• 신재생에너지
• /
• 제1권2호
• /
• pp.41-52
• /
• 2005

The effects of internal manifold designs on the reactants feed-stream in Polymer Electrolyte Fuel Cells [PEFCs] is studied to figure out flow and thermal distribution patterns over an entire fuel cell stack. Reactants flows are modeled either laminar of turbulent depending on regions and the open channels in the bipolar plates are simulated by porous media where permeability should be pre-deter-mined for computational analysis. In this work, numerical models for reactants feed-stream In the PEFC manifolds are classified Into two major flow patterns: Z-shape and U-shape. Several types of manifold geometries are analyzed to find the optimal manifold configurations. The effect of heat generation in PEFC on the flow distribution is also Investigated applying a simplified heat transfer model in the stack level (i.e. multi-cell electrochemical power-generation unit). This modeling technique Is well suited for many large scale problems and this scheme can be used not only to account for the manifold flow pattern but also to obtain Information on the optimal design and operation of PEFC systems.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.837-844
• /
• 2003

The exhaust gas flow in the inlet collector of close coupled catalyst(CCC) adapted to the exhaust manifold is very complex flow because the exhaust gas is a pulsation flow with several port flow. The distribution of gas flow and temperature in inlet collector effect to the efficiency of catalytic converter. In this study, it measures temperatures on several point in inlet collector with two kind of inlet collector volume. And it analyzes with CFD to exhaust manifold and close coupled catalyst for temperature and flow. Comparing to measured and analyzed result, it find increasing of collector volume effects to catalyst temperature distribution and uniformity of catalytic converter

• Communications for Statistical Applications and Methods
• /
• 제22권4호
• /
• pp.377-387
• /
• 2015

The area under the ROC curve can be represented by both Mann-Whitney and Wilcoxon rank sum statistics. Consider an ROC surface and manifold equal to three dimensions or more. This paper finds that the volume under the ROC surface (VUS) and the hypervolume under the ROC manifold (HUM) could be derived as functions of both conditional Mann-Whitney statistics and conditional Wilcoxon rank sum statistics. The nullhypothesis equal to three distribution functions or more are identical can be tested using VUS and HUM statistics based on the asymptotic large sample theory of Wilcoxon rank sum statistics. Illustrative examples with three and four random samples show that two approaches give the same VUS and $HUM^4$. The equivalence of several distribution functions is also tested with VUS and $HUM^4$ in terms of conditional Wilcoxon rank sum statistics.

• East Asian mathematical journal
• /
• 제24권4호
• /
• pp.421-429
• /
• 2008

We study invariant lightlike submanifolds and almost contact CR-lightlike submanifolds of an indefinite cosymplectic manifold.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.4718-4725
• /
• 2011

본 연구는 성능 해석을 통하여 1600cc급 흡기매니폴드의 흡기유량 및 분배특성에 대한 연구를 수행하였다. 일차원 엔진 성능해석 프로그램과 3차원 유동해석프로그램을 이용하여 해석을 수행하였다. 흡기 매니폴드의 정상상태 유동해석을 수행한 결과, 일차원 유동해석과 3차원 유동해석의 유량계수 표준편차는 1% 미만으로 우수한 분배특성을 나타내었다. 일차원 해석 결과가 3차원 결과 대비 미소하게 증가된 결과를 보였지만 동등한 유량계수 경향성을 나타냈다. 비정상상태 해석은 분배특성 측면에서 정상상태 해석 결과와 유사한 결과를 보였으며, 정상상태 해석결과를 통한 비정상상태 분배특성의 예측이 가능함을 확인하였다.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.297-302
• /
• 2004

This paper presents the low cycle thermal fatigue of the engine exhaust manifold subject to thermo-mechanical cyclic loading. As a failure of the exhaust manifold is mainly caused by geometric constraints of the less expanded inlet flange and cylinder head, the analysis is based on the exhaust system model with three-dimensional temperature distribution and temperature dependent material properties. The result show that large compressive plastic deformations are generated at an elevated temperature of the exhaust manifold and tensile stresses are remained in several critical zones at a cold condition. From the repetition of these thermal shock cycles, maximum plastic strain range (0.454%) could be estimated by the stabilized stress-strain hysteresis loops. It is used to predict the low cycle thermal fatigue life of the exhaust manifold for the thermal shock test.

• 대한수학회논문집
• /
• 제27권4호
• /
• pp.763-770
• /
• 2012

In this paper, we study the geometry lightlike hypersurfaces (M, $g$, S(TM)) of a semi-Riemannian manifold ($\tilde{M}$, $\tilde{g}$) of quasi-constant curvature subject to the conditions: (1) The curvature vector field of $\tilde{M}$ is tangent to M, and (2) the screen distribution S(TM) is either totally geodesic in M or totally umbilical in $\tilde{M}$.

• 대한수학회논문집
• /
• 제27권1호
• /
• pp.185-195
• /
• 2012

We study the geometry of lightlike hypersurfaces M of an inde nite cosymplectic manifold $\bar{M}$ such that either (1) the characterist vector field $\zeta$ of $\bar{M}$ belongs to the screen distribution S(TM) of M or (2) $\zeta$ belongs to the orthogonal complement $S(TM)^{\perp}$ of S(TM) in $T\bar{M}$.

• 대한수학회논문집
• /
• 제33권4호
• /
• pp.1331-1339
• /
• 2018

In this paper the decomposition of basic equations of $(LCS)_n$-manifolds is carried out into horizontal and vertical projections. Further, we study the integrability of the distributions $D,D{\oplus}[{\xi}]$ and $D^{\perp}$ totally geodesic of semi-invariant submanifolds of $(LCS)_n$-manifold.

• East Asian mathematical journal
• /
• 제32권1호
• /
• pp.1-11
• /
• 2016

We study transversal half lightlike submanifolds of an indefinite Kaehler manifold of a quasi-constant curvature. First, we provide a new result for such a transversal half lightlike submanifold. Next, we investigate a statical half lightlike submanifold M such that (1) the screen distribution S(TM) is totally umbilical, or (2) M is screen homothetic.