• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.343-363
• /
• 2023

Sulawesi island, as a global producer of nickel resources, is leading the rapid growth of nickel industry of Indonesia. Nickel laterite deposits in Sulawesi was formed by lateritization of the world-scale East Sulawesi Ophiolite (ESO) under the active tectonic setting and tropical rainforest climate. In this paper, exploration cases for nickel laterite deposits in five regions of Sulawesi are reported. Regional characteristics on nickel laterite deposits in Sulawesi are understood based on various exploration activities such as outcrop, trench and pit survey, petrological observation, geochemical analysis, and interpretation of drilling data, etc.. In the northeastern part of 'Southeast-Arm', which is a strategic location for nickel industry of Indonesia, ESO is extensively exposed to the surface. In the Morombo and Morowali regions, typical high-grade saprolite-type orebodies with a thickness of 10 to 20 m occur. The cases showed that topographic relief tends to regulate Ni-grade distribution and orebody thickness, and that high grade intervals tend to occur in places where joints and garnierite veins are dense. In the Tinanggea and South Palangga regions in the southern part of the Southeast-Arm, overburden composed of Neogene to Quaternary deposits is a major factor affecting the preservation and profitability of nickel laterite deposits. Despite the overburden, high-grade saprolite-type orebodies composed of Ni-bearing serpentine with garnierite veins occur in a thickness of around 10 m to secure economic feasibility. In contrast, in the Ampana region in the northern part of 'East-Arm', low-grade nickel laterite deposits with immature laterite profile was identified, which is thought to be the result of active denudation due to tectonic uplift. Exploration cases in this paper will help to understand characteristics and controlling factors on nickel laterite deposits in Sulawesi, Indonesia.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

• Analytical Science and Technology
• /
• v.19 no.3
• /
• pp.263-271
• /
• 2006

The levels of total PCBs, Co-PCBs and PCDD/Fs in the transformer insulation oil samples obtained using GC/ECD and HRGC/HRMS were ranged from N.D. to 77.3 ppm, from 0.0863 to 2.49 ppm and from N.D. to 0.00241 ppm, respectively. In terms of WHO-TEQ values, Co-PCBs and PCDD/Fs were ranged from 23.3 to 600 pgTEQ/g and from N.D. to 128 pgTEQ/g, respectively (${\Sigma}Co$-PCBs+PCDD/Fs concentration was calculated 24.4~728 pgTEQ/g). Although, the contribution of PCDD/Fs was below 12% in total TEQ concentration, it is suggested contamination of PCDD/Fs in transformer insulation oils. Among 10 samples, 4 samples showed higher concentration than 2 ppm (specific waste criterion of Korea) and Aroclor 1242, 1248, 1254 and 1260 was detected in samples as a single or mixture of Aroclor. It was shown reliable relationship between concentration of Co-PCBs and those of PCDD/Fs (p<0.003), however, was not shown between production year of transformer and concentration of PCBs. The distribution pattern of Co-PCB congeners showed that the ratios of mono-ortho substituted congeners were higher than non-ortho substituted congeners. Among that, PCB-118 congener was predominant. In addition, the OCDD congener was predominated in PCDD/Fs congeners as above 53%. Moreover, the congener pattern of Co-PCBs was similar to that of Aroclor as well as ambient air, which suggested that PCBs volatilization from transformer insulation oil affected the pattern of Co-PCBs in ambient air.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.285-292
• /
• 2009

