• 제목/요약/키워드: Distribution Patterns

검색결과 2,831건 처리시간 0.03초

ILAS와 ILAS-II 자료에서 나타난 남극 와동 붕괴기간의 미량기체 분포변화 (Variation of Tracer Distribution During the Antarctic Polar Vortex Breakup Shown in ILAS and ILAS-II Data)

  • 최우갑;임경수
    • 대기
    • /
    • 제20권3호
    • /
    • pp.367-377
    • /
    • 2010
  • Variation of tracer distribution during the vortex-breakup period in the Antarctic region was observed by the data from the Improved Limb Atmospheric Spectrometer (ILAS) and ILAS-II. All four trace species including methane, nitrous oxide, ozone, and water vapor show similar patterns of vertical gradient in spite of different structures of zonal mean mixing ratio. Timings of vortex breakup on each level are estimated by two different methods, and they are compared with zonal standard deviations following the latitude circle of each trace species. Although the tracers have different chemical life times and sink/source, the zonal standard deviation patterns show remarkable similarities. The zonal standard deviation shown here to measure the zonal asymmetry of tracer distribution is believed to diagnose the timing of the Antarctic polar-vortex breakup reasonably well.

열진공성형에서 발생하는 필름의 두께 분포와 패턴 변형에 관한 연구 (A study on the thickness distribution and pattern deformation of films in vacuum-assisted thermoforming)

  • 성겸손;이호상
    • Design & Manufacturing
    • /
    • 제12권2호
    • /
    • pp.5-10
    • /
    • 2018
  • Vacuum-assisted thermoforming is one of the critical steps for successful application of film insert molding(FIM) to parts of complex shape. In this study, the simulations and experiments of thermoforming processes were performed to investigate the effects of process conditions on thickness distribution and printed pattern deformation of films in vacuum-assisted thermoforming. The film thickness uniformity increased with decreasing film heating time, whereas it increased with increasing vacuum delay time. After thermoforming of films with uniform pattern space of 5mm, the maximum space was 9.432mm. Based on the simulation, a modified pattern was calculated to obtain uniform spaces after thermoforming. In the experiments for film with the modified pattern, the maximum space appeared 5.837mm. In, addition. the predicted patterns were in good agreement with the experimental results.

인구밀도의 변화로 본 도시내부의 성장과 공간패턴 - 서울의 예 (Intra-Urban Growth and Spatial Patterns in variation of Poupulation Density-The case of Seoul-)

  • 이진환
    • 대한지리학회지
    • /
    • 제38권
    • /
    • pp.61-74
    • /
    • 1988
  • Changing patterns of population densities in urban centers are different between Western countries and non-Western countries. Although Seoul is located in a non-Western country, the result of this study shows that its pattern of population density falls into the category of Western cities. Through the examination of three population density gradient models, it is clear that no model can precisely explain the population distribution of Seoul over time. Some of the models partly indicate the actual population distrisbution. The Clark model is appropriate to denote population distribution in the center of Seoul at an early stage in development. The Sherratt model cannot adequately explain the population distribution of Seoul.

  • PDF

Measurements of Local Coercivity Distribution in Ferromagnetic Films Using Magneto-Optical Microscope Magnetometer (MOMM)

  • Choe, Sug-Bong;Shin, Sung-Chul
    • Journal of Magnetics
    • /
    • 제5권3호
    • /
    • pp.81-84
    • /
    • 2000
  • A magneto-optical microscope magnetometer (MOMM) has been developed to simultaneously measure 2-dimensional array hysteresis loops of each local area of $320\times320-nm^2$ spots on ferromagnetic films, in addition to grabbing time-resolved domain evolution patterns. Using the system, spatial distribution of local coercivity can be quantitatively generated and then, compared directly with domain patterns grabbed at precisely the same position of a sample. It is clearly demonstrated that local coercivity distribution governs domain reversal behavior via a thermally activated relaxation process.

  • PDF

스테이션 분포형태가 DMSA 프로토콜의 성능에 미치는 효과에 대한 시뮬레이션 연구 (A Simulation Study on the Effects of Station Distribution Patterns to the Performance of DMSA Protocol)

  • 주기호
    • 공학논문집
    • /
    • 제2권1호
    • /
    • pp.95-102
    • /
    • 1997
  • 본 논문은 랜덤 억세스 LAN 프로토콜인 DMSA 시스템에서 스테이션 분포형태의 효과에 대하여 분석한다. 몬테카를로 시뮬레이션기법을 이용하여 몇가지 스테이션 분포 형태에 대하여 각 스테이션의 utilization을 평가한다. 또한, 스테이션의 숫자가 시스템의 utilization-delay 성능에 미치는 효과를 분석한다.

