• Journal of Navigation and Port Research
• /
• 제28권3호
• /
• pp.269-276
• /
• 2004

The reclaimed land has peculiar characteristic of nature environment unlike midtown or inland and also, in comparison with inland, has bad weather condition, such as low temperature, strong wind, excessive sunshine, and moisture involved in a salt. Therefore the case of developing water front needs understanding characteristic of weather environment mused by reclamation in detail and proper development and organized maintenance. If development which doesn't investigate topographic and climate characteristic sufficiently is drove ahead, a rise of expense for energy and maintenance is going to be mused by deteriorating weather environmental, occurring a flaw of facility and calculating inaccurate capacity of facility. We looked into the weather state and drew up the standard weather data of the newport area in Busan which is reclaiming and developing now. In this research at the base qf the standard weather data, we calculate the dynamic peak loads for commerce, business and residence and then we utilize the results of the load calculation as basic information to determine facility capacity in the rear city of the newport area.

• Journal of the Microelectronics and Packaging Society
• /
• 제21권1호
• /
• pp.31-39
• /
• 2014

For mobile application, semiconductor packages are increasingly moving toward high density, miniaturization, lighter and multi-functions. Typical wafer level packages (WLP) is fan-in design, it can not meet high I/O requirement. The fan-out wafer level packages (FOWLPs) with reconfiguration technology have recently emerged as a new WLP technology. In FOWLP, warpage is one of the most critical issues since the thickness of FOWLP is thinner than traditional IC package and warpage of WLP is much larger than the die level package. Warpage affects the throughput and yield of the next manufacturing process as well as wafer handling and fabrication processability. In this study, we investigated the characteristics of warpage and main parameters which affect the warpage deformation of FOWLP using the finite element numerical simulation. In order to minimize the warpage, the characteristics of warpage for various epoxy mold compounds (EMCs) and carrier materials are investigated, and DOE optimization is also performed. In particular, warpage after EMC molding and after carrier detachment process were analyzed respectively. The simulation results indicate that the most influential factor on warpage is CTE of EMC after molding process. EMC material of low CTE and high Tg (glass transition temperature) will reduce the warpage. For carrier material, Alloy42 shows the lowest warpage. Therefore, considering the cost, oxidation and thermal conductivity, Alloy42 or SUS304 is recommend for a carrier material.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• 제17권11호
• /
• pp.1043-1049
• /
• 2007

Data transfer rate and storage capacity are main criteria of the performance of the optical disk drive. The highest data transfer rate and the largest storage capacity is most desirable. To increase these performances, the actuator of the optical disk drive should have a high servo bandwidth to compensate the vibration of an optical disk. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to increase the natural frequencies of the flexible modes. In this paper, we suggested a moving magnet type actuator having high frequencies of the flexible modes. Generally, the moving magnet type actuator has an advantage to increase the natural frequencies of the flexible modes because the moving magnet type actuator has simple structure and the Young's modulus of magnet is high. However, large moving mass and inefficiency of EM(electromagnetic) circuit cut down driving sensitivities of the actuator. To improve driving sensitivities, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, driving sensitivities and the natural frequencies of the flexible modes were improved by using DOE(design of experiments) for electromagnetic circuit and modifying the lens holder.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권4호
• /
• pp.477-484
• /
• 2002

