• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.319-329
• /
• 1997

Wigner-Ville distribution has been recognized as a useful tool and applied to various types of mechanical noise and vibration signals, but its limitation which mainly comes from the cross-talk has not been well addressed. The cross-talk takes place for a signal with multiple components, simply because the Wigner-Ville distribution is a bilinear transform. The cross-talk often causes a negative value in the distribution. This cannot be accepted for the Wigner- Ville distribution, because it is an expression of power. Smoothing the Wigner-Ville distribution by convoluting it wih a window, is most commonly used to reduce the cross-talk. There can be infinite number of distributions depending on the windows. In this paper, we attempted to develop a distribution which is the best or the optimal in reducing the cross-talk. This could be possible by employing the ambiguity function. For a general signal, however it is difficult to express the ambiguity function as a mathematically closed form. This requires an appropriate modeling to make such expression possible. We approximated the Wigner-Ville distribution as a sum of linear segments. In the ambiguity function domain, the legitimate components are reflected as linear lines passing through the origin. Every lines has its own length and slope. But, the cross-talk is widely distributed in the ambiguity function plane. Based on this realization, we proposed a two-dimensional window which is in fact 'rotating window', that can eliminate cross-talk component. The rotating window is examined numerically and is found to have a better performance in reducing the cross-talk than conventional windows, the Gaussian window.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.241-250
• /
• 2016

This research aimed to analyze that there are main causes influencing the quality of trade distribution service. It means that the study was conducted to prove how the quality on trade distribution service affects customer satisfaction and loyalty with managers or higher who are responsible for trade distribution service overall. In accordance with analysis results, main causes (Reliability, Responsiveness, Support System) have a good implication for the quality of trade distribution, and Tangible has little influence. Moreover, customer satisfaction with the quality on trade distribution service has a positive impact on loyalty. Subject to the results, quality components of trade distribution service was ultimately verified that it has a positive relationship with loyalty via customer satisfaction. On the basis of this research, it is confidently expected to help improve the quality on trade distribution service.

• Journal of Korea Water Resources Association
• /
• v.46 no.4
• /
• pp.361-372
• /
• 2013

This study used the beta distribution to analyze the independent annual maximum rainfall events from 1961 to 2010 and decided the representative rainfall event for Seoul. In detail, the annual maximum rainfall events were divided into two groups, the upper 50% and the lower 50%. For each group, a beta distribution was derived to pass the mean location of the rainfall peaks. Finally, the representative rainfall event was decided as the rainfall histogram of the arithmetic average of the two beta distributions derived. The representative rainfall event derived has a realistic shape very similar to those observed annual maximum rainfall events, especially with the higher rainfall peak compared to that of the Huff distribution. Comparison with other rainfall distribution models shows that the temporal distribution of the representative rainfall event derived in this study is most similar to the Keifer & Chu model.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.825-833
• /
• 2013

An estimation of confidence intervals is essential to calculate uncertainty for greenhouse gases inventory. It is generally assumed that the population has a normal distribution for the confidence interval of parameters. However, in case data distribution is asymmetric, like nonnormal distribution or positively skewness distribution, the traditional estimation method of confidence intervals is not adequate. This study compares two estimation methods of confidence interval; parametric and non-parametric method for exponential distribution as an asymmetric distribution. In simulation study, coverage probability, confidence interval length, and relative bias for the evaluation of the computed confidence intervals. As a result, the chi-square method and the standardized t-bootstrap method are better methods in parametric methods and non-parametric methods respectively.

• Journal of Oriental Medical Thermology
• /
• v.5 no.1
• /
• pp.78-86
• /
• 2006

Objectives: To examine any potential relationships between the types of alopecia and the facial heat distribution in patients with alopecia Methods: 183 patients with alopecia participated in this study to provide facial heat distribution measured by the Infrared Thermography Scanner (ITS, Nec San-ei Instruments Ltd, Japan). The thermography scan was used in a light-and heat-protected room after 20 minutes’of resting period. 1.5m of distance maintained between the patients and ITS. Results: Specificity in the type of facial heat distribution was found as follow. 1. Types of facial heat distribution can be classified as T-type and diffused patterns. 2. There was a significant difference in the pattern of facial heat distribution among different types of alopecia (p=0.002): facial heat distribution appeared T-type in Androgenic Alopecia, Alopecia Areata, and Telogen Effluvium (71.3%, 85.7%, 70.4%), whereas diffused pattern was dominant in Seborrheic Alopecia(55.6%). 3. There was a significant difference in the pattern of facialheat distribution between men and women (p<0.001): While the T-type and diffused type were equally appeared in men (50.6%: 49.4%), T-type was dominant in women (88.0% vs. 12.0%). Conclusions: We conclude that the pattern of facial heat distribution differs depends on the types of alopecia and gender. These differences may provide useful information for the diagnosis and clinical therapy for this population.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2236-2245
• /
• 2009

