• Title/Summary/Keyword: Division of fraction

Search Result 1,081, Processing Time 0.033 seconds

Forecast Sensitivity to Observations for High-Impact Weather Events in the Korean Peninsula (한반도에 발생한 위험 기상 사례에 대한 관측 민감도 분석)

  • Kim, SeHyun;Kim, Hyun Mee;Kim, Eun-Jung;Shin, Hyun-Cheol
    • Atmosphere
    • /
    • v.23 no.2
    • /
    • pp.171-186
    • /
    • 2013
  • Recently, the number of observations used in a data assimilation system is increasing due to the enormous amount of observations, including satellite data. However, it is not clear that all of these observations are always beneficial to the performance of the numerical weather prediction (NWP). Therefore, it is important to evaluate the effect of observations on these forecasts so that the observations can be used more usefully in NWP process. In this study, the adjoint-based Forecast Sensitivity to Observation (FSO) method with the KMA Unified Model (UM) is applied to two high-impact weather events which occurred in summer and winter in Korea in an effort to investigate the effects of observations on the forecasts of these events. The total dry energy norm is used as a response function to calculate the adjoint sensitivity. For the summer case, TEMP observations have the greatest total impact while BOGUS shows the greatest impact per observation for all of the 24-, 36-, and 48-hour forecasts. For the winter case, aircraft, ATOVS, and ESA have the greatest total impact for the 24-, 36-, and 48-hour forecasts respectively, while ESA has the greatest impact per observation. Most of the observation effects are horizontally located upwind or in the vicinity of the Korean peninsula. The fraction of beneficial observations is less than 50%, which is less than the results in previous studies. As an additional experiment, the total moist energy norm is used as a response function to measure the sensitivity of 24-hour forecast error to observations. The characteristics of the observation impact with the moist energy response function are generally similar to those with the dry energy response function. However, the ATOVS observations were found to be sensitive to the response function, showing a positive (a negative) effect on the forecast when using the dry (moist) norm for the summer case. For the winter case, the dry and moist energy norm experiments show very similar results because the adjoint of KMA UM does not calculate the specific humidity of ice properly such that the dry and moist energy norms are very similar except for the humidity in air that is very low in winter.

Isolation of 20(S)-Ginsenoside Rg3 and Rg5 from the Puffed Red Ginseng (팽화 홍삼으로부터 20(S)-Ginsenoside Rg3와 Rg5의 분리 및 구조동정)

  • An, Young-Eun;Cho, Jin-Gyeong;Baik, Nam-In;Choi, Sung-Won;Hur, Nam-Yoon;Park, Seok-Jun;Kim, Byung-Yong;Baik, Moo-Yeol
    • Food Engineering Progress
    • /
    • v.14 no.2
    • /
    • pp.159-165
    • /
    • 2010
  • Red ginseng tail roots (9.8 g water/100 g sample) were puffed at 7, 8, 9, and 10 $kg_{f}/cm^{2}$ using a rotational puffing gun. Puffed red ginseng was extracted with 70% ethanol, and the concentrated extract was successively partitioned with diethyl ether, n-butanol and $H_{2}O$. Two unknown ginsenosides from puffed red ginseng were found at 63 and 65 min of retention time in HPLC chromatogram suggesting that chemical structure of some ginsenosides might be altered during the puffing process. Identification of two unknown compounds was carried out using TLC, HPLC and NMR. Two major compounds were isolated from TLC. According to TLC result, compound I was expected to be the mixture of ginsenosides Rk1 and Rg5, and compound II was expected to be a 20(S)-ginsenoside $Rg_{3}$. Three compounds were isolated from n-butanol fraction through repeated silica gel and octadecyl silica gel column chromatographies. From the result of $^{1}H$- and $^{13}C$-NMR data, the chemical structures of unknown compounds were determined as ginsenoside $Rg_{5}$ and 20(S)-ginsenoside $Rg_{3}$. Unfortunately, ginsenoside $Rk_{1}$ could not be separated from ginsenoside-$Rg_{5}$ in the compound I. It was carefully reexamined using HPLC and confirmed that the last unknown compound was ginsenoside-$Rk_{1}$.