Ninety pre-puberal (6-7 months) female and 15 pre-puberal male Black Bengal goats were collected on the basis of their phenotypic characteristics from different parts of Bangladesh. Goats were reared under semi-intensive management, in permanent house. The animals were vaccinated against Peste Des Petits Ruminants (PPR), drenched with anthelmentics and deeped in 0.5% Melathion solution. They were allowed to graze 6-7 h along with supplemental concentrate and green forages. Concentrates were supplied either 200-300 g/d (low level feeding) or quantity that supply NRC (1981) recommended nutrient (high level of feeding). Different physiological, productive and reproductive characteristics of the breed were recorded. At noon (temperature=$95^{\circ}F$ and light intensity=60480 LUX) rectal temperature and respiration rate of adult male and female increased from 100.8 to $104.8^{\circ}F$ and 35 to 115 breath/min, indicated a heat stress situation. Young female attain puberty at an average age and weight of 7.2$\pm$0.18 months and 8.89$\pm$0.33 kg respectively. Mean age and weight at 1st kidding were 13.5$\pm$0.49 months and 15.3$\pm$0.44 kg respectively. It required 1.24-1.68 services per conception with an average gestation length of 146 days. At low level of feeding the postpartum estrus interval was 37$\pm$2.6 days, which reduced (p<0.05) with high feeding level to 21$\pm$6.9 days. Kidding interval also reduced (p<0.05) from 192 d at low feeding level to 177 d at high feeding level. On an average there were two kiddings/doe/year. Average litter sizes in the 1st, 2nd, 3rd and 4th parity were 1.29, 1.71, 1.87 and 2.17 respectively. Birth weights of male and female kids were 1.24 and 1.20 kg respectively, which increased (p<0.05) with better feeding. Although kid mortality was affected (p<0.05) by dam's weight at kidding, birth weight of kid, milk yield of dam, parity of kidding, season of birth, but pre-netal dam's nutrition found to be the most important factor. Kid mortality reduced from 35% at low level of feeding to 6.5% at high level of feeding of dam during gestation. Apparently, this was due to high (p<0.05) average daily milk yield (334 vs. 556 g/d) and heavier and stronger kid at birth at high feeding level.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제3권2호
• /
• pp.177-187
• /
• 1993

The exposure levels of mixed organic solvents for 66 exposed workers in six paint manufacturing plants were evaluated. In 66 exposed workers and 30 control subjects, we also determined the concentrations of toluene and xylene metabolites, hippuric acid, ($o^-$, $m^-$, and $p^-$)methylhippuric acid. The results were as follow ; 1. Seven organic compounds, which on averge accounted for approximately 90% of the identified mass in each painting plants air samples, were selected for quantification : methyl ethyl ketone, ethyl acetate, methyl isobutyl ketone, toluene, butyl acetate, ethyl benzene, ($o^-$, $m^-$, $p^-$)xylene. 2. The average mixed organic solvent exposure levels in 66 points with workplce were 3.8ppm of MEK, 12.2ppm of ethyl acetate, 4.0ppm of MIBK, 28.7ppm of toluene, 3.8ppm of butyl acetate, 10.2ppm of ethyl benzene, 14.6ppm of xylene, respectively. 3. For the total 66 points with workplace, the rate of them of which mixed solvents in air was exceeded th TLV of 1.0 were obtained for 23%(15/66 point). 4. The concentrations of hippuric acid in urine of exposed group and control were $0.94{\pm}0.65g/g$ of creatinine, $0.16{\pm}0.11g/g$ of creatinine, respectively. 5. There was a linear correlation between the end shift hippuric acid acid levels in urine and exposed toluene in air : y=0.02079X+494.2, r=0.6488, n=55 y:hippuric acid in urine(mg/g of creatinine), x:toluene levels in air(ppb) Toluene levels of 100ppm in air have been caculated to hippuric acid of 2.57g/g of creatinine in urine. 6. There was a linear correlation between the end shift methylhippuric acid acid levels in urine and exposed xylene in air : y=0.01664X+31.6, r=0.7264, n=55 y:methylhippuric acid in urine(mg/g of crea.), x:xylene levels in air(ppb) Xylene levels of 100ppm in air have been caculated to methylhippuric acid of 1.69g/g of creatinine in urine.

• Journal of Chest Surgery
• /
• 제35권5호
• /
• pp.392-396
• /
• 2002

Background: Video-thoracoscopy is known to be an useful method to provide accurate pre-resectional staging in patients with lung cancer in addition to the conventional radiologic studies and mediastinoscopy, for the pleural cavity is inspected directly and biopsy specimens call be obtained. This study is undertaken to evaluate how video-thoracoscopy can be used in deciding pre-resectional stage Material and Method: Video-thoracoscopy was performed in patients with lung cancer who were scheduled for surgical resection based on the radiologic staging and mediastinoscopic biopsy. 37 patients were included in this study. Pre-thoracoscopically 18 cases were in TNM stage 1, 7 in stage 2, and 12 in stage 3. Result: In 15 of 37 cases, video-thoracoscopy could not be performed effectively due to heavy adhesions in the pleural cavity, diaphragmatic and chest wall invasion of tumor and bulky tumor mass es. Mediastinal lymph nodes were positive postresectionally in 6 of these 15 cases. In 22 cases, video-thoracoscopy was performed as usual. Positive mediastinal lymph nodes were identified in 2 cases and exploratory thoracotomy was prevented. Surgical resection were carried out in remaining 20 cases and 5 cases among them had positive mediastinal lymph nodes. Conclusion: We believe that it is difficult to perform pre-thoracotorny video-thoracoscopy for all lung cancer patients for there were many cases that thoracoscory could not be undertaken doe to heavy adhesions in the pleural cavity, tumor involvement of the chest wall and/or diaphragm and bulky tumor mass. However we think it is helpful in preventing unnecessary exploratory thoracotomy for some patients with lung cancer whom pre-thoracotomy video-thoracoscopy was carried out.

