• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.4
• /
• pp.241-244
• /
• 2000

This experiment was conducted to evaluate the effect on evapotranspiration and yield of soybean according to different soil water conditions, and to find the optimum time and amount for irrigation in soybean cultivation. The difference between potential evapotranspiration (PET) and maximum evapotranspiration (MET) during growing season of soybean planted in lysimeter was higher during reproductive stage than during vegetative one. The maximum crop coefficient was obtained at beginning seed stage of soybean. Soil water coefficient of irrigation treatment was higher than that of non-irrigation treatment during soybean growth stage in field experiment. Grain yield was highest in lysimeter due to its high water use efficiency and evapotranspiration rate.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.216-223
• /
• 2005

The coefficient of consolidation has been evaluated using the conventional oedometer tests based on the one-dimensional consolidation theory. In the field, however, the actual response of the soil will be subject to the three-dimensional condition during consolidation. In this research, a new estimation method of the coefficient of consolidation for the various stress-deformation conditions was proposed. The good agreement between the computed dissipation of pore pressure and the measured data confirms the usefulness and the applicability of the proposed method to predict the exact rate of consolidation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6571-6574
• /
• 2014

Background: Alcohol is well established as a risk factor for cancer development in many organ sites. To assess the reliability and validity of the Alcohol Use Disorders Identification Test - Consumption (AUDIT-C) for detecting alcohol use disorders or risky drinking in Japanese adults the present study was conducted. Materials and Methods: A test-retest method was applied with a 2-week interval with 113 health care employees. The k coefficient, Cronbach's coefficient alpha, Spearman's correlation coefficient, and intraclass correlation coefficient (ICC) were determined and the validity of the AUDIT-C was analyzed using the data from a nationwide survey on adult alcohol use conducted in 2008 (n=4,123). Results: The reliability of the AUDIT-C score was high (${\kappa}$ coefficient=0.63, Cronbach's alpha=0.98, correlation coefficient=0.95, and ICC=0.95). According to the likelihood ratio and Youden index, appropriate cutoffs for the AUDIT-C were ${\geq}5points$ in men and ${\geq}4$ points in women. The sensitivity and specificity of these cutoffs for identifying ${\geq}8$ points on the AUDIT were 0.88 and 0.80, respectively, for men (positive likelihood ratio [LR+]=4.5) and 0.96 and 0.87, respectively, for women (LR+=7.7). The sensitivity and specificity of the cutoffs for identifying ${\geq}12$ points on the AUDIT were 0.90 and 0.84, respectively, for men (LR+=5.8) and 0.93 and 0.94, respectively, for women (LR+=15.8). The sensitivity and specificity of the cutoffs for identifying ${\geq}16$ points on the AUDIT were 0.93 and 0.80, respectively, for men (LR+=4.7) and 0.92 and 0.98, respectively, for women (LR+=55.6). With higher scores on the AUDIT, the specificity decreased and false-positives increased. The appropriate cutoffs for identifying risky drinking were the same for both genders. Conclusions: The reliability and validity of the AUDIT-C are high, indicating that it is useful for identifying alcohol use disorders or risky drinking among the general population in Japan, a group at high risk of cancer development.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.1 s.68
• /
• pp.20-25
• /
• 2006

This paper deals with the design and aerodynamic analysis of a so-called 'ring-type' impulse turbine for wave energy conversion. Numerical analysis was performed using the CFD cock, FLUENT. The main idea of the proposed turbine rotor was to minimize the adverse effect of tip clearance of the turbine blade; the design was borrowed from a ducted propeller with connected ring tip for special purpose marine vehicles. Results show that the efficiency increases up to $10\%$, depending on flaw coefficient, with the higher flaw coefficient yielding better efficiency. Decrease of input coefficient CA was the main reason for higher efficiency. Performance of ring-type rotor at various design parameters, as well as flaw conditions, was investigated, and the advantages and the disadvantages of the present impulse turbine were also discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.303-314
• /
• 2010

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 49 kinds of the laboratory model tests were conducted. And the result the study suggested $\beta_s$, the stiffness coefficient to evaluate the stiffness effect of reinforcement materials. Then, it was also found that the stiffness coefficient, $\beta_s$ as the testing constant would be appropriate as high as 1.0, 1.1 and 1.5 for geotextile, geogrid and steel bar, respectively. And It was evaluated that the stiffness effect affecting reinforcement improvement effect would be reduced as the thickness of embeded depth increases and that RFe, the stiffness effect reduction coefficient would have positive correlation with H/B. Finally, it was confirmed that the bearing capacity gained from the method to calculate bearing capacity, which was suggested in the study, would almost correctly estimate the capacity, demonstrating the appropriateness of the proposed bearing capacity calculation method.

