• 한국항해항만학회지
• /
• 제39권4호
• /
• pp.285-291
• /
• 2015

해상 사고에 의한 익수자는 저체온증에 의한 사망 위험에 노출되어 있다. 구명 동의 등을 착용함으로써 부력은 유지할 수 있으나 해수의 낮은 온도에 의한 신체의 열손실은 짧은 시간 내에 체온을 하강시키고 그에 따른 저체온증 사망이 우려된다. 전통적인 구명 동의는 고체형 부력체를 사용하여 부력을 향상 시키고 있으나, 구명 동의에 공기를 채움으로써 부력 및 체온 보존 효과를 얻을 수 있을 것으로 판단된다. 본 연구는 고체형 충진재를 이용한 기존의 비 팽창형 구명 동의와 공기를 채운 팽창형 구명 동의의 단열 성능을 비교하고, 각각의 방법이 체온 변화에 미치는 영향을 정성적으로 평가하고자 한다. 먼저 열저항 모델을 이용한 대략적인 단열 성능의 비교를 실시하고, 유한요소법을 이용하여 Pennes의 신체 열전달 해석을 수행하여 시간에 따른 체온 변화를 수치적으로 검토하였다.

• 생명과학회지
• /
• 제25권3호
• /
• pp.263-268
• /
• 2015

체강 소체는 꼬마 선충에서 내화과정을 통해 체강 내 액체를 세포 안으로 들여오는 특이적인 세포이다. 본 연구실에서의 최근 연구 결과에 의하면, 꼬마 선충에서 식이제한에 의한 수명연장에 체강 소체가 필수적임이 발견되었다. 본 연구에서는 꼬마 선충에서 체강 소체를 제거하였을 경우, 환경적 스트레스에 대한 저항성과 번식력을 개체 수준에서 연구하였다. 체강 소체는 체강 소체에만 특이적으로 발현하는 디프테리아 독소를 이용하여 제거하였다. 먼저 자외선에 대한 저항성은 20 J/cm²/min의 자외선을 조사한 후, 생존률의 변화를 매일 기록하였다. 또한 꼬마 선충을 35℃ 배양기에 10시간 동안 배양하여 열 스트레스를 가한 후, 생존률의 변화를 관찰하였다. 산화성 스트레스는 paraquat를 이용하여 생체 내 산화성 스트레스를 유도한 다음, 산화성 스트레스에 대한 저항성을 비교하다. 번식력의 경우, 번식기간 동안의 총 자손의 수와 날짜 별 자손의 수를 비교 분석하였다. 그 결과, 체강소체는 개체의 자외선 스트레스의 저항성에는 필수적이지만, 열과 산화성 스트레스 저항성에는 영향을 미치진 않는 것으로 보인다. 그리고 개체의 번식력에도 관여하는 것으로 나타났다. 본 연구 결과는 노화 및 식이제한에 의한 수명연장의 기전을 이해하는데 기여할 것으로 사료된다.

• Korean Journal of Acupuncture
• /
• 제40권4호
• /
• pp.156-168
• /
• 2023

Objectives : This study aimed to determine the status of thermal stimulation devices approved in Korea for medical applications over the past 10 years, and based on this, to obtain insight for future thermal treatment in Korean medical institutions. Methods : We searched the item classification list entitled "Regulations on Medical Device Items and Rating by Item" from the Ministry of Food and Drug Safety Notice No. 2021-24, 2021 (Enforced March 19, 2021; www.mfds.go.kr) for individually licensed heaters using the terms "heat" and "heating". Results : We identified 17 items of thermal stimulation product group, of which 1,308 devices were licensed by February 4, 2022, and 53.2% of them (n=696) were devices with valid permits for distribution in Korea. Among the licensed devices, heating pad systems under/overlay (electric, home use) were approved the most, but combinational stimulator (for medical use, home use; Grade 2) accounted for the highest percentage among the current valid permission. Moxibustion apparatuses were licensed separately for electrical use and non-electrical use, and occupied a low percentage of the total devices. We analyzed 307 devices that were accompanied by technical documents and found that the heat sources were wires in 145 (47.2%), infrared rays in 44 (14.3%) and ultrasonic waves in 42 (13.7%) devices. Most (83.1%) devices were used for pain relief, while other applications included beauty, cancer treatment, maintenance of infant body temperature, and healing fractures. Conclusions : Thermal stimulation devices accounted for about 0.9% of all medical devices, and among them, combinational stimulators and heating pad systems under/overlay had the most valid permits. Thermal stimulation devices using heating wires and infrared rays were the most prevalent, and most were used to relieve pain. In order to develop a range of thermal stimulation devices that can be utilized in Korean medical institutions, it is imperative that they have potential applications beyond pain management, addressing various medical purposes. To achieve this, foundational research is necessary to effectively apply diverse heat sources based on medical objectives.