This paper proposes the process for evaluating the impact of charging the PHEV(Plug-In Hybrid Electric Vehicle) on the distribution systems, and analyzes the study results employing the actual systems as the PHEV is highly expected to increase in the automobile industries in North America in the near future. Since the charging load of the PHEV directly connected to the distribution systems would consume electric power much more than any other existing electric product of residential customers, the new modeling and process would be required to consider the PHEV in distribution systems planning. The EPRI(Electric Power Research Institute) is collaboratively conducting the impact study of PHEV on the distribution systems with power utilities in North America. This study models distribution systems and the charging load of the PHEV using OpenDSS software, and analyzes the impact of PHEV on the distribution systems by assuming various scenarios with different charging time and PHEV types.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.6
• /
• pp.159-169
• /
• 2020

A cold chain logistics (CCL) model for chilled food (-1℃ to 8℃) distributed in China was developed in this study. The CCL model consists of a distribution center (DC) and distribution target points (DT). The objective function of the CCL model is to minimize the total distribution routes of all distributors. To find the optimal result of the objective function, the hybrid genetic algorithm (HGA) approach is proposed. The HGA approach was constructed by combining the improved K-means and genetic algorithm (GA) approaches. In the case study, three scenarios were considered for the CCL model based on the distribution routes and the available distance, and they were solved using the proposed HGA approach. Analysis results showed that the distribution costs and mileage were reduced by approximately 19%, 20% and 16% when the proposed HGA approach was used.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.849-860
• /
• 2021

Recently, it is easy to find cases of 3D printing product, equipment, and materials in the architecture field. However, there is a lack of distribution environment where 3D printing products can be traded on an online platform or to access on-demand services in the architecture field. Therefore, in this study, a distribution platform development plan was proposed in consideration of the maturity level of the 3D printing distribution market in the domestic architecture field. For this purpose, the research was carried out as follows. First, by analyzing the case of the 3D printing distribution platform, the development stage of the distribution platform was set as three stages from the perspective of market maturity, platform development level, and sales/purchase experience level of suppliers and consumers. Second, the market maturity of the current domestic architecture field was evaluated as the first stage, and a distribution platform that could be implemented in the first stage was presented as a pilot. Third, we presented the first stage pilot, collected practical opinions on future construction plans through in-depth interviews, and presented detailed implementation plans for each stage necessary to achieve the second and third stage market maturity goals. Based on the roadmap derived from this study, it is expected that the domestic distribution platform market will grow step by step in the future and be utilized for business model development.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.14 no.1
• /
• pp.23-45
• /
• 2012

The objective of this study is to provide development strategies in the production and distribution system of highland Chinese cabbage by evaluating and analyzing problems of the current system, focusing on several main stages between production and distribution system of highland Chinese cabbage. Through interview of groups such as farmers, distributers in the main producing areas, commission merchants of the wholesale market and large-scale distributors the relavant information was collected. Also, data such as production situations in main producing areas, distribution conditions in the wholesale market was analyzed. The functions of highland Chinese cabbage were classified and the current state of highland Chinese cabbage distribution system was investigated to provide an overall insight into the highland Chinese cabbage distribution system. Also the factors which will affect a price of wholesale market and consumer of highland Chinese cabbage were examined. Finally problems and improvements in the production and distribution system through analysis of the distribution system of highland Chinese cabbage were provided. the main contents of this study are as follows. The first is to keep stability of production in main producing areas by applying a differentiated production method, for example, rainshelter cultivation method. The second is to establish the distribution system which the relevant information is opened transparently. The third is that the consistent cold transportation system from main producing areas to consumers must be built.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4661-4664
• /
• 2012

Mammographic breast density is a known risk factor for breast cancer. To conduct a survey to estimate the distribution of mammographic breast density in Korean women, appropriate sampling strategies for representative and efficient sampling design were evaluated through simulation. Using the target population from the National Cancer Screening Programme (NCSP) for breast cancer in 2009, we verified the distribution estimate by repeating the simulation 1,000 times using stratified random sampling to investigate the distribution of breast density of 1,340,362 women. According to the simulation results, using a sampling design stratifying the nation into three groups (metropolitan, urban, and rural), with a total sample size of 4,000, we estimated the distribution of breast density in Korean women at a level of 0.01% tolerance. Based on the results of our study, a nationwide survey for estimating the distribution of mammographic breast density among Korean women can be conducted efficiently.