• Journal of Distribution Science
• /
• v.15 no.1
• /
• pp.83-93
• /
• 2017

Purpose - After the transition, the development of defense industry in Eastern Europe has been regressed. Recently, they have internationally recognized that new products have been exported and contributed to the Innovation-Based Manufacturing of national economy such as unmanned reconnaissance aircraft, water purification technology, and mobile chemical laboratory, etc. The military forces in Eastern Europe are re-armed by the localization of self-produced munitions in their own defense industry, and then emphasize fostering their own defense industry. Thus, if they make a collaboration with other nations as a industrial cluster, it will gain a competitive edge on the defense industry. Research design, data, and methodology - The study was designed with the data of each national defense department. The research of the subject was reviewed before and after the transition. Thousands of workers have worked in defense industries before the transition, however, the defense industry and experts left after the transition. The Hungarian defense spending on GDP also dropped sharply from 1.72% in 2000 to 0.85% in 2013. But, due to the crisis in Ukraine and the crisis of Syrian refugees, the Viségrad Group (V4) member countries have also increased their interest in a defense and industries as well as the confidence in the EU and NATO. Results - On the whole, the joint of military training and purchase of defense materials were found in order to form the EU cooperative combat troops in CEE. There are the implementation of a joint manual plan for strengthening V4 security policy and the joint military exercises for V4 every year, and the others are electronic warfare and innovation of V4 national forces. Through such a performance analysis methodology, we found that the defense industry is developed through the national cluster cooperation among CEEs and spreading global distribution. Conclusions - Eastern Europe and Balkan countries have been looking forward to cooperating with the non-EU countries such as Korea and other defense industries. There are a lot of potential development into a new civilian cooperation defense industry for global-distribution. Thus, Korea should develop electronic commercial applications, not just as a weapon exporting region.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.51-56
• /
• 2008

High quality power supplying of high voltage distribution lines electric railway system is the important function, high voltage distribution system is complicated witch is compose with distribution line, circuit break, protection facilities and so on. Among this components, role of substation is most important for elevation of reliability in electric power system. Therefore, the enhanced reliability considering the preventive inspection, repair work replacement is necessary. This paper proposes protection method in railway high voltage distribution lines. we model distribution system using PSCAD/EMTDC(Power System Computer Aided Design/Electro Magnetic Transients DC Analysis Program) and extract various fault data. In conclusion this methods can protection of ground fault.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.4
• /
• pp.413-428
• /
• 2013

In this study, Ant Colony Algorithm(ACO) was used for optimal model. ACO which are metaheuristic algorithm for combinatorial optimization problem are inspired by the fact that ants are able to find the shortest route between their nest and food source. For applying the model to water distribution systems, pipes, tanks(reservoirs), pump construction and pump operation cost were considered as object function and pressure at each node and reservoir level were considered as constraints. Modified model from Ostfeld and Tubaltzev(2008) was verified by applying 2-Looped, Hanoi and Ostfeld's networks. And sensitivity analysis about ant number, number of ants in a best group and pheromone decrease rate was accomplished. After the verification, it was applied to real water network from S water treatment plant. As a result of the analysis, in the Two-looped network, the best design cost was found to $419,000 and in the Hanoi network, the best design cost was calculated to $6,164,384, and in the Ostfeld's network, the best design cost was found to $3,525,096. These are almost equal or better result compared with previous researches. Last, the cost of optimal design for real network, was found for 66 billion dollar that is 8.8 % lower than before. In addition, optimal diameter for aged pipes was found in this study and the 5 of 8 aged pipes were changed the diameter. Through this result, pipe construction cost reduction was found to 11 percent lower than before. And to conclusion, The least cost design model on water distribution system was developed and verified successfully in this study and it will be very useful not only optimal pipe change plan but optimization plan for whole water distribution system.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.665-684
• /
• 2014