• 대한한방소아과학회지
• /
• 제30권2호
• /
• pp.1-9
• /
• 2016

Objectives Hataedock is a Korean herbal medical oral treatment that removes fetal toxic heat and meconium from new born babies. The purpose of this study is to evaluate whether Hataedock treatment of Duchi extracts has anti-inflammation effects on AD (Atopic Dermatitis)-induced NC/Nga mice. Methods After Hataedock treatment of Duchi extracts on days 0, 3-week-old NC/Nga mice were sensitized on days 28, 35, 42 by exposure of DNFB (dinitrochlorobenzene) and were induced to have AD. Immunohistochemistry of NF-${\kappa}B$ p65, iNOS, COX-2 and TUNEL assay of apoptotic body was used to identify changes of skin damages and anti-inflammation effects. Results The alleviate effect of the skin damage and angiogenesis was observed in DT group. The damage of stratum corneum, hyperplasia, edema, infiltration of lymphocytes and distribution of capillary were decreased in DT group. Also, the study results suggested that Hataedock treatment of Duchi extracts in DT group remarkably downregulated levels of NF-${\kappa}B$ p65 by 70% (p < 0.001), as well as COX-2 by 51%, iNOS by 62% (p < 0.001). Additionally, Hataedock treatment of Duchi extracts in DT group up-regulated apoptosis of inflammatory cells by 68% in atopic dermatitis-like skin lesion. Conclusions From the study results, we observed that Hataedock treatment of Duchi extracts alleviates AD through diminishing various inflammatory cytokines in the skin lesions, which are involved in the initial steps of AD development. It is anticipated to have potential applications for prevention and treatment of atopic dermatitis.

• 대한의료기공학회지
• /
• 제15권1호
• /
• pp.44-60
• /
• 2015

Objective : The purpose of this study is to investigate the effect of Su-Gi therapy for Bell's palsy by using DITI. Methods : We investigated 16 patients with Bell's palsy who had visited in the H Korean medicine hospital in Gyeonggi Province from December 27th, 2010 to April 8th, 2015. The Su-Gi therapy was done by 1 times daily. We evaluated the change of them by using Digital Infrared Thermographic Imaging and Yanagihara's unweighted grading system. Results : There aren't meaningful differences in values for the meridian points in pretest and posttest which were observed by DITI of abnormal side and normal side. There are meaningful differences in values, for abnormal side and normal side of the meridian points in pretest and posttest of DITI. It was of significance that pretest Y and average ΔT of each the meridian points in the type of hyperthermia but not in the type of hypothermia. In the Correlation analysis of values of pretest and posttest, chaotic aspects of body heat distribution in the pretest change as a relatively consistent aspects in the posttest. It wasn't of significance that Correlation Analysis of Ups and downs in temperature of TE17 and Recovery speed observed by ΔY. In simple regression analysis of posttest's Y-system values against absolute ΔT by subtracting ΔTE17 from ΔST6, we didn't predict in the pretest, but could predict significantly in the posttest(Regression coefficient : -2.11) In the regression analysis result of the meridian points' ||pretest ΔT|-|posttest ΔT||, 陽白(GB14) and 頰車(ST6) are of significance (Total R-Square=0.447). But we couldn't obtain final regression analysis model. Conclusions: These results suggest that Su-Gi therapy may be effective for Bell's palsy.

