• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.326-327
• /
• 2008

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2007.10a
• /
• pp.546-547
• /
• 2007

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.559-562
• /
• 2017

In city, tracing of power transmission lines is difficult due to compound installation of overhead and underground lines, transposition, bad view caused by trees or big buildings. It is hard problem for electrical technician on site to trace power transformers or power lines to serve customers in 3 phase -4 wires power distribution systems. It is necessary that the correct and fast tracing method is required for load balancing among distribution lines. Old technology use to trace off-lines with high power impulse injection. Our proposed method use to trace live lines with very small power high frequency signal injection. Typical power transformers in the distribution system prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the power transformer to serve customers. Two end communication terminals are required to be synchronized between them for determination on electrically same phases. Challenging issue is to achieve synchronization without GPS providing synchronizing time. A novel power transformer and wire identification system is designed and implemented. The system consists of a transmitter and a receiver with power-line communication module. Some experiments are conducted to verify the theoretical concepts in a big commercial building. Also some simulations are done to help and understand the concepts by using MATLAB Simulink simulator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.505-508
• /
• 2016

In city, tracing of power transmission lines is difficult due to compound installation of overhead and underground lines, transposition, bad view caused by trees or big buildings. It is hard problem for electrical technician on site to trace power transformers or power lines to serve customers in 3 phase -4 wires power distribution systems. It is necessary that the correct and fast tracing method is required for load balancing among distribution lines. Old technology use to trace lines with high power impulse injection. Our proposed method uses to trace lines with very small power high frequency signal injection. Simulation models for 3-phase power transformers, 3-phase wire lines, and customer loads are described to investigate the transmission characteristics of high frequency power line carrier. Distribution lines have only a limited ability to carry higher frequencies. Typically power transformers in the distribution system prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the power transformer to serve customers. The system consists of a transmitter and a receiver with power-line communication module. Some experiments are conducted to verify the theoretical concepts in a big commercial building. Also some simulations are done to help and understand the concepts by using MATLAB Simulink simulator.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.1
• /
• pp.20-28
• /
• 1992

The x-ray fluorescence(XRF) is one of the most convenient and widely used techniques for analyzing trace elements in ambient particulate matters. The objects of the study were to estimate the optimum exposure time using the XRF, to investigate the distributions of heavy metal levels in particulate matters, and finally to study seasonal variation for the concentrations of total suspended particulate matters(TSP) and size fractionated particulate matters. The suspended particulate matters had been collected by a cascade impactor having 9 size fragnated stages for 3 years(Dec. 1988 to Nov. 1991) in Kyung Hee University-Suwon Campus. The particulate matters were then collected on each stage by membrane filters. The weight concentrations were determined by the XRF system. Thus, seasonal variations and relationship between concentration and particle size could be investigated. Resulting distribution was bimodal with the coarse and the fine particle groups minimum occurring around 2.1 to 3.3 $\mu$m as an aerodynamic diameter. To determine optimum exposure time of the XRF for various trace inorganic elements, membrane filters and the NIST standard filters were extensively studied. Using a statistical technique, optimum exposure time was estimated for each trace element and overall elements. The time was then determined as 20 seconds for the XRF system. The concentration of TSP was 123.9$\mum/m^3$ on an arithmatic average. The levels of each inorganic metal were Si 2420.0ng/$m^3$, Fe 977.1ng/$m^3$, and so on. The Pb. Zn, and Cu abounded in the fine mode group, while Ca, Fe, Si, Al, and K in the coarse group. Marked seasonal variation of TSP and metal concentrations was observed. The concentration of heavy metals in the fine mode was highest in winter : on the other hand, that in the coarse mode was highest in spring.

• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.241-249
• /
• 2005

In this study, instrumental neutron activation analysis was used to measure the concentrations of about 30 trace elements in airborne particulate (PM2.5) samples at urban area of Daejeon city located in the southwestern region of Korea. An inspection of the measurement data indicates that the distribution patterns of trace elements could clearly distinguish the elements with their concentrations ranging over five orders of magnitude. The mean values for Lu and Dy were found to be the lowest at values of 0.01 and $0.04ng/m^3$, while those for K and Fe showed the highest value of 671 and $653ng/m^3$, respectively. The results of correlation analysis showed that PM2.5 concentrations can exhibit much more enhanced correlations with the elements of earth crustal components. The results of factor analysis further indicated that there are no more than six factors with statistical significance, which may exert dominant roles in regulating the elemental concentration levels in the study area. Enrichment factor analysis supports explicit interpretation of results found by this factor analysis.

