• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.315-324
• /
• 2003

If an optimum design technique is applied in the design of packaging container for bulk-type products, merits on the side of not only economic and compression performance but distribution efficiency are expected. Accordingly, minimum board area (mRBA), compression strength (CS) and compression strength per unit area (mCSPA) are important design parameters in optimum design of packaging container for bulk-type products. In this study, mathematical models for mRBA, CS and mCSPA of container as algorithm for optimum design program were developed. In order to develop these models, compression test by various dimensions of container and response surface analysis for mRBA, CS, and mCSPA of container were carried out. In the developed models, volume, W/L ratio and depth of container were principal independent variables. On the found of these models, optimum design program having faculties of outward and inward optimum design and information design was developed. Though the packaging specifications are same, required board area, board combination and cost of the corrugated board required container manufacture were greatly different by boundary conditions in outward design. Moreover, about 6.3∼10.1% in weight of container was lighter, and about 13.2∼25.6% in cost of container was reduced when the program was applied for 2 kinds of bulk-type products.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.1-6
• /
• 2013

3D integrated circuit(IC) technology with TSV(through Si via) liquid cooling system is discussed. As a device scales down, both interconnect and packaging technologies are not fast enough to follow transistor's technology. 3D IC technology is considered as one of key technologies to resolve a device scaling issue between transistor and packaging. However, despite of many advantages, 3D IC technology suffers from power delivery, thermal management, manufacturing yield, and device test. Especially for high density and high performance devices, power density increases significantly and it results in a major thermal problem in stacked ICs. In this paper, the recent studies of TSV liquid cooling system has been reviewed as one of device cooling methods for the next generation thermal management.

• Journal of Animal Science and Technology
• /
• v.61 no.1
• /
• pp.47-53
• /
• 2019

This study was performed to evaluate the microbial and temperature changes of boxed beef during transport and distribution under vacuum and modified atmosphere packaging (MAP), and to compare between excision and swab sampling for 15 days. The top round and striploin (quality grade 1) from Hanwoo steers at 2 days post-slaughter were obtained from a local meat processing plants and chilled at $4{\pm}2^{\circ}C$ in a cold room. The boxes were transported under refrigeration ($4{\pm}2^{\circ}C$) to the laboratory within half an hour. Vacuum and MAP packs were subsequently taken out from cool boxes, and microbiological examinations were carried out at 0, 6, 12, and 24 h of storage time. MAP was more effective than vacuum packaging for the inhibition of total aerobic, lactic acid bacteria and Pseudomonas (p < 0.05). Microbial loads of swab methods were slightly lower than those of excision ones (p < 0.05). The results of this study could be utilized by meat consumers in future studies as well as by manufacturers to determine the ideal storage conditions for cool boxed meat, thus ensuring reduced economic losses due to spoilage.

• The Korean Journal of Franchise Management
• /
• v.2 no.2
• /
• pp.45-69
• /
• 2011

A basic function of packaging is preservability, delivery, subdivision, aesthetic and serviceability on packaging. Originally, the function and necessity of packaging is on preservability, but today it is expending before. then packaging is focusing on sales promotion. Although it is hard to say production itself, it could does when it is made. also, it is important for product to be goods when packaging and its materials are identification on matching each other. The role of packaging design is a core factor that satisfy consumer a various of needs and wants. In the past, the role of food packaging design is just preservability and delivery on product. but then, nawaday it is asked a various role. Not only present products have to get inherency but also have added value. That is, advanced technologies, information, and richness from materials which are diversity for coming a extention of choice. currently, food packaging design shouldn't have stayed on just packaging which cover beautiful. Packaging design is a symbolic sign. It is importance for manager to do R&D, producing, and distribution, also for consumer who use and buy the product whether manager and consumer think package design is a main mediation. This day, food design pay attention to be asking consumer's a number of sensitivity. It is the reason that the package is importance and exist. This article is to examine preservability, delivery, subdivision, aesthetic, serviceability, and environmental orientation in order to develop and show a method and theories to find package design in food industry the reason that why sales promotion and its profit increase. Consequently, draw on the function of package design effects the benefit on product is distribution. Green Design on the food packages by combining recycled and biodegradable food packages for the development of practices and long life to the look of the food package design practices.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.1
• /
• pp.17-26
• /
• 2018

