• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.582-590
• /
• 1994

전력선 통신을 위한 간단하면서 융통성이 큰 2-반송과 DS방식의 데이터 전송모뎀을 구현하고, 그 특성을 해석적으로 검토하였으며 실험을 통해 이것을 확인 하였다. 제안된 시스템은 DS모뎀 출력에 극성에 따라 독립된 2개의 반송파 주파수를 할당하여 전송케 하므로서 완전한 DSSS 동작을 보장 하도록 한다. 수신단말기의 두 포락선 검파출력은 재래방식 처리 비교기에 입력되지 않고 먼저 DS 상관기에 입력시켜서 그 출력을 잡음과 비교판정 하게 된다. 이때, 역확산되어 약화된 잡음전략이 신호와 비교되기 때문에 데이터의 에러율은 현저하게 개선 된다. 이 시스템은 구성이 비교적 간단함에도 불구하고, 2400bps의 데이터를 전송 할때, 재래식의 FSK 방식에 비하여 10dB정도 더 높은 선로잡음아래에서도 에러율 10 정도를 유지할 수가 있다.

• 한국통신학회논문지
• /
• 제19권8호
• /
• pp.1518-1527
• /
• 1994

본 논문에서는 배전선을 통하여 전송된 BPSK 신호를 마이크로프로세서를 이용하여 복조하는 알고리즘을 개발하고 구현하였다. 배전선 BPSK 복조를 마이크로프로세서를 실현하기 위해서는 무엇보다 배전선을 통하여 수신된 BPSK 신호를 2진 신호로 바꿔주어야 한다. 그러므로, 본 논문에서는 먼저 전송된 BPSK 신호를 2진 신호로 바꿔주는 하드웨어를 설계하였다. 그런 다음 반송파의 주파수가 피변조 2진 신호 주파수의 우수배이면 변조점이 피변조 2진 신호의 상승에지(rising edge)와 하강에지(falling edge)에서 각각 다른 방향으로 나타난다는 사실과 배전선으로부터 수신된 BPSK 신호를 여과하고, 증폭하고, 크리핑하고, 정형하는 과정을 조절하면 변조점에서의 2진 신호 길이가 다른 점에서의 2진 신호 길이의 2배로 된다는 것에 착안하여 배전선 BPSK 신호를 복조하는 알고리즘을 개발하고, 이 알고리즘에 의한 마이크로프로세서 복조시스템을 실제로 구현하였다. 구현된 이 복조시스템은 실제의 배전선 복조에서 비트오류율(bit error rate)이 0.02% 이하이었다.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.502-512
• /
• 2008

CFD tools were intensively used to develop a bulk carrier hull form of 180,000 DWT. HCAD and WAVIS were utilized to vary and evaluate the hull forms. LCB and framelines were systematically changed starting from a mothership. Resistance characteristics have been assessed by evaluating the wave-pattern resistance and viscous pressure drag along with the wave profile and wake distribution. It was found that the hull forms obtained from LCB variations were not good enough to satisfy the target resistance coefficient because of large wave generation at the design speed. After choosing the appropriate one from the LCB variation series, bow and stern framelines have been modified to improve wave-making characteristics and wake distribution, respectively. Model tests were performed to confirm the CFD results. Furthermore, the effect of free surface on CFD application was investigated, and a few comments are given on the difference between WAVIS version 1.4 and 2.0.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2767-2769
• /
• 2002

최근 전력선통신은 디지털 변복조 기술의 발달에 힘입어 새로이 부각되었다. 대부분의 전력선 통신 기술은 Home Network을 대상으로 하는 저압 220V상의 전력선 통신기술이다. 본 논문에서는 고압 배전 계통에서의 전력자동화 통신망으로 이용될 수 있는 전력선 통신망을 소개하고 그 설계에 대하여 다루었다. 배전 계통은 수십 km에 걸쳐서 제어 노드들이 분포해 있으므로, 설계된 통신망은 고압 가공지선 상에서 동작하는 수십km 정도의 통신망 길이와 수 만개의 노드들을 수용할 수 있도록 하였다. 이를 위하여 고압 커플러, 디지털 변복조부 및 통신 프로토콜을 설계하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2540-2542
• /
• 2002

In recent years, it is a worldwide trend that many power utilities focus their attention to employ up-to-date communication technology to the automation of their power plants and distribution systems. Automation Systems in Korea was installed using twisted pair cable(TPC), power line carrier(PLC), coaxial cable(CA), wireless network(wireless data, TRS and PCS). Among the communication media only Satellite Communication guarantees the reliable communication in case of emergency such as a flood, a heavy snow and an earthquake. It can integrate two-way satellite systems to existent nationwide SCADA controlling points of electric power transmission & distribution system that enables real time remote monitoring and controlling automatically. This paper presents some of design efforts for the satellite communication network as the media of Automation Systems.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1383-1389
• /
• 2013