• Korean Journal of Materials Research
• /
• v.26 no.6
• /
• pp.306-310
• /
• 2016

To produce 4N grade high-purity silica powder from natural ore, the mineralogical characteristics of natural silica ore were investigated and their effects on the purification process were revealed. The Chinese silica mineral ore used was composed of iron and aluminum as main impurities and calcium, magnesium, potassium, sodium, and titanium as trace impurities; these trace impurities generally exist as either single oxides or complex oxides. It was confirmed that liberation and acidic washing of the impurities were highly dependent on the particle size of the ground silica ore and on its mineralogical characteristics such as the distribution and phases of existing impurities. It is suggested that appropriate size reduction of silica ore should be realized for optimized purification according to the origin of the natural silica ore. A single step purification process, the mechano-chemical washing (MCW) process, was proposed and verified in comparison with the conventional multi step washing process.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.391-398
• /
• 2002

Trace organic contaminants in deep-sea sediments near Dokdo were analyzed. Total PAMs concentration ranged 14.8-314 ng/g dry weight and high molecular weight PAHs were dominant. The highest PAHs concentration was detected at A19 which located at Ulleung Basin. Most of organochlorines were under detection limit. Among the detected organochlorines, DDT compounds were dominant and followed by HCHs and HCB. Butyltin compounds and most of organophosphorus pesticides were not detected. Vertical distribution of PAHs showed typical sub-surface maximum and decreasing trends depending on depth. The highest PAHs concentration reached 454ng/g. Some organochlorines, DDT, HCH was detected and also showed decreasing trends. Other target organic pollutants were not detected in core sediments. Abnormally high level of PAHs concentration in A19 was discussed and the input sources were inferred to be the transport of sludge derived pollutant dumped at dumping site 'Byung' by deep current.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.113.2-113.2
• /
• 2014

Methanol masers are divided into two classes, I and II. Class II methanol masers trace the disk-outflow systems of massive young stellar objects (YSOs), while class I methanol masers appear to trace the interaction regions of outflows with the ambient molecular gas. Class II masers have been extensively studied by single dishes, connected arrays, and VLBIs. Meanwhile, class I masers have been much less studied. They have not been detected by any VLBI facility. Thus they have been believed to have more extended structures than class II masers. We made fringe surveys of 44GHz class I methanol maser emission towards more than 150 massive YSOs with flux densities >10 Jy using the Korean VLBI Network (KVN), and detected fringes in ~10% of the sources. We performed follow-up imaging observations of the detected maser sources with KVN and KVN+VERA (KaVA). The observations aim to investigate the distribution and kinematics of 44GHz methanol maser features in each source at milli-arcsecond resolutions, and to understand what they trace. In this talk we will present the fringe survey and imaging results and our plans for further studies. Additionally, we will also introduce the preliminary results of single-dish polarization observations of water and class I methanol masers.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.6
• /
• pp.465-474
• /
• 2002

In order to reflect variability due to exposure factors as well as to assess uncertainty associated with cancer risk posed by airborne trace metals, a Monte Calro analysis has been made in this study. Input parameters for Monte Carlo analysis were developed or adjusted using body weight, lifetime, and exposure frequency of Koreans. Ambient distributions of toxic metals were founded to be lognormal distributions for most of them using goodness-of-fit tests. Thus, the 95% UCL and 95% LCL of carcinogenic metals were estimated by H-statistic method for lognormal distribution, respectively. The results of Monte Carlo analysis of 95% UCL showed that the 95th percentile risks for men and women were 1.2 and 1.1 times higher than an acceptable risk of 10$^{-5}$ , respectively. The probabilities which those risks exceed the acceptable risk were estimated to be 8% and 6%, respectively, while to be 95% and 94%, respectively on the basis of the minimum acceptable risk of 10$^{-6}$ , respectively. Approximately 90% of total cancer risk came from human carcinogens such as arsenic and hexavalent chromium. Therefore, it is necessary to properly manage both arsenic and hexavalent chromium emissions in the study area.