Purpose: The purpose of this study was to test and verify on the interrelationship among Service Quality, and Customer Satisfaction and Customer Loyalty in the Humidifier Goods industry. Especially, we study on the relative importance of each CS variables by distribution channel. Nowadays, most of manufacturing companies are proceeding the product servitization, which is combined service contents with product characteristics in the field of manufacturing industries. Methods: We surveyed humidifier purchaser about the some of CS variables and analyzed it using SPSS 21.0 and AMOS 21.0 as a statistical analysis tool. We use the frequency analysis, confirmatory factor analysis, multi-regression analysis and structural equation modeling analysis for our empirical study. Results: As the result of study, we find that Service Quality(SQ) influence Customer Satisfaction(CS) and CS influence Customer Loyalty(CL). Also, we verify that CS works mediate interaction on the effects between SQ and CL. And there are the significant relative effect of SQ to Customer Satisfaction in some of distribution channel. Conclusion: Finally, we make certain that the market size of the Humidifier goods industry will be increased rapidly. And the distribution channe l is more important to medium and small-sized enterprise. So, we have to pay attention to the study on the distribution channel of the Humidifier goods industry. And then, we expect more researches and studies on Service Quality and Customer Satisfaction in the field of manufacturing industries.

• Journal of Environmental Health Sciences
• /
• v.28 no.3
• /
• pp.9-18
• /
• 2002

This study was to observe the occurrence of heterotrophic bacteria in terms of free chlorine residuals in two different water distribution systems belong to both K and Y water treatment plant. The data analyzed in this study showed that in distribution systems(DS), the free chlorine residuals were decreased from 0.10 to 0.56 ㎎/1 for K, and 0.51 and 0.78 ㎎/l for Y The decay of free chlorine were clearly higher in both March and August than those in January. The HPC in DS were ranged from 0 to 40 CFU/ml for K,0 to 270 CFU/ml for Y, on R2A medium. In particular, Its level was relatively high at consumers' ground storage tanks, taps and point-of-end area of Y, The predominant genera found in the distribution systems were Acinetobacter, Sphingomonas (branch of Pseudomonas), Microroccus, Bacillus, Staphylococcus. The diversity of heterotrophic bacteria was increased in the end-point area. Most of them were either encapsulated cells or cocci of gram-positve. In conclusion, the point-of-end area in distribution systems showed that the longer flow distance from WTP the greater diversity and higher level of heterotrophic bacteria due to the significant decay of free chlorine residuals.

• Journal of Environmental Health Sciences
• /
• v.44 no.4
• /
• pp.360-369
• /
• 2018

Objectives: Outdoor tobacco smoke can penetrate into the indoor environment through cracks in the building envelope. This study aimed to characterize the particle size distribution of infiltrated secondhand smoke (SHS) through the gap in a single glazed and a secondary glazed window according to pressure differences in a chamber. Methods: Two polyvinyl chloride sliding windows were evaluated for infiltration, one with a glazed window and the other with a secondary glazed window. Each window was mounted and sealed in a polycarbonate chamber. The air in the chamber was discharged to the outside to establish pressure differences in the chamber (${\Delta}P$). Outdoor smoking sources were simulated at a one-meter distance from the window side of the chamber. The particle size distribution of the infiltrated SHS was measured in the chamber using a portable aerosol spectrometer. The particle size distribution of SHS inside the chamber was normalized by the outdoor peak for fine particles. Results: The particle size distribution of SHS inside the chamber was similar regardless of window type and ${\Delta}P$. It peaked at $0.2-0.3{\mu}m$. Increases in particulate matter (PM) concentrations from SHS infiltration were higher with the glazed window than with the secondary glazed window. PM concentrations of less than $1{\mu}m$ increased as ${\Delta}P$ was increased inside the chamber. Conclusions: The majority of infiltrated SHS particles through window gap was $0.2-0.3{\mu}m$ in size. Outdoor SHS particles infiltrated more with a glazed window than with a secondary glazed window. Particle sizes of less than $1{\mu}m$ were associated with ${\Delta}P$. These findings can be a reference for further research on the measurement of infiltrated SHS in buildings.