• Nuclear Engineering and Technology
• /
• v.44 no.1
• /
• pp.43-52
• /
• 2012

To compute a permeability coefficient along a rough fracture that takes into account the fracture geometry, this study performed detailed measurements of fracture roughness using a confocal laser scanning microscope, a quantitative analysis of roughness using a spectral analysis, and a homogenization analysis to calculate the permeability coefficient on the microand macro-scale. The homogenization analysis is a type of perturbation theory that characterizes the behavior of microscopically inhomogeneous material with a periodic boundary condition in the microstructure. Therefore, it is possible to analyze accurate permeability characteristics that are represented by the local effect of the facture geometry. The Cpermeability coefficients that are calculated using the homogenization analysis for each rough fracture model exhibit an irregular distribution and do not follow the relationship of the cubic law. This distribution suggests that the permeability characteristics strongly depend on the geometric conditions of the fractures, such as the roughness and the aperture variation. The homogenization analysis may allow us to produce more accurate results than are possible with the preexisting equations for calculating permeability.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.135-139
• /
• 2008

In this paper, tunable SC(switched capacitor) 2nd order bandpass $\Sigma-\Delta$(Sigma-Delta) modulator with novel architecture that can adjust the IF band center frequency by one coefficient value is proposed for data conversion in the IF(Intermediate Frequency) band. Its architecture can optionally adjust all the 2nd order noise transfer function in comparison with the conventional architecture. In order to adjust the center frequency, the conventional architecture needs the two variable coefficient values, basic clock and eight clocks. On the other hand, the proposed architecture can adjust the center frequency by one variable coefficient value and basic clock only.

• Communications for Statistical Applications and Methods
• /
• v.25 no.4
• /
• pp.373-383
• /
• 2018

The spatial scan statistic is a widely used method to detect spatial clusters. The method imposes a large number of scanning windows with pre-defined shapes and varying sizes on the entire study region. The likelihood ratio test statistic comparing inside versus outside each window is then calculated and the window with the maximum value of test statistic becomes the most likely cluster. The results of cluster detection respond sensitively to the shape and the maximum size of scanning windows. The shape of scanning window has been extensively studied; however, there has been relatively little attention on the maximum scanning window size (MSWS) or maximum reported cluster size (MRCS). The Gini coefficient has recently been proposed by Han et al. (International Journal of Health Geographics, 15, 27, 2016) as a powerful tool to determine the optimal value of MRCS for the Poisson-based spatial scan statistic. In this paper, we apply the Gini coefficient to normal-based spatial scan statistics. Through a simulation study, we evaluate the performance of the proposed method. We illustrate the method using a real data example of female colorectal cancer incidence rates in South Korea for the year 2009.

• Structural Engineering and Mechanics
• /
• v.49 no.6
• /
• pp.763-773
• /
• 2014

The recently developed Ultra High Performance Concrete (UHPC) displays outstanding compressive strength and ductility but is also subjected to very large autogenous shrinkage. In addition, the use of forms and reinforcement to confine this autogenous shrinkage increases the risk of shrinkage cracking. Accordingly, this study adopts a combination of shrinkage reducing admixture and expansive admixture as a solution to reduce the shrinkage of UHPC and estimates its appropriateness by evaluating the compressive and flexural strengths as well as the autogenous shrinkage according to the age. Moreover, the coefficient of thermal expansion known to experience sudden variations at early age is measured in order to evaluate exactly the autogenous shrinkage and the thermal expansion is compensated considering these measurements. The experimental results show that the compressive and flexural strengths decreased slightly at early age when mixing 7.5% of expansive admixture and 1% of shrinkage reducing admixture but that this decrease becomes insignificant after 7 days. The use of expansive admixture tended to premature the setting of UHPC and the start of sudden increase of autogenous shrinkage. Finally, the combined use of shrinkage reducing admixture and expansive admixture appeared to reduce effectively the autogenous shrinkage by about 47% at 15 days.

• Animal cells and systems
• /
• v.14 no.4
• /
• pp.291-296
• /
• 2010

Population ecological characteristics of growth and mortality play an important role in understanding the population dynamics of marine mammals. The instantaneous coefficients of natural and bycatch mortality were estimated for minke whales (Balaenoptera acutorostrata) in Korean waters using a population assessment model composed of bycatch and abundance data. The survivorship curve of this population was fitted to the data, and then the curve was revised using age-specific relative bycatchability coefficients ($q_t$). Instantaneous coefficients of natural and bycatch mortality of minke whales were estimated as 0.024/year and 0.076/year, respectively, and from this the survival rate was estimated as 0.905. This estimated survival rate was comparable to other cetaceans in other regions. The $q_t$ for this population ranged from 0.020 to 0.193. The revised survival rates were higher when the $q_t$ was taken into account. The mortality coefficient, survival rate, $q_t$ and survivorship curves had not previously been determined for minke whale in this area. This estimate could serve as fundamental information to assess the status of this population and for conservation and rational management.