is conducive for accurate yet efficient reduced basis analysis.

• 한국항해항만학회지
• /
• 제29권1호
• /
• pp.9-15
• /
• 2005

항만의 계획 및 개발단계에서 중요한 요소 중 하나는 항로의 설계이다. 대부분의 경우 수심이 확보되어 있는 수역이라면 항로의 설계의 핵심은 항로의 배치와 항로폭의 결정이 될 것이다. 본 연구에서는 가변범퍼영역모델을 이용하여 항로를 설계하고 평가한다 이 모델은 선박의 주요명세, 선박점용이론, 선박의 속력, 선박지휘자의 조선기술과 경험을 항로설계에 반영할 수 있으며, 특히 선박의 운동 및 조종특성에 영향을 주는 외력을 정확하게 반영할 수 있다. 이를 위해 선박조종자의 선박제어와 외력 등에 의해 생성되는 선박의 동적데이터를 분석하기 위해 전기능선박조종시뮬레이터를 이용하였으며, 항로의 적정성과 안전성을 평가하기 위해 점용도와 점용지수를 정의한다. 개발된 항로설계기법을 울산신항개발계획에 적용하였다. 이 계획에서 항로의 폭은 전장의 1.5배 중심교각 57도인 만곡부의 곡률반경은 전장의 5.0배로 설계하였으며, 항로부근에는 SBM이 위치하고 있다. 모델의 적용결과 항로의 폭과 곡률반경은 적절하지만, 대각도 변침과 항로부근에 위치한 SBM에 의해 선박조선상의 어려움이 야기되는 것으로 분석되었다.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.17-24
• /
• 2003

One of the most important performance criteria related to the gain tuning of controller for CNC machining center is the contour error. This study analyzed circular error by the axis-matched and mismatched cases. To reduce ellipse and radius error, it is necessary to set the gain for each axis to be same bandwidth and high response. Based on the analysis in the frequency domain, we simulate feed system by mathematical model and then predict bandwidth of each axis. For analysis of structure vibration while the each axis is moving, we try the various of measuring method and position loop is improved by jerk limit.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.174-181
• /
• 1999

This paper describes the effect of the stylus tip size on the shape error in surface topography measurement. To analyze the distortional effect of an actual surface geometry origination from the finite stylus size, the surface is modeled as a sinusoid and the stylus tip as a circle. The magnitude of this distortion is defined as the ration of standard deviation, and this is expressed as an analytic function of the stylus tip radius and the geometrical parameter of a sinusoid. In this paper, the spectrum analysis of the profile is applied to investigate the distortional effect due to the mechanical filtering of the stylus in the frequency domain. and, the cumulative power spectrum is proposed to assess the shape error of measured data according to the various stylus tip sizes. From these results, a new method to select proper stylus tip radius is proposed.

• 대한수학회보
• /
• 제55권6호
• /
• pp.1783-1789
• /
• 2018

This paper treats the class of normalized logharmonic mappings $f(z)=zh(z){\overline{g(z)}}$ in the unit disk satisfying ${\varphi}(z)=zh(z)g(z)$ is analytically typically real. Every such mapping f admits an integral representation in terms of its second dilatation function and a function of positive real part with real coefficients. The radius of starlikeness and an upper estimate for arclength are obtained. Additionally, it is shown that f maps the unit disk into a domain symmetric with respect to the real axis when its second dilatation has real coefficients.

• 전자통신동향분석
• /
• 제16권1호통권67호
• /
• pp.24-35
• /
• 2001

AAA는 복잡한 Inter-domain 응용 서비스의 등장으로 인해 이들 서비스들을 신뢰성 있고 안전하게 관리하기 위해 사용된다. IETF에서는 AAA를 위해 Remote Authentication Dial-In User Service(RADIUS)와 DIAMETER 프로토콜을 제안하고 있다. DIAMETER는 기존의 PPP와 Roaming, Mobile IP 같은 새로 출현하는 정책과 AAA 서비스를 위한 확장 기능을 제공하기 위한 Peer 기반의 가벼운 AAA 프로토콜이다. 본 논문에서는 DIAMETER 프로토콜에 대한 개요 및 메시지, 형식, 그리고 라우팅 방식에 대해서 기술한다.

• Journal of Microbiology and Biotechnology
• /
• 제9권4호
• /
• pp.381-385
• /
• 1999

Taq DNA polymerase from Thermus aquaticus has been shown to be very useful in a polymerase chain reaction. Taq DNA polymerase has a domain at the amino terminus (residues 1 to 290) that has 5'-3' exonuclease activity and a domain at the C-terminus that catalyzes the polymerase reaction. Taq DNA polymerase is classified into the Pol I family, which is represented by E. coli DNA polymerase I. The alignment of amino acid sequences for the 5'-3' exonuclease domains of the Pol I family DNA polymerases shows ten highly conserved carboxylic amino acids. Crystallographic studies suggested that six of the carboxylic amino acids are clustered within a 7 $\AA$ radius by chelating three metal ions in the active site. Those six carboxylic residues are mutagenized to alanines in order to better understand their function. All six carboxylic residues, Asp l8, Glu1l7, Asp1l9, Asp120, Asp142, and Aspl44, are crucial for catalysis of 5'-3' exonuclease.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.723-729
• /
• 2019

A theoretical analysis was conducted of convective instability driven by buoyancy forces under transient temperature fields in an annular porous medium bounded by coaxial vertical cylinders. Darcy's law and Boussinesq approximation are used to explain the characteristics of fluid motion and linear stability theory is employed to predict the onset of buoyancy-driven motion. The linear stability equations are derived in a global domain, and then cast into in a self-similar domain. Using a spectral expansion method, the stability equations are reformed as a system of ordinary differential equations and solved analytically and numerically. The critical Darcy-Rayleigh number is founded as a function of the radius ratio. Also, the onset time and corresponding wavelength are obtained for the various cases. The critical time becomes smaller with increasing the Darcy-Rayleigh number and follows the asymptotic relation derived in the infinite horizontal porous layer.