• Journal of Periodontal and Implant Science
• /
• v.46 no.3
• /
• pp.207-217
• /
• 2016

Purpose: The aim of this study is to analyze and visualize the distribution of patients visiting the periodontology department at a dental college hospital, using a geographic information system (GIS) to utilize these data in patient care and treatment planning, which may help to assess the risk and prevent periodontal diseases. Methods: Basic patient information data were obtained from Dankook University Dental Hospital, including the unit number, gender, date of birth, and address, down to the dong (neighborhood) administrative district unit, of 306,656 patients who visited the hospital between 2007 and 2014. The data of only 26,457 patients who visited the periodontology department were included in this analysis. The patient distribution was visualized using GIS. Statistical analyses including multiple regression, logistic regression, and geographically weighted regression were performed using SAS 9.3 and ArcGIS 10.1. Five factors, namely proximity, accessibility, age, gender, and socioeconomic status, were investigated as the explanatory variables of the patient distribution. Results: The visualized patient data showed a nationwide scale of the patient distribution. The mean distance from each patient's regional center to the hospital was $30.94{\pm}29.62km$ and was inversely proportional to the number of patients from the respective regions. The distance from a regional center to the adjacent toll gate had various effects depending on the local distance from the hospital. The average age of the patients was $52.41{\pm}12.97years$. Further, a majority of regions showed a male dominance. Personal income had inconsistent results between analyses. Conclusions: The distribution of patients is significantly affected by the proximity, accessibility, age, gender and socioeconomic status of patients, and the patients visiting the periodontology department travelled farther distances than those visiting the other departments. The underlying reason for this needs to be analyzed further.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.317-323
• /
• 2009

Theoretical calculations for the secondary current distributions for the electrode with a projection part in electroplating were performed. Two kinds of electrodes were considered. One is a electrode with the overall conducting surfaces(Case 1) and the other is an electrode in which only a projection part has a conducting surface(Case 2). The effects of applied potential, the ratio of ion exchange current to conductivity, $\xi$ and the aspect ratio on the current distribution were examined. The increase of applied current or the value of $\xi$ decreased the uniformity of current distribution. The small value of aspect ratio resulted the more uniform current distribution and Case 2 showed the better uniformity than Case 2. When this model was applied into an electrode with various projection parts, the local current distribution along the electrode surface were obtained successfully. In this case, the decrease of $\xi$ also increase the uniformity of current distribution as seen previously.

• The korean journal of orthodontics
• /
• v.45 no.4
• /
• pp.198-208
• /
• 2015

Objective: To quantify, for each activation, the effect of preactivations of differing distribution and intensity on the neutral position of T-loops (7-mm height), specifically the horizontal force, moment to force (M/F) ratio, and load to deflection ratio. Methods: A total 100 loops measuring $0.017{\times}0.025$ inches in cross-section were divided into two groups (n = 50 each) according to composition, either stainless steel or beta-titanium. The two groups were further divided into five subgroups, 10 loops each, corresponding to the five preactivations tested: preactivations with occlusal distribution ($0^{\circ}$, $20^{\circ}$, and $40^{\circ}$), gingival distribution ($20^{\circ}$), and occlusal-gingival distribution ($40^{\circ}$). The loops were subjected to a total activation of 6-mm with 0.5-mm iterations. Statistical analysis was performed using comprised ANOVA and Bonferoni multiple comparison tests, with a significance level of 5%. Results: The location and intensity of preactivation influenced the force intensity. For the M/F ratio, the highest value achieved without preactivation was lower than the height of the loop. Without preactivation, the M/F ratio increased with activation, while the opposite effect was observed with preactivation. The increase in the M/F ratio was greater when the preactivation distribution was partially or fully gingival. Conclusions: Depending on the preactivation distribution, displacement of uprights is higher or lower than the activation, which is a factor to consider in clinical practice.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.325-330
• /
• 2012

In this paper, drain induced barrier lowering(DIBL) has been analyzed as one of short channel effects occurred in double gate(DG) MOSFET to be next-generation devices. Since Gaussian function been used as carrier distribution for solving Poisson's equation to obtain analytical solution of potential distribution, we expect our results using this model agree with experimental results. DIBL has been investigated according to projected range and standard projected deviation as variables of Gaussian function, and channel structure and channel doping intensity as device parameter. Since the validity of this analytical potential distribution model derived from Poisson's equation has already been proved in previous papers, DIBL has been analyzed using this model. Resultly, DIBL has been greatly changed for channel structure and doping concentration.