• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1309-1316
• /
• 2017

As penetration level of Distributed Generations (DGs) on weak distribution networks gets higher, voltage rise problem can often occur due to reverse power which is not expected in conventional distribution networks. It, however, cannot be effectively solved by using conventional voltage regulating devices such as On-Load Tap Changers (OLTCs), Step Voltage Regulators (SVRs) because those do not consider the presence of DGs when determining relevant setting parameter for voltage regulation. This paper presents a scheme for voltage regulation using coordinated control between OLTC and DGs which can actively participate in the regulation. The scheme decides which device should be operated first based on the characteristics of regulating devices, in order to prevent unnecessary operation of output changes of DG and excessive tap changing operation of OLTC. Computer simulations considering daily irradiation of PV and load curve are performed by using MATLAB Simulink and performance comparison between the presented scheme and conventional ones is also made. It can be concluded from simulation results that the scheme presented is very effective to regulate voltages in distribution networks with multiple DGs.

• Journal of Distribution Science
• /
• v.11 no.4
• /
• pp.89-97
• /
• 2013

Purpose - The purpose of this study is to systematically review the background of the Korean distribution promotion policy and distribution adjustment policies along with related regulations and policies. Research design, data, and methodology - Domestic distribution policy and relevant laws were examined through a review of existing research literature. The results of the development process of the domestic distribution policy, promotion policies, and adjustment policies are summarized below. Results - The results are summarized as follows. First, the purpose of the development of the domestic distribution promotion policy was to strengthen the competitiveness of the small and medium business industry through structural advancement of the small and medium industry. By expanding the managerial base for the small and medium industry, a new balance could be created in the national economy. There was a requirement for an early assistance policy for small and medium businesses as a base of these businesses in the distribution industry developed from their original model of catering to a traditional market of retail shops. Since 1996, there was a need for this early assistance policy due to the expansion and rapid growth of large scale stores causing a change in the consumption pattern for distribution markets and the decline of large enterprises. Second, the government supports small and medium business distribution through distribution promotion policies by supporting an organization promoting small business and supporting innovation in the distribution system. Third, in 1961 a business mediation system was established to protect small and medium industries. The Small and Medium Business Administration advises conglomerates to postpone acquisitions, restrain expansion of the business, or to reduce business scale if small businesses undergo an adverse effect such as decreasing demand because large companies are expanding into their areas. Fourth, the Distribution Adjustment Policy managed large-scale store regulation as follows: ① limitation on construction by urban planning ordinance, ② limitation on location based on traffic impact assessments, ③ regulation based on business guidelines by chiefs of autonomous bodies, ④ regulation on mandatory holidays and limitation of business hours. This large-scale store regulation is a policy introduced by authority to increase competitiveness of small and medium business distribution by the government. Conclusions - As discussed in this study, the distribution promotion policy and distribution adjustment policy are government distribution policies focused on the protection of the small and medium distribution businesses. This study is timely, since it was planned when the strengthening of the revisions of the Distribution Industry Development Act, aimed to protect small and medium retailers and merchants, was under discussion. The significance of this study is that it offers insights for the development of new policies in the future and an opportunity to consider the background of the distribution policy by the government.

• Journal of Power System Engineering
• /
• v.21 no.6
• /
• pp.68-78
• /
• 2017

Major countries have tighten their NOx regulation of diesel passenger cars. In the case of the EU, the regulation has been toughen up to 6.25 times since 2000. Despite the regulation the NOx concentration of the ambient has not been reduced proportionally. Futhermore, some manufacturers were disclosed using a defeat device for meeting the regulation illegally. As these issues, to reduce NOx emission practically, Korea and the EU introduced the real-world driving emission(RDE) regulation and the test method that will be applied after 2017. Also, the US has used the test equipment(PEMS) to detect a defeat device. In this paper, for the regulation to make a soft landing in Korea, 4 diesel passenger cars which met Euro 6a~6b regulation and were equipped with LNT/SCR were tested at a chassis dynamometer with environmental chamber applying the off-cycles(FTP, US06, SC03, HWFET and CADC) and several ambient condition(-7 and $14^{\circ}C$) as well as certification mode(NEDC, WLTC@ $23^{\circ}C$). The result of the test showed that the ambient temp. and the engine load as a test mode impacted the NOx emission of the cars while the vehicles with SCR emitted NOx lower than with LNT. Additionally, to propose an effective RDE test method, the above result was compared with the results of the other papers which tested RDE using the same cars.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.115-117
• /
• 2002

In general, it is supposed that load characteristics of high and low voltage distribution line are always coincidence. But in practical distribution system, voltage variation characteristics of high and low voltage distribution line are not same. Then in this paper, we proposes a voltage regulation method considering load variation characteristics of high and low voltage distribution line in distribution system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.53-61
• /
• 2009