  • PDF

Distribution of Suspended Particulate Matters in the East China Sea, Southern Yellow Sea and South Sea of Korea During the Winter Season

  • Choi, Jin-Yong;Kim, Seok-Yun;Kang, Hyo-Jin
    • Journal of the korean society of oceanography
    • /
    • 제39권4호
    • /
    • pp.212-221
    • /
    • 2004
  • Concentrations of suspended particulate matters (SPM) and their distribution patterns were monitored three times in the East China Sea during the winter season in 1998 and 1999. SPM concentrations showed significant temporal variations controlled by the atmospheric conditions and sea states. In coastal area, SPM values were about 10-20 mg/l in fair weather conditions, but exceeded 100mg/l during the storm periods. Turbid waters were distributed widespread in the continental shelf of the East China Sea and the coastal area of the Korean Peninsula, and these two areas were connected along a NE-SW direction. The distribution patterns of turbid waters were interpreted as representing the transport behavior of suspended matter. Although the primary source of inner shelf mud deposits of Korea seems to be the Korean Peninsula, contribution from the East China Sea to the coastal area of Korea increases especially during the winter season.

옥천계(沃川系) 함(含)우라늄 탄질암중(炭質岩中)의 우라늄의 존재상태(存在狀態)와 광물종(鑛物種) (Uranium Distribution Patterns and U-mineral in the U-bearing Coaly Slate of Ogcheon System)

  • 이민성;김상욱
    • 자원환경지질
    • /
    • 제18권2호
    • /
    • pp.135-138
    • /
    • 1985
  • The radioautographing of U-bearing cloaly slate samples were initiated in order to clarify the uranium distribution patterns in the samples of Ogcheon system. Moreover, x-ray powder diffraction and x-ray single crystal analysis studies were undertaken to identify the uranium mineral which was extracted from U-bearing coaly slate. The handspecimens were collected from the Boseong mine, located in Deokpyeong area, Goesan-gun, Chungcheongbug-do. According to the experimental studies, it has been found the following facts: (1) fixed carbon has close relation with uranium contents, (2) quartz veins developed in U-bearing coaly slate are diveded into two groups based on mode of occurrence, formation stage and uranium distribution pattern; early quartz vein ($QV_1$) with low uranium concentration and late quartz vein ($QV_2$) with high uranium concentration, (3) matrixes around $QV_1$ are displayed homogeneous and high uranium concentration, while matrixes around $QV_2$ are low uranium concentration, (4) uranium mineral is identified as a variety of autunite.

  • PDF

Spatial and temporal distribution of driving rain on a low-rise building

  • Blocken, Bert;Carmeliet, Jan
    • Wind and Structures
    • /
    • 제5권5호
    • /
    • pp.441-462
    • /
    • 2002
  • This paper presents a practical numerical method to determine both the spatial and temporal distribution of driving rain on buildings. It is based on an existing numerical simulation technique and uses the building geometry and climatic data at the building site as input. The method is applied to determine the 3D spatial and temporal distribution of wind-driven rain on the facade a low-rise building of complex geometry. Distinct wetting patterns are found. The important causes giving rise to these particular patterns are identified : (1) sweeping of raindrops towards vertical building edges, (2) sweeping of raindrops towards top edges, (3) shelter effect by various roof overhang configurations. The comparison of the numerical results with full-scale measurements in both space and time for a number of on site recorded rain events shows the numerical method to yield accurate results.

Thermal post-buckling of graphene platelet reinforced metal foams doubly curved shells with geometric imperfection

  • Jia-Qin Xu;Gui-Lin She
    • Structural Engineering and Mechanics
    • /
    • 제87권1호
    • /
    • pp.85-94
    • /
    • 2023
  • In the present work, thermal buckling and post-buckling behaviors of imperfect graphene platelet reinforced metal foams (GPRMFs) doubly curved shells are examined. Material properties of GPRMFs doubly curved shells are presumed to be the function of the thickness. Reddy' shell theory incorporating geometric nonlinearity is utilized to derive the governing equations. Various types of the graphene platelets (GPLs) distribution patterns and doubly curved shell types are taken into account. The nonlinear equations are discretized for the case of simply supported boundary conditions. The thermal post-buckling response are presented to analyze the effects of GPLs distribution patterns, initial geometric imperfection, GPLs weight fraction, porosity coefficient, porosity distribution forms, doubly curved shell types. The results show that these factors have significant effects on the thermal post-buckling problems.

통관거점을 이용한 국제물류의 공간적 분포 패턴 (Spatial Distribution Patterns of International Physical Distribution through Clearance Depot)

  • 한주성
    • 한국경제지리학회지
    • /
    • 제9권2호
    • /
    • pp.225-242
    • /
    • 2006
  • 본 연구는 내륙세관인 청주세관에서 통관이 이루어진 지역을 대상으로 국제무역의 배후지와 관문, 지향지의 관계를 상호작용형 속성행렬 4차원의 행렬체를 2차원화 시켜 주성분분석을 하여 국제무역의 공간적 분포 패턴을 파악하였는데, 그 결과는 다음과 같다. 배후지-관문-지향지의 지역결합에 의한 주요 공간적 패턴은 수출의 경우 10개, 수입의 경우 9개로 나타났다. 청주세관 통관지역에서의 주요 수출입상품의 구성은 대체로 유사하지만 '정밀기계 제품', '비금속광물'은 수출에서, '광물성 제품', '기계류 및 전자제품'은 수입에서 주로 이루어지는 점이 다르다. 또 관문은 수출입 모두 유사하지만 수입의 경우 인천공항의 이용이 더 많고 청주공항을 이용하는 상품도 있어 지역공항의 이용도를 높이고 있다. 그리고 충북 이외의 지역에서의 수입의 지향지가 두드러지게 나타난다.

  • PDF