• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1112-1120
• /
• 2017

Petroleum products are composed of various types of hydrocarbon compounds. Like other types of liquids, they presented the variation of density and volume according to temperature change. The method of measuring the density of petroleum products in a liquid phase is based on experimental data obtained mainly for each fractionally distilled petroleum product. In this study, the density and volume changes of kerosene and automotive diesel according to temperature change were measured and the property of change were analyzed. The conversion values were calculated using the density volume conversion table proposed by international standard ASTM. In addition, we analyzed the differences between the reference values and the measured values for the temperature changes specified in the domestic metering law.

• Nuclear Engineering and Technology
• /
• v.42 no.2
• /
• pp.175-182
• /
• 2010

As part of a fundamental study on the volume reduction of contaminated concrete wastes, the separation characteristics of the aggregates and the distribution of the radioactivity in the aggregates were investigated. Radioisotope $^{60}Co$ was artificially used as a model contaminant for non-radioactive crushed concrete waste. Volume reduction for radioactively contaminated dismantled concrete wastes was carried out using activated heavy weight concrete taken from the Korea Research Reactor 2 (KRR-2) and light weight concrete from the Uranium Conversion Plant (UCP). The results showed that most of the $^{60}Co$ nuclide was easily separated from the contaminated dismantled concrete waste and was concentrated mainly in the porous fine cement paste. The heating temperature was found to be one of the effective parameters in the removal of the radionuclide from concrete waste. The volume reduction rate achieved was above 80% for the KRR-2 concrete wastes and above 75% for the UCP concrete wastes by thermal and mechanical treatment.

• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.158-167
• /
• 2015

This study presents a new method to improve the speed of high quality volume rendering. We improve the speed of ambient occlusion which is one of the global illumination techniques used in traditional volume visualization. Calculating ambient occlusion takes much time because it determines an illumination value of a sample by integrating opacities of nearby samples. This study proposes an improved method for this by using local statistics such as averages and standard deviations. We calculate local statistics for each volume block, a set of nearby samples, in pre-processing time. In the rendering process, we efficiently determine the illumination value by assuming the density distribution as a normal distribution. As the results, we can generate high quality images that combine ambient occlusion illumination with local illumination in real time.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.79-90
• /
• 2019

This study aims to develop time headway distribution models of bicycle traffic flow in a uninterrupted bikeway. The sample data were collected and classified into two groups of traffic volume levels. The lower level traffic volume is defined to be under 8 bicycles per minute, and the higher one is greater or equal to 8 bicycles per minute. The data aggregation interval size was set to be 0.5-second. Four distribution models including normal distribution, negative exponential distribution, shifted negative exponential distribution, and Pearson III distribution were tested, and Chi-square test results shows that the negative exponential distribution and the shifted negative exponential distribution are well fitted to the sample data. Another test results with different sample data also shows the same conclusion.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.491-500
• /
• 1993

The adsorption of nitrogen (77K) and carbon dioxide(273K) was performed on a series of activated carbon fiber. Theadsorption iotherm of nitrogen was typical type 1 and that of carbon dioxide was convex. As the specific surface area increases, there are linear increases in BET constant C mean pore diameter, the width of pore size distribution, wide micropore volume, total micropore volume, total pore volume and external surface area, however, narrow micropore volume was nealy constant . The total micorpore volume fraction in total pore volume is above 97%.

• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.153-159
• /
• 2010

The 34 potently pig pheromonal odorants (1-32, 5755 & 7113) through structure-based virtual screening and ligand-based virtual screening method were selected and their ADMET and pharmacokinetics characters were evaluated and discussed quantitatively. The pheromonal odorants were projected on the following pre-calculated models, Caco-2 cell permeability, blood-brain barrier permeation, hERG inhibition and volume-distribution. From the results of in silico study, it is found that an optimal compound (31) either penetrating or have a little ($P_{caco2}$=-8.143) for Caco-2 cell permeability, moderate penetrating ability ($P_{BBB}$=0.082) for blood-brain barrier permeation, the low QT prolongation ($P_{hERG}$=1.137) for the hERG $K^+$ channel inhibition, and low distribution into tissues ($P_{VD}$=-5.468) for volume-distribution. Therefore, it is predicted that the compound (31) a topical application may be preferable from these based foundings.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.1-8
• /
• 2008

Dual-mode Phase Doppler Anemometry (DPDA) was used to scrutinize the spatial distribution characteristics of spray emanating from a small Liquid-Rocket Engine (LRE) injector. Droplet size and velocity were measured according to the variation of injection pressure along the plane normal to the spray stream and then the spray characteristic parameters such as Arithmetic Mean Diameter (AMD), Sauter Mean Diameter (SMD), number density, span of drop size distribution, and volume flux were deduced for an investigation of spray breakup characteristics. As the injection pressure increases, the number density, span, and volume flux of spray droplets become higher, whereas the AMD gets smaller.

• International Journal of Concrete Structures and Materials
• /
• v.2 no.2
• /
• pp.161-167
• /
• 2008

Optimization of concrete mixing system is very important for the production of quality mixture of concrete and requires very complicated, specialized knowledge as there are a variety of variables that influence the result. One of the methods of optimizing the concrete mixing system is to minimize the volume of cement paste which, in turn, means maximizing the volume of aggregate. The purpose of this study is to determine the minimum volume of cement paste used in the design of concrete mixture and to design the optimum concrete mixing system based on the fluidity of mortar and concrete. In determining the minimum volume of cement paste, experiments of mortar and concrete were performed based on their workability, material segregation and bleeding. Type of aggregate, granularity distribution and sand percentage were used as test parameters and measurements were taken of the distribution of granularity, usage of HRWRA, minimum volume of paste and drying shrinkage and compressive strength of concrete.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.340-343
• /
• 1992

In this paper, To estimate monthly water distribution volume required optimization control of operating scheme & water distribution management for water transmission system in water supply, both Thomas-Fiering technique and Fourier series are compared and analyzed, respectively. Since water distribution volume is periodically repeated and has a linear fluctuation trend, parameters in each element are estimated through dividing into linear fluctuation trend component and periodical component. Finally, results of time-series analysis are proved to be more reasonable than that of Thomas-Fiering techniques by comparing simulation with observation data.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.150-155
• /
• 1987

A new method of measurement of pore volume distribution in a porous material by adsorption of gases is proposed. In the newly proposed method the use of spherical molecules with relatively large molecular weight as adsorbates is strongly recommended to eliminate the troubles caused by stereospecificity and low boiling point of widely used $N_2$. It is also claimed that the universal t-curves that have been widely used since proposed by de Boer et al. must be replaced by the flat-surface isotherms that can be derived from the theory proposed by Chang et al. The results of analysis of pore volume distribution based on the method described in this paper are found to be reasonable and satisfactory.