• Journal of the Korean Applied Science and Technology
• /
• 제32권4호
• /
• pp.639-648
• /
• 2015

Some materials of fatty acids in the biodiesel affect the physical/chemical properties like density, kinematic viscosity, total acid number and oxidation stability by forming an organic fatty acid in combination with oxygen in the air. To solve the problem of the oxidative stability of biodiesel, various kinds of antioxidant has added and analyze the characteristics of the physical/chemical property changes by the addition of antioxidant. Oxidation stability increased by the increase of additives content. The TBHQ among the seven kinds of the additives showed the best performance. Also, 4 kinds of additives like propyl gallate, butyl-amine and pyrogallo has showed above 10 hr of oxidation stability at the addition of 500 ppm. In case of pyrogallo, this is not appropriate as an additive to suitable quality standards of total acid number. TBHA, DTBHQ of hydroquinone was satisfied with the quality standard of oxidation stability but the target of this research(above 10 hr) did not satisfied with oxidation stability. Propyl gallate is also a suitable at the quality standards of total acid number but it was shown not to be an appropriate to the additives due to increasing the total acid number by increasing of the content of additives at the addition of 500 ppm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제34권9호
• /
• pp.1161-1166
• /
• 2010

Tapered roller bearings are core components of rotating machine parts and are simultaneously subjected to axial and radial loads. Life-shortening effect was particularly evident in the case of tapered roller bearings used in the input and output shafts of transmission; this shortening of life was a result of excessive axial pre-load, which is common in the transmission assembly line. In this study, we derived an equation for evaluating the life of tapered roller bearings subjected to excessive pre-load by using accelerated life test data. The DOE(Design Of Experiment) method and FEA(Finite Element Analysis) was used for determining the condition for performing an accelerated life test. This equation for evaluating the service life of the bearings was derived by analyzing the Weibull distribution of the test results. Using the derived equation the life evaluated was 6-7 times longer than that evaluated by the conventional $L_{10}$ bearing-life equation. The results of this study will be helpful in predicting the life of tapered roller bearings subjected to excessive pre-load and in designing reliable rotating machines.

• Korean Journal of Environmental Agriculture
• /
• 제21권3호
• /
• pp.189-196
• /
• 2002

This study was carried out to evaluate the pollutant removal efficiencies of the advanced drinking water treatment using ozonation process. For raw water, Nakdong River was used. By conducting continuous ozonation experiments, the following results were obtained. Efficiency of water treatment was enhanced with increase in ozone dosage. When ozone dosage of 3 mg/L was used, preozonation ot raw water reduced TDOC, ADOC, A &BDOC and NRDOC as much as 0.6 mg/L, 0.2 mg/L, 0.1 mg/L and 1.0 mg/L, respectively. On the other hand, content of BDOC increased at the level of 0.8 mg/L. Ratio of UV254 absorbance to DOC content by the preozonation with 1, 3 and 5 mg/L dosage were 0.048, 0.044 and 0.037, respectively. In case of postozonation, it were 0.018, 0.015 and 0.012, respectively. When the ratios of consumpted ozone content to 1 mg of initial DOC were 1.5 and 2.3 in preozonation and postozonation treatment, respectively, the highest DOC removal rates of 25% and 32% were obtained by the continuous ozonation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.298-298
• /
• 2009