Insecticidal Activity of Chinese Honeysuckle, Quisqualis indica Extracts against Scale Insects (사군자추출물의 깍지벌레류에 대한 살충활성)

  • Song, Jin Sun;Lee, Chae Min;Choi, Young Hwa;Lee, Dong Woon
    • The Korean Journal of Pesticide Science
    • /
    • v.18 no.2
    • /
    • pp.104-114
    • /
    • 2014
  • Scale insects heavily damaged many agricultural crops and trees in urban and forest areas. This study was conducted to carry out alternative control methods for environmentally friendly control of scale insects. Hot water extract of Quisquali indica produced high mortality against the black pine bast scale, Matsucoccus thunbergianae in previously experiment. Methanol extract obtained from fruit of Q. indica was successively fractionated using hexane, chloroform, ethyl acetate, buthanol and water which were examined by exposing for their insecticidal activity against four Cocoidea species (Eriococcus lagerstroemiae, Ceroplastes japonicus, Crisicoccus pini and Planococcus citri) in laboratory. Hexane fraction gave the highest insecticidal activity against scale insect pest. GC-mass analysis confirmed that the main compounds of Q. indica were alpha-pinene, methyl palmitate, eugenol, methyl myristate, phthalic acid mono(2-ethylhexyl)ester and palmitic acid. Among those compounds, ${\alpha}$-pinene was included 10 hexane subfractions. $LC_{50}$ of ${\alpha}$-pinene was 0.0114 ppm against 2nd instar of E. lagerstroemiae. These results suggest that Q. indica extracts might be used as an alternative control agent of scale insects.

A Study on Flame Extinction in Oxymethane Combustion (메탄 산소 연소에 있어서 화염 소화에 대한 연구)

  • Kim, Tae Hyung;Kwon, Oh Boong;Park, Jeong;Keel, Sang-In;Yun, Jin-Han;Park, Jong Ho
    • Journal of the Korean Society of Combustion
    • /
    • v.20 no.4
    • /
    • pp.34-41
    • /
    • 2015
  • Oxy-methane nonpremixed flames diluted with $CO_2$ were investigated to clarify impact of radiation heat loss and chemical effects of additional $CO_2$ to oxidizer stream on flame extinction. Flame stability maps were presented with functional dependencies of critical diluents mole fraction upon global strain rate at several oxidizer stream temperatures in $CH_4-O_2/N_2$, $CH_4-O_2/CO_2$, and $CH_4-O_2/CO_2/N_2$ counterflow flames. The effects of radiation heat loss on the critical diluent mole fractions for flame extinction are not significant even at low strain rate in nonpremixed $CH_4-O_2/N_2$ diffusion flame, whereas those are significant at low strain rate and are negligible at high strain rate (> $200s^{-1}$) in $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ counterflow flames. Chemical effects of additional $CO_2$ to oxidizer stream on the flame extinction curves were appreciable in both $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ flames. A scaling analysis based on asymptotic solution of stretched flame extinction was applied. A specific radical index, which could reflect the OH population in main reaction zone via controlling the mixture composition in the oxidizer stream, was identified to quantify the chemical kinetic contribution to flame extinction. A good correlation of predicted extinction limits to those calculated numerically were obtained via the ratio between radical indices and oxidizer Lewis numbers for the target and baseline flames. This offered an effective approach to estimate extinction strain rate of nonpremixed oxy-methane flames permitting air infiltration when the baseline flame was taken to nonpremixed $CH_4-O_2/N_2$ flame.

Fractionation of DOC and its Correlation to AOX(FP) in the Advanced ater Treatment Process (고도정수처리 공정에서 DOC 분획 특성 및 AOX(FP)와의 관계)