• 대한본초학회지
• /
• 제34권1호
• /
• pp.1-11
• /
• 2019

Objective : An allergy to peanuts is a major cause of fatal food-induced anaphylaxis, with food allergies becoming an increasingly important health research issue. Food allergy as clinical entity has been recongnized for many years, although there is yet no general concord as to the incidence of this symptom.1) Methods : This study was undertaken to verify the effect of seeds of Canavalia gladiata (Jacq.) DC. extract (CGE) on the inhibition of allergic reactions using a cholera toxin and peanut extract-immunized food allergy mouse model. We determine whether the changes in rectal temperature were related to energy consumption owing to heat production in the body. Mast cell distribution and degranulation in the dermis and epidermis were observed with an optical microscope. Subsequently, Ara h1 levels in serum and interleukin (IL)-4, IL-10, and $IFN-{\gamma}$ levels in cultured supernatants of splenocytes were measured. Results : CGE treatment significantly attenuated the secretion of the Ara h1 antibody in serum and splenocytes. Ara h 1 was undetected in the cholera toxin and peanut extract-immunized food allergy mouse model. Improvement in ear tissue inflammation symptoms was the CGE experimental group. In the control group and peanut extract control group, the expression of mast cells was higher, whereas that in the CGE experimental group was significantly lower. Conclusion : CGE causes suppression in a food allergy mouse model via the inhibition of Ara h1 secretion, and might be useful for developing functional health foods.

• Corrosion Science and Technology
• /
• 제15권3호
• /
• pp.120-124
• /
• 2016

The effect of alloying element Ca (0, 1, and 2 wt%) on corrosion resistance and bioactivity of the as-received and anodized surface of rolled plate AM60 alloys was investigated. A plasma electrolytic oxidation (PEO) was carried out to form anodic oxide film in $0.5mol\;dm^{-3}\;Na_3PO_4$ solution. The corrosion behavior was studied by polarization measurements while the in vitro bioactivity was tested by soaking the specimens in Simulated Body Fluid (1.5xSBF). Optical micrograph and elemental analysis of the substrate surfaces indicated that the number of intermetallic particles increased with Ca content in the alloys owing to the formation of a new phase $Al_2Ca$. The corrosion resistance of AM60 specimens improved only slightly by alloying with 2 wt% Ca which was attributed to the reticular distribution of $Al_2Ca$ phase existed in the alloy that might became barrier for corrosion propagation across grain boundaries. Corrosion resistance of the three alloys was significantly improved by coating the substrates with anodic oxide film formed by PEO. The film mainly composed of magnesium phosphate with thickness in the range $30-40{\mu}m$. The heat resistant phase of $Al_2Ca$ was believed to retard the plasma discharge during anodization and, hence, decreased the film thickness of Ca-containing alloys. The highest apatite forming ability in 1.5xSBF was observed for AM60-1Ca specimens (both substrate and anodized) that exhibited more degradation than the other two alloys as indicated by surface observation. The increase of surface roughness and the degree of supersaturation of 1.5xSBF due to dissolution of Mg ions from the substrate surface or the release of film compounds from the anodized surface are important factors to enhance deposition of Ca-P compound on the specimen surfaces.