It has been observed that, after long term storage, some ammunitions are misfired by tamping (combustionstopping) due to aging of the chemicals loaded in the ammunitions. Used in ammunitions are percussion powder which provides the initial energy, igniter which ignites the percussion powder, and a delay system that delays the combustion for a period of time. The percussion powder is loaded first, followed by the igniter and then the delay system, and the ammunitions explode by the energy being transferred in the same order. Tamping occurs by combustion-stopping of the igniter or insufficient energy transfer from the igniter to the delay system or the combustion-stopping of the delay system, which are suspected to be caused by low purity of the components, inappropriate mixing ratio, size distribution of particulate components, type of the binder, blending method, hydrolysis by the humidity penetrated during the long term storage, and chemical changes of the components by high temperature. Goal of this study is to find the causes of the combustion-stopping of the igniter and the delay system of the ammunitions after long term storage. In this study, a method was developed for testing of the combustion-stopping, and the size distributions of the particulate components were analyzed with field-flow fractionation (FFF), and then the mechanism of chemical change during long term storage was investigated by thermal analysis (differential scanning calorimetry), XRD (X-ray diffractometry), and XPS (X-ray photoelectron spectroscopy). For the ignition system, M (metal)-O (oxygen) and M-OH peaks were observed at the oxygen's 1s position in the XPS spectrum. It was also found by XRD that $Fe_3O_4$ was produced. Thus it can be concluded that the combustion-stopping is caused by reduction in energy due to oxidation of the igniter.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.504-513
• /
• 2009

In this study, the safety of commercial herbal medicines was evaluated by determining concentration of hazardous heavy metals. 3,152 samples (244 types) purchased by individual packing unit from market in Seoul, were analyzed using ICP-MS and mercury analyzer. As a result, the content (mg $kg^{-1}$) of Pb was higher in the above-ground part (0.92) than underground part (0.43). But in case of As and Cd contents, there is slightly higher in the underground-parts (0.26, 0.13) than the above-ground parts (0.18, 0.08). There were many herbal medicines exceeding regulatory limits of Cd comparing with other metals. The levels of Hg seemed to be different between above-ground part(0.009) and underground part (0.008) but there was no sample exceeding tolerance limits. In the comparison of imported samples with domestic herbal medicines, it was shown that Pb, As, and Hg were measured highly in the imported ones, Cd was not significantly different (t-test, p<0.05). The significant correlation was observed between Pb and As (r=0.386, p<0.01) but there was no difference in other parts. The heavy metal contamination of herbal medicines measured in total amount of respective heavy metals (mg $kg^{-1}$) was high in Flos (6.241) and Caulis (2.238), and decreased in the order of Cortex (1.634), Herba (1.154), Perithecium (0.861), Rhizoma (0.828), Radix (0.825), Fructus (0.475), and was low in Semen (0.422) (ANOVA-test, p<0.05).

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.30 no.3
• /
• pp.111-120
• /
• 2019

The objective of this study was to investigate the effect of different feed inoculation method on rumen fermentation in an in vitro. Three experimental treatments were used: control (CON, direct dispersion of feed (2 g) in rumen fluid), combinations of direct dispersion (1 g) and nylon bag (DNB, pore size: 50 ㎛, 1 g), and nylon bag (NB, 2 g). An in vitro fermentation experiment was carried out using strained rumen fluid for 48 h incubation time and timothy was used as a substrate. At the end of the incubation, in vitro dry matter digestibility (IVDMD), in vitro neutral detergent fiber digestibility (IVNDFD), pH, volatile fatty acids (VFA), ammonia nitrogen (NH₃-N), and microbial community were evaluated and gas production was estimated at 3, 6, 12, 24, 48 h incubation periods. Gas production was higher in CON than DNB and NB at 6 and 12 h incubation time (p<0.01). There were no differences in final gas production, pH, NH₃-N concentration, total VFA production, and VFA profiles among treatments. The IVDMD was lowest in CON (p<0.01) but the IVNDFD was not differed by feed distribution methods. There were no significant differences in general bacteria and fungi. Protozoa count was highest in NB treatment among treatments (p<0.01). The abundance of cellulolytic bacteria, Ruminococcus flavefaciens and Fibrobacter succinogenes, was highest in the CON among treatments (p<0.01).