  • Lee, Byung-Cheun;Choi, Kyung-Hee;Choi, Ja-Yoon;Lee, Chul-Hee
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.31 no.10
    • /
    • pp.909-918
    • /
    • 2009
  • As a part of dissolved organic matter, dissolved organic carbon (DOC) or biodegradable DOC (BDOC) fraction in particular is one of important issues in water treatment. Due to role as a nutrient source for bacteria, BDOC, therefore, may cause regrowth problems in water distribution system. The main objectives of this study were to investigate the possibility to minimize the concentration of BDOC in advance water treatment process. DOC in water is fractionized into four fractions such as AnBDOC (adsorbable and non-biodegradable DOC) which possesses adsorption properties but no biodegradation ability; nABDOC (biodegradable and non-adsorbable DOC) which has biodegradation properties but no adsorption ability; ABDOC (adsorbable and biodegradable DOC) which has adsorption properties and biodegradable characteristic; and non-removal DOC (nAnBDOC) which do not have either adsorbability or biodegradability. BAC process was effective for adsorbable DOC (AnBDOC+ABDOC) removal. However, in some cases, the removal ratio of adsorbable DOC was not sufficient. BDOC removal rate is very low or irremovable. Thus, for the control of residual DOC, it is necessary to change the operation condition by BAC process. From the analysis results of DOC fractions, water treatment processes appeared to be effective because it could grasp a remarkable amount of biodegradable, adsorbable and non-removal DOC. The concentration of AOX in non-prechlorination process was reduced from 7.1 ${\mu}g$/L to 0.51 ${\mu}g$/L in BAC process followed by ozonation.

Analysis of Crushing/Classification Process for Recovery of Black Mass from Li-ion Battery and Mathematical Modeling of Mixed Materials (폐배터리 블랙 매스(black mass) 회수를 위한 파쇄/분급 공정 분석 및 2종 혼합물의 수학적 분쇄 모델링)

  • Kwanho Kim;Hoon Lee
    • Resources Recycling
    • /
    • v.31 no.6
    • /
    • pp.81-91
    • /
    • 2022
  • The use of lithium-ion batteries increases significantly with the rapid spread of electronic devices and electric vehicle and thereby an increase in the amount of waste batteries is expected in the near future. Therefore, studies are continuously being conducted to recover various resources of cathode active material (Ni, Co, Mn, Li) from waste battery. In order to recover the cathode active material, black mass is generally recovered from waste battery. The general process of recovering black mass is a waste battery collection - discharge - dismantling - crushing - classification process. This study focus on the crushing/classification process among the processes. Specifically, the particle size distribution of various samples at each crushing/classification step were evaluated, and the particle shape of each particle fraction was analyzed with a microscope and SEM (Scanning Electron Microscopy)-EDS(Energy Dispersive Spectrometer). As a result, among the black mass particle, fine particle less than 74 ㎛ was the mixture of cathode and anode active material which are properly liberated from the current metals. However, coarse particle larger than 100 ㎛ was present in a form in which the current metal and active material were combined. In addition, this study developed a PBM(Population Balance Model) system that can simulate two-species mixture sample with two different crushing properties. Using developed model, the breakage parameters of two species was derived and predictive performance of breakage distribution was verified.

Perfonnance Evaluation of Swaged- and Extruded-type Heat Sinks Used in Inverter for Solar Power Generation (태양광 발전용 인버터 방열에 사용되는 압입형 및 압출형 히트싱크의 방열 성능 평가)

  • Kim, Jung Hyun;Lee, Gyo Woo
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.37 no.10
    • /
    • pp.933-940
    • /
    • 2013
  • In this study, we evaluated the heat release performance of two extruded-type and two swaged-type heat sinks used in an inverter for solar power generation. The number of fins and heat transfer areas of the two swaged-type heat sinks, namely S-62 and S-98, are 62 and 98 and $2.8m^2$ and $5.3m^2$, respectively. Those for the two extruded-type heat sinks, namely, E-38 and E-47, are 38 and 47 and $1.8m^2$ and $1.9m^2$, respectively. The heat release fractions of S-62 and S-98 were measured as 82.7 % and 86.3 %, respectively. Those of E-38 and E47 were measured to be 79.6 % and 81.6 %, respectively. In this experiment, despite the mass flow rates of air entering the heat sinks being almost the same, the heat release fractions increased with heat transfer area. Furthermore, despite S-62's heat transfer area being 47.4 % higher than that of E-47, its heat release fraction was higher by only 1.3 %. We believe that this indicates the better heat transfer property of the extruded-type heat sink. S-98's heat release is only 4.4 % higher than that of S-62, but its heat transfer area is 89.3 % higher; this suggests that its heat transfer area need to be optimized.