• 대기
• /
• 제18권3호
• /
• pp.237-248
• /
• 2008

A thermal index which considers metabolic heat generation of human body is proposed for operational forecasting. The new thermal index, Perceived Temperature (PT), is forecasted using Weather Research and Forecasting (WRF) mesoscale model and validated. Forecasted PT shows the characteristics of diurnal variation and topographic and latitudinal effect. Statistical skill scores such as correlation, bias, and RMSE are employed for objective verification of PT and input meteorological variables which are used for calculating PT. Verification result indicates that the accuracy of air temperature and wind forecast is higher in the initial forecast time, while relative humidity is improved as the forecast time increases. The forecasted PT during 2007 summer is lower than PT calculated by observation data. The predicted PT has a minimum Root-Mean-Square-Error (RMSE) of $7-8^{\circ}C$ at 9-18 hour forecast. Spatial distribution of PT shows that it is overestimated in western region, while PT in middle-eastern region is underestimated due to strong wind and low temperature forecast. Underestimation of wind speed and overestimation of relative humidity have caused higher PT than observation in southern region. The predicted PT from the mesoscale model gives appropriate information as a thermal index forecast. This study suggests that forecasted PT is applicable to the prediction of health warning based on the relationship between PT and mortality.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1218-1230
• /
• 1994

In manufacturing process of porous glass-ceramics by the filler method, the sintering behaviour of crystallizable glass powder mixed with various salts was studied and also the effects of precipitated crystal phases on the properties of porous glass-ceramics were investigated. Fine-grained crystallizable glass powder was homogeneously mixed with various slat having grain size 100~200 ${\mu}{\textrm}{m}$ and sintered for densification. After washing out the inorganic salt with distilled water, the porous sintered body was heat treated additionly for crystallization. The MgO-Al2O3-SiO2 base glass was used as crystallizable glass powder and the water soluble salts such as K2SO4 and MgSO4 were used as filler. When K2SO4 was used, leucite crystal phase was formed as a result of the ion exchange and porous glass-ceramics which exhibit high temperature resistance and high thermal expansion coefficient of 17$\times$10-6/$^{\circ}C$ could be obtained. On the contrary, when MgSO4 was used, only slight ion exchange is observed and $\mu$-cordierite and $\alpha$-cordierite crystal phases were formed and porous glass-ceramics which exhibit low thermal expansion coefficient schedule were determined with the results of DTA curves, thermal shrinkage curves and XRD patterns analysis. From DTA curves and thermal shrinkage curves, it was found that the sintering densification have been completed at the temperature range of exothermic peak for crystallization. The pore size distributions and pore diameters were measured by mercury porosimeter. The pore diameter of porous glass-ceramics was 10~15 ${\mu}{\textrm}{m}$ when 100~200${\mu}{\textrm}{m}$ grain size of K2SO4 was used and it was 25~30 ${\mu}{\textrm}{m}$ when the same grain size of MgSO4 was used. The porous glass-ceramics K2SO4 used shows bimodal pore size distribution and its porous skeleton structure was ascertained by SEM observation.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1537-1546
• /
• 2017

Many thermal-hydraulic tests have been conducted at the Korea Atomic Energy Research Institute for verification of the SMART (System-integrated Modular Advanced ReacTor) design, the standard design approval of which was issued by the Korean regulatory body. In this paper, the contributions of these tests to the standard design approval of SMART are discussed. First, an integral effect test facility named VISTA-ITL (Experimental Verification by Integral Simulation of Transients and Accidents-Integral Test Loop) has been utilized to assess the TASS/SMR-S (Transient and Set-point Simulation/Small and Medium) safety analysis code and confirm its conservatism, to support standard design approval, and to construct a database for the SMART design optimization. In addition, many separate effect tests have been performed. The reactor internal flow test has been conducted using the SCOP (SMART COre flow distribution and Pressure drop test) facility to evaluate the reactor internal flow and pressure distributions. An ECC (Emergency Core Coolant) performance test has been carried out using the SWAT (SMART ECC Water Asymmetric Two-phase choking test) facility to evaluate the safety injection performance and to validate the thermal-hydraulic model used in the safety analysis code. The Freon CHF (Critical Heat Flux) test has been performed using the FTHEL (Freon Thermal Hydraulic Experimental Loop) facility to construct a database from the $5{\times}5$ rod bundle Freon CHF tests and to evaluate the DNBR (Departure from Nucleate Boiling Ratio) model in the safety analysis and core design codes. These test results were used for standard design approval of SMART to verify its design bases, design tools, and analysis methodology.