This paper presents the improved voltage regulation method in power distribution system with multiple PV systems. At present, Line Drop Compensator (LDC) method has been used as voltage regulation method of power distribution system, which regulates the voltage using Under Load Tap Changer (ULTC), regarding the power flow of distribution system as one way. However, the method may be not able to regulate the voltage in a permissible range when the power flow is two ways. Thus, in this paper, we present the improved voltage regulation method of power distribution system using the voltage data of the point connected PV systems.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.146-152
• /
• 2001

Two control techniques - PI and LQR(Linear Quadratic Regulator) - of DSTATCOM (Distribution Static Synchronous Compensator) for line voltage regulation in distribution system are presented. It is shown that the voltage waveform is improved if the proposed methods are applied in IEEE 13 radial distribution system using PSCAD/EMTDC package in case of single line-to-ground fault. The three cases - without control, with PI control and with LQR control - are compared. The LQR control is shown to be best in respect of response profile and control effort required among them.

• Journal of Hydrogen and New Energy
• /
• v.20 no.2
• /
• pp.133-141
• /
• 2009

본 논문에서는 전기자동차의 고전압 시스템의 안전성을 확보하기 위한 법규 규제안 생성 방법론을 제시하였다. 법규가 기술적으로 모든 영역을 빠뜨리지 않고 정의하고 있는지를 파악하기 위한 방법으로 법규분포분석법(Regulation Distribution Analysis Method)과 법규 완전도 분석법(Regulation Completeness Analysis Method)을 제시하였다. 자동차 설계와 생산에 있어서 법규/규제는 중요한 이슈가 되고 있다. 원칙적으로 법규는 자동차 승객과 환경을 보호하는 목적으로 생성되고, 이윤 추구 중심의 시장에서 놓칠 수 있는 기술적 항목들을 규제할 수 있도록 한다. 매연 배출 정도, 매연 모니터링 시스템, 전기 안전성과 같은 항목이 그 예이며, 향후 연료전기자동차 양산을 앞두고는 고전압 안전성과 관련된 규제 또한 필요하게 될 것으로 파악된다. 그러나 규제 항목에서 미정의된 부분이 있는지를 확인하는 체계적인 방법이 없어 본 논문에서는 기술적인 파라미터를 중심으로 규제항목을 검토하는 방법론을 제시하였다.

• Journal of Distribution Science
• /
• v.11 no.9
• /
• pp.43-49
• /
• 2013

Purpose - The competitiveness of small- and medium-sized distribution companies has weakened with the entry of large distribution companies and Super Super Markets (SSMs). These companies have nationwide distribution networks and capital to take over street markets, thereby threatening the very survival of small merchants. In order to help these small- and medium-sized merchants, the government has recently reinforced distribution regulations for large distribution companies. Research design, data, methodology - The purpose of this study is to review domestic and foreign distribution regulations and to provide direction for establishing domestic distribution policies in the future. Results - The government must fully reassess its assistance policy for small and medium distribution companies to enable them to engage in differentiated competition with large retailers, based on their own strengths. This will allow all interested parties to coexist. Conclusions - Government assistance policies for small and medium distributors such as traditional markets must be reorganized. The objective is to ultimately protect small and medium distributors and allow them to coexist on their own strengths, rather than have regulations for large retail stores.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.77-83
• /
• 2014

As the interest on the air pollution is gradually risen up at home and abroad, their vehicle emission regulations have been reinforcing by steps. PM regulation was also reinforced 4times for the last 13years and has been applied to SI vehicles after EURO 5. Additionally, knowing that small particles of PM can easily penetrate deep into lungs PM number was added on the regulation from EURO5+ and is applied to CI vehicles. Also, PN regulation is going to be applied to SI vehicles. But, because the regulation is appled to only a general test mode of each countries that is performed at $25{\pm}5^{\circ}C$, it is unclear whether the regulation can work on the other ambient temperature conditions or not. In this paper, to know that exhaust emission characteristics at the special conditions CI vehicles(CRDi w, w/o DPF) were tested using 5-cycle mode, NEDC mode at 5-ambient temperatures (35, 25, 0, -7 and -15) and the exhaust emission test results were discussed. The results show that the vehicle with DPF emits much low PM(and PM number) on all of the test mode. However, NOx of the other mode was emitted higher than regulation mode. Also. NOx was sharply increased according to decreasing Ambient Temperature.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.2
• /
• pp.93-101
• /
• 2002

This paper describes a new method for determining the permissible operating range of DG(Distributed Generation) when DG is introduced into power distribution systems of which the voltage is controlled by LDC(Line Drop Compensator). Much of the DG installed during the next millennium will be accomplished through the reconstruction of the electric power industry. But in that case, it is difficult to properly maintain the terminal voltage of low voltage customers by using only LDC. This paper presents a method for determining the permissible operating range of DG for proper voltage regulation of power distribution systems with LDC. Proposed method has been applied to a 22.9 kV model and practical distribution systems, and its result is almost identical with the simulation result.