미국의 DOE(Department of Energy)산하 EERE(Energy Efficiecy & Renewable Energy)에서 신재생 에너지 프로그램 평가를 하고 있다. 특히 General program evaluation Guide에는 많은 평가기관에서 제안되었던 5가지 방법 중 Outcome 평가는 프로그램의 목적을 얼마나 달성했는지를 측정하는 것으로 일정한 기간이 지난 후 프로그램의 목적을 달성함으로써 얻어지는 결과를 추산함으로써 그 기간 동안 프로그램이 의도했던 목적을 얼마나 잘 수행했는지를 보여준다. 한국에서 시행되고 있는 신재생에너지 보급 프로그램의 성과를 정량화 분석을 통하여 평가할 수 있어 국내 적용성이 크다. 본 연구에서는 미국 에너지부 EERE로부터 지원받아 NREL(National Renewable Energy Laboratory)에서 실행한 Utility Green Pricing 프로그램을 사례 분석하였다. Utility Green Pricing 프로그램은 1993년 시작되었으며 2002년 말 미국 전역의 300여개 시설을 통한 90개의 프로그램을 발전시킴으로써 소비자가 자발적으로 재생에너지 발전을 지원하기 위한 한 방법으로 최근 이런 프로그램 수는 증가하고 있다. 2002년 말 기준으로 국가 전기 사용자의 20%, 대략 270,000명의 소비자가 선택하였고 2002년 290MW급 재생에너지 설비용량과 2003년 140MW급 시설을 담당하였으며 미국 이외에 캐나다, 일본, 호주, 12개 유럽 국가들이 시행하고 있다. 이 프로그램 목표는 어떤 프로그램이 green pricing 프로그램의 소비자 참가와 재생에너지 구매의 최대화를 돕는지를 제공하는 것으로 Data Pool은 90개 프로그램 중 더 이상 실행하지 않는 4개를 제외한 86개로 응답률은 77%였다. 분석대상은 거주자와 비거주자로써 자료는 2003년 초 66개의 green pricing 프로그램의 질문서를 토대로 도출되었다. Green Pricing 프로그램 질문서는 참여, 지난해 판매, 재생에너지 공급, 할 증금(초과 구매력), 프로그램 디자인과 실행, 마케팅, 소비자를 위한 부가서비스 이렇게 총 7부분으로 나누어져있다. 특히 거주자와 비거주자와 참여, 재생에너지 판매량, 프로그램 수명, 사용하는 재생에너지의 종류, 프로그램 가격, 비용 할증료, 프로그램 평가의 종류, 프로그램 마케팅 노력, 참여자에게 제공되는 부수적 가치와 관련된 자료를 모으기 위해 실행되었다. 종속적 변수로 프로그램 유효성 측정과 관련된 비/거주자 참여와 재생에너지 구매를 선택하였으며 독립적 변수로 프로그램 디자인과 마케팅 특징을 들었다. 분석방법으로는 이변성과 다변성 통계적 분석을 이용하였다. 이변성 분석은 쉽게 개별적 독립 변수와 종속변수와의 직접적 관계를 보여주며 다변성 분석은 보다 정확한 영향 산정을 위해 선택한 복합적 독립변수를 이용하였다. 프로그램 유효성 측정을 위해 비/거주자 참여 퍼센트와 재생에너지 구매 퍼센트를 구하였다. 그러나 이 분석에 몇 가지 제한점이 있었다. 소비자 중 국외자의 영향으로 분석에 많은 영향을 주지 않지만 single utility 프로그램은 비거주자참여율과 재생에너지 구매율에 영향을 끼칠 가능성이 있으며 독립/설병변수를 프로그램성공을 위해 거듭 강조하지만 빠지거나 무딘 변수는 여전히 존재한다. 분석 대상이 2002년까지를 대상으로 하기 때문에 시간상의 지체 역시 문제가 될 수 있다. 다중공산성 역시 독립변수간의 상관관계가 나타나면서 발생된다. 하지만 몇 가지 재미있는 결과를 얻어냈다. 프로그램 기간이 소비자 응답에 영향을 미치며 초기 거주고객의 높은 구매력이 지속된다는 것이다. 가격 할증료와 최소 월사용료는 프로그램 성공 초기 결정요인이 되지 않는다. 작은 시설이 성공 달성가능성이 더 큰 것으로 나타났으며 비거주자의 사적 이득 제공 역시 성공 강화에 영향을 끼쳤다.