There were telecommunication noise and malfunctions of the electronic devices occurred over a wide area due to the high harmonic voltage and/or current levels of the Back-to-back converter in the DFIG wind power system even though the magnitude of all harmonics is within the international standards. The triangular carrier signals of the PWM used in the power converter system is related to the telecommunication noise because they are in the range of audible frequencies and amplified by a variety of the standing waves that were excited by harmonic voltage sources in the weak grid system such as a long distance distribution transmission lines. This paper describes the characteristics of the harmonics in the wind turbine-generator, numerical analysis and simulation of the harmonics resonance phenomena in the distribution lines as well as measuring induced voltage of the telecommunication lines in parallel with power lines in order to verify the root cause of the telecommunication noise. These noise problems can occur in a wind turbine power system with a non-linear converter at any time, as well as photovoltaic power system. So, the preliminary review of suitable filter devices and switching frequencies of the PWM have to be required by considering the stability of the controller at the design stage but as part of the measures the effect of the telecommunication cable shields was analyzed by comparing the measured data between multi-conductor with/without shields so as to attenuate the sources of the harmonics voltage induced into the telecommunication lines and to apply the most cost-effective measures in the field.

• 약학회지
• /
• 제47권4호
• /
• pp.224-229
• /
• 2003

We have investigated the transport characteristics of synthetic antioxidant and free radical scavenger, $\alpha$-phenyl-n-tert-butyl nitrone (PBN) at the blood-brain barrier (BBB) by in vitro uptake study in conditionally immortalized rat brain capillary endothelial cell line (TR-BBB). Also, the efflux of PBN from brain to blood is estimated using the brain efflux index (BEI) method. Choline is a charged organic cation, including nitrogen-methyl group and shows the carrier-mediated distribution to the brain. [$^3$H]Choline uptake by TR-BBB cells was significantly inhibited by PBN with $IC_{50}$/ of 1.2 mM, which appears to be due to similar structures between choline and PBN. And, PBN was microinjected into Par2 of the rat brain by BEI method, and was eliminated from the brain with an apparent elimination half-life of about 2 min. Also, [$^3$H]choline efflux was significantly inhibited by PBN using BEI method. In conclusion, the efflux transport of PBN takes place across the BBB and PBN may be transported into the brain and eliminated from the brain by BBB choline transporter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.205-207
• /
• 2000

본 논문에서는 전력선을 통신 매체로 한전력선 통신시 전력선상에 항시 존재하는 전원 주파수의 고조파와 부하로 인한 고조파 부하 투입시 발생하는 임펄스형 잡음이 통신신호에 미치는 영향과 그 특징을 조사하였다. 통신 신호에 미치는 영향을 측정하기 위하여 모의 실험을 위한 별도의 전력선을 설치하였다. 또한 실제 전력선 통신을 재현하기 위하여 HTH사와 Intelogis사의 전력선 모뎀을 사용하였으며, 고조파 성분과 임펄스형 잡음의 실현을 위하여 인버터, 고조파 발생장치, 스위칭 부하를 설계하여 사용하였다.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.361-369
• /
• 2008

The optimized distance between skegs and angle of the skeg for a standard twin-skeg type LNG carrier were presented using the CFD and model tests. The evaluation method of self-propulsion performance was derived based on the results of CFD and confirmed the validity through model tests. The analyses to assess self-propulsion performance using CFD were shown by flow line patterns on the skeg surface, nominal wake distribution in the propeller plane and the evaluation for flow balance around stern skegs. The optimized ship that was applied to the optimized two design parameters in stern skeg arrangement for target ship was derived in this work. Finally speed performance of mother ship which is existing ship and optimized ship were compared through CFD and model tests. And the usefulness about the evaluation method of self-propulsion performance was reconfirmed.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.567-577
• /
• 2012

This paper introduces a new scheme to balance the DC bus voltages of a cascaded H-bridge converter which is used as a Distribution Static Synchronous Series Compensator (D-SSSC) in electrical distribution network. The aim of D-SSSC is to control the power flow between two feeders from different substations. As a result of different cell losses and capacitors tolerance the cells DC bus voltage can deviate from their reference values. In the proposed scheme, by individually modifying the reference PWM signal for each cell, an effective balancing procedure is derived. The new balancing procedure needs only the line current sign and is independent of the main control strategy, which controls the total DC bus voltages of cascaded H-bridge. The effect of modulation index variation on the capacitor voltage is analytically derived for the proposed strategy. The proposed method takes advantages of phase shift carrier based modulation and can be applied for a cascaded H-bridge with any number of cells. Also the system is immune to loss of one cell and the presented procedure can keep balancing between the remaining cells. Simulation studies and experimental results validate the effectiveness of the proposed method in the balancing of DC bus voltages.