• Analytical Science and Technology
• /
• v.36 no.6
• /
• pp.291-299
• /
• 2023

The benzo[a]pyrene in edible oils is extracted using methods such as Liquid-liquid, soxhlet and ultrasound-assisted extraction. However these extraction methods have significant drawbacks, such as long extraction time and large amount of solvent usage. To overcome these drawbacks, this study attempted to improve the current complex benzo[a]pyrene analysis method by applying the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method that can be analyzed in a simple and short time. The QuEChERS method applied in this study includes extraction of benzo[a]pyrene into n-hexane saturated acetonitrile and n-hexane. After extraction and distribution using magnesium sulfate and sodium chloride, benzo[a]pyrene is analyzed by liquid chromatography with fluorescence detector (LC/FLR). As a result of method validation of the new method, the limit of detection (LOD) and quantification (LOQ) were 0.02 ㎍/kg and 0.05 ㎍/kg, respectively. The calibration curves were constructed using five levels (0.1~10 ㎍/kg) and coefficient (R²) was above 0.99. Mean recovery ratio was ranged from 74.5 to 79.3 % with a relative standard deviation (RSD) between 0.52 to 1.58 %. The accuracy and precision were 72.6~79.4 % and 0.14~7.20 %, respectively. All results satisfied the criteria ranges requested in the Food Safety Evaluation Department guidelines (2016) and AOAC official method of analysis (2023). Therefore, the analysis method presented in this study was a relatively simple pretreatment method compared to the existing analysis method, which reduced the analysis time and solvent use to 92 % and 96 %, respectively.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.94-108
• /
• 2023

Onyanghaenggung Palace(temporary palace at Onyang) is an important cultural heritage that can substantially confirm the king's onhaeng(溫行) base on literature records such as <Ongungyeonggoedae(溫宮靈槐臺)>, <Oncheonhaenggungdo(溫泉行宮圖)> of 『Ongungsasil(溫宮事實)』『, Younggoedaegi(靈槐臺記)』and cultural property such as Yeonggoedae(靈槐臺) and Shinjeong Monument(神井碑). As the Onyang Tourist Hotel is located in the presumed site of the Onyanghaenggung Palace, even the identity of the Onyanghaenggung Palace site is being threatened without restoration efforts. The purpose of this study is to estimate the location of Onyanghaenggung Palace based on <Oncheonhaenggungdo> before the damages during the Japanese colonial period. To achieve these purposes, records related to Onhaeng during successive kings' terms in the Joseon Dynasty are first reviewed, before changes in the architecture of Onyanghaenggung Palace that took place in the Joseon Dynasty and damage suffered during the Japanese colonial period are summarized, and finally <Oncheonhaenggungdo>, <Eupji>, <Ancient Maps>, <Jijeokwondo> are reviewed. Based on these processes, the location of Onyanghaenggung Palace is estimated by comparing the current Onyang Tourist Hotel and the surrounding area. The results of this study are as follows. First, if the 1,758 cheok(尺) of 「Onyanggun eupji」 and 「Hoseo eupji」 are converted in Jucheok(周尺), the scope of Onyanghaenggung Palace is close to the inner circumference of the site(垈) in Jijeokwondo(1914). Second, the streamlet leading to Oncheoncheon(溫泉川) from the southern side of Onyanggwan(溫陽館), the hot spring hole in use of <Distribution Map of Hot Spring(溫泉分布見取圖)>(1925, 1928), and considering the relationship of the inner east gate(內東門), Bigak(碑閣), Sinjeong(神井) of <Oncheonhaenggungdo>, the building of Hermann Gustav Theodor Sander and the Copyright Commission's Onyang Hot Springs photograph can be estimated as the Onyanghaenggung Palace Hot-spring, namely Tangsil(湯室). Third, in the process of developing to amusement park, the transfer and relocation of the Yeonggaedae site(a governmentowned property) was requested by Gyeongnam Railway Company, but Chungcheongnam-do denied transfer and relocation of the Yeonggaedae because of the importance in the history of Onyang Hot Springs, so the government-owned Yeonggaedae Monument site were permanently preserved at the current location together with the hoe tree(Sophora japonica L.). Also, Yeonggoedae in <Tourists Attractions around Gyeongnam Railway in Joseon (朝鮮京南鐵道沿線名所交通図絵)> (1929) is shown to exist in its current location, and it can be seen that the Shinjeong Monument Pavilion was moved to the front of Shinjeonggwan (神井館). Based on the circumference of Onyanghaenggung Palace, the location of Onyanghaenggung Palace Hot Spring (Tangsil) and Yeonggaedae Monument Pavilion, changes in roads and lots of land during the Japanese colonial period and the modern period, as well as the location of Onyanghaenggung Palace and other major buildings, can be estimated to extend to the current Shimin-ro and Onyang Hot Spring Market.

