• Journal of the Korean Society of Combustion
• /
• v.20 no.4
• /
• pp.34-41
• /
• 2015

Oxy-methane nonpremixed flames diluted with $CO_2$ were investigated to clarify impact of radiation heat loss and chemical effects of additional $CO_2$ to oxidizer stream on flame extinction. Flame stability maps were presented with functional dependencies of critical diluents mole fraction upon global strain rate at several oxidizer stream temperatures in $CH_4-O_2/N_2$, $CH_4-O_2/CO_2$, and $CH_4-O_2/CO_2/N_2$ counterflow flames. The effects of radiation heat loss on the critical diluent mole fractions for flame extinction are not significant even at low strain rate in nonpremixed $CH_4-O_2/N_2$ diffusion flame, whereas those are significant at low strain rate and are negligible at high strain rate (> $200s^{-1}$) in $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ counterflow flames. Chemical effects of additional $CO_2$ to oxidizer stream on the flame extinction curves were appreciable in both $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ flames. A scaling analysis based on asymptotic solution of stretched flame extinction was applied. A specific radical index, which could reflect the OH population in main reaction zone via controlling the mixture composition in the oxidizer stream, was identified to quantify the chemical kinetic contribution to flame extinction. A good correlation of predicted extinction limits to those calculated numerically were obtained via the ratio between radical indices and oxidizer Lewis numbers for the target and baseline flames. This offered an effective approach to estimate extinction strain rate of nonpremixed oxy-methane flames permitting air infiltration when the baseline flame was taken to nonpremixed $CH_4-O_2/N_2$ flame.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.909-918
• /
• 2009

As a part of dissolved organic matter, dissolved organic carbon (DOC) or biodegradable DOC (BDOC) fraction in particular is one of important issues in water treatment. Due to role as a nutrient source for bacteria, BDOC, therefore, may cause regrowth problems in water distribution system. The main objectives of this study were to investigate the possibility to minimize the concentration of BDOC in advance water treatment process. DOC in water is fractionized into four fractions such as AnBDOC (adsorbable and non-biodegradable DOC) which possesses adsorption properties but no biodegradation ability; nABDOC (biodegradable and non-adsorbable DOC) which has biodegradation properties but no adsorption ability; ABDOC (adsorbable and biodegradable DOC) which has adsorption properties and biodegradable characteristic; and non-removal DOC (nAnBDOC) which do not have either adsorbability or biodegradability. BAC process was effective for adsorbable DOC (AnBDOC+ABDOC) removal. However, in some cases, the removal ratio of adsorbable DOC was not sufficient. BDOC removal rate is very low or irremovable. Thus, for the control of residual DOC, it is necessary to change the operation condition by BAC process. From the analysis results of DOC fractions, water treatment processes appeared to be effective because it could grasp a remarkable amount of biodegradable, adsorbable and non-removal DOC. The concentration of AOX in non-prechlorination process was reduced from 7.1 ${\mu}g$/L to 0.51 ${\mu}g$/L in BAC process followed by ozonation.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.81-91
• /
• 2022

The use of lithium-ion batteries increases significantly with the rapid spread of electronic devices and electric vehicle and thereby an increase in the amount of waste batteries is expected in the near future. Therefore, studies are continuously being conducted to recover various resources of cathode active material (Ni, Co, Mn, Li) from waste battery. In order to recover the cathode active material, black mass is generally recovered from waste battery. The general process of recovering black mass is a waste battery collection - discharge - dismantling - crushing - classification process. This study focus on the crushing/classification process among the processes. Specifically, the particle size distribution of various samples at each crushing/classification step were evaluated, and the particle shape of each particle fraction was analyzed with a microscope and SEM (Scanning Electron Microscopy)-EDS(Energy Dispersive Spectrometer). As a result, among the black mass particle, fine particle less than 74 ㎛ was the mixture of cathode and anode active material which are properly liberated from the current metals. However, coarse particle larger than 100 ㎛ was present in a form in which the current metal and active material were combined. In addition, this study developed a PBM(Population Balance Model) system that can simulate two-species mixture sample with two different crushing properties. Using developed model, the breakage parameters of two species was derived and predictive performance of breakage distribution was verified.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.933-940
• /
• 2013