This study aimed to investigate the effects of vacuum packaging on the quality characteristics of frozen Tteokgalbi made from spent laying hen meat and mechanically deboned chicken meat (MDCM). The samples were prepared with different levels of added MDCM; C (0%), T1 (20%), T2 (40%), and T3 (60%). The samples were allocated for microbiological and physico-chemical analyses after 0, 45, and 90 days at $-18^{\circ}C$, with or without vacuum packaging. After 90 days of storage, the values of volatile basic nitrogen were significantly lower in the vacuum packaged samples compared to the non-vacuum samples, irrespective of the added levels of MDCM (p<0.05). Sensory results at day 0 of storage showed that the texture scores of C and T1 samples were significantly higher than those of T2 and T3, while the flavor scores were the lowest for the T3 samples (p<0.05). In addition, with increased storage duration, the texture and flavor attributes of the vacuum-packaged samples were found to be higher than those of non-vacuum samples. In general, the vacuum-packaged samples tended to show superior physico-chemical quality characteristics compared to the non-vacuum samples, when the storage time was extended up to 90 days.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.175-180
• /
• 2021

Although it has recently been regulated for use as an eco-friendly policy in Korea, the use of EPS (Expanded Polystyrene) cooling boxes, which are used as cold chain delivery insulation boxes for fresh agricultural and livestock products, is also increasing rapidly as e-commerce logistics such as delivery have increased rapidly due to COVID-19. Studies were conducted to optimize the EPS cooling container through internal air heat flow of CFD (Computational Fluid Dynamics) analysis and FEM (Finite Element Method) random vibration analysis using domestic PSD (Power Spectral Density) profile of the EPS cooling box to which the refrigerant is applied in this study. In the analysis of the internal air heat flow by the refrigerant in the EPS cooling box, the application of vertical protrusions inside was excellent in volume heat flow and internal air temperature distribution. In addition, as a result of random vibration analysis, the internal vertical protrusion gives the rigid effect of the cooling box, so that displacement and stress generation due to vibration during transport are smaller than that of a general cooling container without protrusion. By utilizing the resonance point (frequency) of the EPS cooling box derived by the Model analysis of ANSYS Software, it can be applied to the insulation and cushion packaging design of the EPS product line, which is widely used as insulation and cushion materials.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.902-911
• /
• 2010

Oriental melon ($Cucumis$ $melo$ var. $makuwa$) is a popular and high-value market fruit cultivated in Korea. Consumers are becoming increasingly interested in oriental melon as a healthy diet over the past few years. However, the melons have relatively high quality loss because the fruit are mainly produced for a limited period of time in the summer season. Lack of the proper postharvest treatments and high temperature exposure at harvest or during distribution are the most critical environmental factors limiting postharvest life of fruit. This review focuses on the overview of current research studies for postharvest treatment and functional packaging technology of oriental melon in Korea. Major physiological problems of the harvest fruit include the ripening process in quality changes of the produce such as loss of weight, firmness, flavor, and decay during the storage periods. Low temperature at 7 to $10^{\circ}C$ with high relative humidity of 90 to 95% is the suitable environmental condition used to maintain the quality of fresh oriental melon. Controlled atmosphere (CA) storage or modified atmosphere (MA) packaging can be used as supplemental treatments to extend postharvest-life. For oriental melon, an optimum CA is currently recommended to be 2-3% oxygen and 5-10% carbon dioxide atmosphere. Precooling, pretreatments of ethylene action and functional packaging system can be applied to oriental melon after harvest in order to extend storage life. Major active packaging technologies are concerned with a selectively gas permeable film related to respiration of produce and the packaging applications of ethylene removal, antimicrobial, and antifogging substances to keep the effective freshness of fruit.

• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.186-193
• /
• 2013

Potential of consumer unit packaging was investigated for quality maintenance during export simulation in king oyster mushrooms (Pleurotus eryngii). Mushrooms were harvested in late May, precooled to $4^{\circ}C$ within 6 hours, and then packaged for shipping in two ways: 2 kg bulk packaging in a polyethylene (PE) bag or three types of unit packaging methods such as 400 g in polypropylene film bag (PPB), 200 g on styrofoam tray + PE shrinkage film wrapping (STW), and 200 g in polyethylene terephthalate (PET) containers (PETC). For local distribution of bulk-packaged commodity, mushrooms were sorted again and packaged into 3 consumer units in the same way as for the initial shipping packages. Simulation of refrigerated container shipping was performed in a walk-in type pilot storage at $0.5^{\circ}C$ for 5 weeks, while local marketing simulation was carried out on the shelf at $7^{\circ}C$ for 7 days. During the shipment simulation, creation of modified atmosphere (MA) was substantial in 2 kg bulk packages with low $O_2$ below 2% and high $CO_2$ over 15% whereas, in PPB and PETC unit packages, relatively higher $O_2$ concentrations were observed. On the shelf at $7^{\circ}C$, $CO_2$ concentrations rapidly increased in PPB and PETC packages despite the short marketing period. Overall marketability evaluated by off-flavor, browning, and texture rating was maintained at excellent level when 2 kg bulk packaging in PE or unit packaging in PPB and PETC were used for shipment. In contrast, establishment of MA was very slight in STW packages during shipment and local distribution resulting in poor quality after export simulation. The results suggested that shipment using adequate consumer unit packaging is more practical and economically beneficial than using bulk packaging in the export program consisting of 5-week shipment and 7-day local distribution.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.4
• /
• pp.551-557
• /
• 2014

To improve microbiological quality of Aster scaber during storage and distribution, hurdle technology with the sanitizers and packaging methods was used. After blanching, total aerobic bacteria of Aster scaber treated with 20% ethanol and 10% NaCl were measured at 2 log CFU/g after 6 days. Total aerobic bacteria of blanched Aster scaber at $100^{\circ}C$ were measured at 2 log CFU/g, and the storage at $4^{\circ}C$ effectively inhibited the growth of bacteria. Repeated blanching using water with added NaCl at $80^{\circ}C$ showed similar microbial growth inhibition compared with treatment at $100^{\circ}C$. After vacuum packaging, blanched sample showed 2 log CFU/g of total aerobic bacteria during 10 days (the storage at $4^{\circ}C$). Therefore, repeated blanching using the water with added 10% NaCl improved the microbiological quality of Aster scaber. We also found that repeated blanching after vacuum packaging was an effective way for storage and distribution of Aster scaber. In conclusion, blanching two times in the 10% salt water or in vacuum packaging at $80{\sim}100^{\circ}C$ would be helpful to control the microbes during storage and distribution.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1685-1692
• /
• 2015

This study examines the mackerel distribution systems in Norway which has a leading mackerel industry, and has the purpose of analyzing the effects of structural improvements for the development of Korea's mackerel industry. The landing and distribution status of Korea and Norway's mackerel industry was compared, and the effects of structural improvements was analyzed under the assumption that a number of factors would be improved after an analysis of competitiveness. Special features of the landing and distribution systems of mackerel in Norway are Reduction of transportation costs and transportation time through E-auctions, fish Pumps, freshness management using state-of-the-art equipment and technology such as sea water cooling systems, direct landing at processing factories and Automation through fully automated sorting & packaging systems. The distribution competitiveness of Korea and Norway's mackerel industry was compared through the qualitative review of landing time and the length of distribution channel, distribution costs due to differences in trading method, quality and hygiene management and merchandising. For Korea's mackerel industry to have international competitiveness, they must have efficiency throughout the phases of landing, processing and distribution systems as observed in case of Norway.