• Clean Technology
• /
• v.29 no.4
• /
• pp.255-261
• /
• 2023

Power semiconductors are semiconductors used for power conversion, transformation, distribution, and control. Recently, the global demand for high-voltage power semiconductors is increasing across various industrial fields, and optimization research on high-voltage IGBT components is urgently needed in these industries. For high-voltage IGBT development, setting the resistance value of the wafer and optimizing key unit processes are major variables in the electrical characteristics of the finished chip. Furthermore, the securing process and optimization of the technology to support high breakdown voltage is also important. Etching is a process of transferring the pattern of the mask circuit in the photolithography process to the wafer and removing unnecessary parts at the bottom of the photoresist film. Ion implantation is a process of injecting impurities along with thermal diffusion technology into the wafer substrate during the semiconductor manufacturing process. This process helps achieve a certain conductivity. In this study, dry etching and wet etching were controlled during field ring etching, which is an important process for forming a ring structure that supports the 3.3 kV breakdown voltage of IGBT, in order to analyze four conditions and form a stable body junction depth to secure the breakdown voltage. The field ring ion implantation process was optimized based on the TEG design by dividing it into four conditions. The wet etching 1-step method was advantageous in terms of process and work efficiency, and the ring pattern ion implantation conditions showed a doping concentration of 9.0E13 and an energy of 120 keV. The p-ion implantation conditions were optimized at a doping concentration of 6.5E13 and an energy of 80 keV, and the p+ ion implantation conditions were optimized at a doping concentration of 3.0E15 and an energy of 160 keV.

• Korea Trade Review
• /
• v.48 no.4
• /
• pp.303-320
• /
• 2023

Recently, import and export companies have been using T/T remittance and Surrender B/L more frequently than L/C when selecting the process and method of trade payment settlement. The new trade and logistics environment is thriving in the era of the Fourth Industrial Revolution (4IR). Document-based trade transactions are undergoing a digitalization as bills of lading or smart contracts are being developed. The purpose of this study is to verify whether exporters choose export payment types based on negotiating factors. In addition, we would like to discuss the application of the characteristics of the new trade and logistics environment. Data for analysis was collected through surveys. The collection method consisted of direct visits to the company, e-mail, fax, and online surveys. The survey distribution period is from February 1, 2023, to April 30, 2023. The questionnaire was distributed in 2,000 copies, and 447 copies were collected. The final 336 copies were used for analysis, excluding 111 copies that were deemed inappropriate for the purpose of this study. The results of the study are shown below. First, among the negotiating factors, the product differentiation of exporters did not significantly affect the selection of export payment types. Second, among the negotiating factors, the greater the purchasing advantage recognized by exporters, the higher the possibility of using the post-transfer method. In addition to analyzing the results, this study suggests that exporters should consider adopting new payment methods, such as blockchain technology-based bills of lading and trade finance platforms, to adapt to the characteristics of the evolving trade and logistics environment. Therefore, exporters should continue to show interest in initiatives aimed at digitizing trade documents as a response to the challenges posed by bills of lading. In future studies, it is necessary to address the lack of social awareness in Korea by conducting advanced research abroad.