메밀경작에 의한 논토양 내 아연존재형태 및 탈수소효소-활성도 변화

  • Nam, Yoon-Sun;Lee, In-Sook;Bae, Bum-Han
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.30 no.11
    • /
    • pp.1154-1160
    • /
    • 2008
  • Changes of zinc speciation and dehydrogenase activity in soil were studied before and after a field scale phytoextraction by Fagopyrum esculentum at a paddy soil near a closed zinc mine. The concentrations of zinc in paddy soil, in which Fagopyrum esculentum was planted, ranged from approximately 600 mg/Kg(high Zn soil) to 300 mg/Kg(moderate Zn soil). Despite of severe growth inhibition by Zn at the high Zn region, Fagopyrum esculentum accumulated phytoavailable fraction of Zn absorbed from the soil, and enhanced soil dehydrogenase activity (DHA) that had been inhibited by Zn toxicity. After the plant cultivation of 2 months, the concentrations of phytoavailable Zn in the rhizosphere soil at high and moderate Zn region has decreased 25% and 75%, respectively. The amount of Zn reduction in the rhizosphere soil corresponds to that accumulated in plants (recovery 92$\sim$107%), which implies Fagopyrum esculentum removed Zn from the soil. DHA was inversely correlated to the total Zn concentrations in soil. Before plant cultivation, the DHA in the high Zn soil was twice lower than that in the moderate Zn soil. More than 35% of DHA increase was observed in both soils after the application of phytoextraction with Fagopyrum esculentum.

The Isolation and Pyrolysis of the Brown Pigmented Macromolecule from the Cured Leaf Tobacco (잎담배 성분중 갈색고분자 물질의 분리정제 및 열분해에 관한 연구)

  • Chae, Quae;Park, Ji-Chang
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.2 no.1
    • /
    • pp.1-7
    • /
    • 1980
  • Gel filtration column chromatography (Sephadex G-75), dialysis an d Brushite column chromatography were carried out to separate the brown pigmented macromolecule from water extracts of the cured leaf tobaccos. The two distinct macromolecules having different molecular weight were separated by the Sephadex column chromatography. Brushite also separated two different species of macromolecules which might have different electronic structures. According to the enzymatic degradation of protein in Burley and Hicks, chymotrypsin showed the best degradation ratio, ie., 16-30% in Burley and 38-57% in Hicks. Similar effect was observed with pepsin. However, very low effect of degradation was revealed with trypsin. The sample treated with the proteolytic enzymes revealed the disappearance of the first peak and the slight decrease of the 2nd peak height in the separation profile of Sephadex. After dialysis, the brown pigmented macromolecule was pyrolyzed at $300^{\circ}C$ and the strongly fluorescent components not identified before pyrolysis were detected with TLC separation. Absorption spectrum of these fluorescent compounds was monitored in benzene and the absorption maxima at 265nm and 275 nm were obtained. Considering absorption maxima and shape of the spectrum, those fluorescent compounds seem to be PAH derivatives.

  • PDF

Mineralogical and Physico-chemical Properties of Fine fractions Remained after Crushed Sand Manufacture (국내 화강암류를 이용한 일부 인공쇄석사 제조과정에서 생기는 스러지의 광물.물리화학적 특성)

  • Yoo, Jang-Han;Ahn, Gi-Oh;Jang, Jun-Young
    • Journal of the Mineralogical Society of Korea
    • /
    • v.19 no.4 s.50
    • /
    • pp.355-361
    • /
    • 2006
  • Artificially crushed sands occupy approximately 30 percent of the total consumption in South Korea. The demand for the crushed sands is expected to rise in the future. Most manufacturers use granitic rocks to produce the crushed sands. During the manufacturing process, fine fractions (i.e., sludges or particles smaller than 63 microns) are removed through the process of flocculation. The fine fraction occupies about 15% of the total weight. The sludges are comprised of quartz, feldspars, calcite, and various kinds of clay minerals. Non-clay minerals occupy more than 75 percent of the sluges weight, according to the XRD semi-quantification measurement. Micas, kaolinites, chlorite, vermiculite, and smectites occur as minor constituents. The sludges from Jurassic granites contain more kaolinites and $14{\AA}$-types than those from the Cretaceous ones. The chemical analysis clearly shows the difference between the parent rocks and the sludges in chemical compositions. Much of colored components in the sludges was accumulated as the weathering products. Particle size analysis results show that the sludges can be categorized as silt loam in a sand-silt-clay triangular diagram. This result was for her confirmed by the hydraulic conductivity data. In South Korea, the sludges remained after crushed sand production are classified as an industrial waste because of their impermeability, and which is caused by their high silt and clay fractions.