In this study, we evaluated the heat release performance of two extruded-type and two swaged-type heat sinks used in an inverter for solar power generation. The number of fins and heat transfer areas of the two swaged-type heat sinks, namely S-62 and S-98, are 62 and 98 and $2.8m^2$ and $5.3m^2$, respectively. Those for the two extruded-type heat sinks, namely, E-38 and E-47, are 38 and 47 and $1.8m^2$ and $1.9m^2$, respectively. The heat release fractions of S-62 and S-98 were measured as 82.7 % and 86.3 %, respectively. Those of E-38 and E47 were measured to be 79.6 % and 81.6 %, respectively. In this experiment, despite the mass flow rates of air entering the heat sinks being almost the same, the heat release fractions increased with heat transfer area. Furthermore, despite S-62's heat transfer area being 47.4 % higher than that of E-47, its heat release fraction was higher by only 1.3 %. We believe that this indicates the better heat transfer property of the extruded-type heat sink. S-98's heat release is only 4.4 % higher than that of S-62, but its heat transfer area is 89.3 % higher; this suggests that its heat transfer area need to be optimized.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1154-1160
• /
• 2008

Changes of zinc speciation and dehydrogenase activity in soil were studied before and after a field scale phytoextraction by Fagopyrum esculentum at a paddy soil near a closed zinc mine. The concentrations of zinc in paddy soil, in which Fagopyrum esculentum was planted, ranged from approximately 600 mg/Kg(high Zn soil) to 300 mg/Kg(moderate Zn soil). Despite of severe growth inhibition by Zn at the high Zn region, Fagopyrum esculentum accumulated phytoavailable fraction of Zn absorbed from the soil, and enhanced soil dehydrogenase activity (DHA) that had been inhibited by Zn toxicity. After the plant cultivation of 2 months, the concentrations of phytoavailable Zn in the rhizosphere soil at high and moderate Zn region has decreased 25% and 75%, respectively. The amount of Zn reduction in the rhizosphere soil corresponds to that accumulated in plants (recovery 92$\sim$107%), which implies Fagopyrum esculentum removed Zn from the soil. DHA was inversely correlated to the total Zn concentrations in soil. Before plant cultivation, the DHA in the high Zn soil was twice lower than that in the moderate Zn soil. More than 35% of DHA increase was observed in both soils after the application of phytoextraction with Fagopyrum esculentum.

• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.1
• /
• pp.1-7
• /
• 1980

Gel filtration column chromatography (Sephadex G-75), dialysis an d Brushite column chromatography were carried out to separate the brown pigmented macromolecule from water extracts of the cured leaf tobaccos. The two distinct macromolecules having different molecular weight were separated by the Sephadex column chromatography. Brushite also separated two different species of macromolecules which might have different electronic structures. According to the enzymatic degradation of protein in Burley and Hicks, chymotrypsin showed the best degradation ratio, ie., 16-30% in Burley and 38-57% in Hicks. Similar effect was observed with pepsin. However, very low effect of degradation was revealed with trypsin. The sample treated with the proteolytic enzymes revealed the disappearance of the first peak and the slight decrease of the 2nd peak height in the separation profile of Sephadex. After dialysis, the brown pigmented macromolecule was pyrolyzed at $300^{\circ}C$ and the strongly fluorescent components not identified before pyrolysis were detected with TLC separation. Absorption spectrum of these fluorescent compounds was monitored in benzene and the absorption maxima at 265nm and 275 nm were obtained. Considering absorption maxima and shape of the spectrum, those fluorescent compounds seem to be PAH derivatives.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.355-361
• /
• 2006

Artificially crushed sands occupy approximately 30 percent of the total consumption in South Korea. The demand for the crushed sands is expected to rise in the future. Most manufacturers use granitic rocks to produce the crushed sands. During the manufacturing process, fine fractions (i.e., sludges or particles smaller than 63 microns) are removed through the process of flocculation. The fine fraction occupies about 15% of the total weight. The sludges are comprised of quartz, feldspars, calcite, and various kinds of clay minerals. Non-clay minerals occupy more than 75 percent of the sluges weight, according to the XRD semi-quantification measurement. Micas, kaolinites, chlorite, vermiculite, and smectites occur as minor constituents. The sludges from Jurassic granites contain more kaolinites and $14{\AA}$-types than those from the Cretaceous ones. The chemical analysis clearly shows the difference between the parent rocks and the sludges in chemical compositions. Much of colored components in the sludges was accumulated as the weathering products. Particle size analysis results show that the sludges can be categorized as silt loam in a sand-silt-clay triangular diagram. This result was for her confirmed by the hydraulic conductivity data. In South Korea, the sludges remained after crushed sand production are classified as an industrial waste because of their impermeability, and which is caused by their high silt and clay fractions.

• Food Science and Preservation
• /
• v.7 no.3
• /
• pp.308-312
• /
• 2000

The major fatty acids in the Zanthoxylum schinifolium seed oil were eicosenoic acid 30.88%, oleic acid 29.94%, linoleic acid 23.55% and palmitic acid 10.52%. Fatty acid profiles in the each lipid fractions by TLC of the Z. schinifolium seed oil showed the highest composition of eicosenoic acid in triglyceride fraction and oleic acid in other fractions. Mice (ddY male strain) being starved for 24 hr were injected into gastric directly 500 mg of the Z. schinifolium seed oil, and then blood samples were obtained 0, 3 and 6 hr after dosing. In our results, eicosenoic acid appeared to be significantly increased in the serum obtained from 3 and 6 hr after injection of the Z. schinifolium seed oil. In the control mice, however, the serum samples did not exhibited any change of the Z. schinifolium seed oil. Interestingly, eicosenoic acid was significantly increased in the liver of 6 hr mice after injection. In conclusion, eicosenoic acid was the major fatty acid in the Z. schinifolium seed oil, and this fatty acid was significantly increased in the serum obtained 3 and 6 hr after injection in mice.

• Journal of Life Science
• /
• v.32 no.10
• /
• pp.749-761
• /
• 2022

This study evaluated the antioxidizing and antiproliferative effects of Angelica japonica extract and its solvent-partitioned fractions. A dried sample of the halophyte A. japonica was extracted twice using methylene chloride (CH₂Cl₂) and extracted twice again using methanol (MeOH). The combined crude extracts were then fractionated by solvent polarity into distilled water (water), n-butanol (n-BuOH), 85% aqueous methanol (85% aq.MeOH), and n-hexane fractions. The antioxidant activities of the crude extracts and their solvent-partitioned fractions were assessed according to their DPPH radical and peroxynitrite scavenging abilities, formation of intracellular reactive oxygen species (ROS), DNA oxidation, NO production, and ferric reducing antioxidant power (FRAP). The crude extract showed significant antioxidant activity in the overall antioxidizing bioassay systems. Among solvent-partitioned fractions, good antioxidant activities were observed in n-BuOH and 85% aq.MeOH fractions and significantly correlated with the polyphenol and flavonoid contents of the samples. Furthermore, all samples tested, including the crude extract, not only showed cytotoxic effects against human cancer cells (AGS, HT-29, MCF-7, and HT-1080) but also prevented cell migration in a dose-dependent manner in the wound healing assay using HT 1080. Among the solvent-partitioned fractions, the 85% aq.MeOH fraction most effectively inhibited the invasion of HT-1080 cells. Therefore, these results suggest that A. japonica may be a potential antioxidizing and antiproliferative agent.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.610-619
• /
• 2022

Hydrogen is emerging as an alternative fuel for eco-friendly ships because it reacts with oxygen to produce electrical energy and only water as a by-product. However, unlike regular fossil fuels, hydrogen has a material with a high risk of explosion due to its low ignition point and high flammability range. In order to safely use hydrogen in ships, it is an essential task to study the flow characteristics of hydrogen leakage and diffusion need to be studied. In this study, a numerical analysis was performed on the effect of leakage, ventilation, etc. on ventilation performance when hydrogen leaks in an enclosed space such as inside a ship. ANSYS CFX ver 18.1, a commercial CFD software, was used for numerical analysis. The leakage rate was changed to 1 q, 2 q, and 3 q at 1 q = 1 g/s, the ventilation rate was changed to 1 Q, 2 Q and 3 Q at 1 Q = 0.91 m/s, and the ventilation method was changed to type I, type II, type III to analyze the ventilation performance was analyzed. As the amount of leakage increased from 1 q to 3 q, the HMF in the storage room was about 2.4 to 3.0 times higher. Furthermore, the amount of ventilation to reduce the risk of explosion should be at least 2 Q, and it was established that type III was the most suitable method for the formation of negative pressure inside the hydrogen tank storage room.