• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.738-741
• /
• 2018

As DC power and DC load increase, unnecessary conversion process occurs in existing system. Due to these problems, interest in DC distribution systems has increased recently. As the importance of DC distribution system becomes higher, it is necessary to analyze the DC current. In this paper, we briefly describe the control method of the converter and describe the DC power flow calculation method. finally, we compared the simulation results of MATLAB and ETAP.

• Journal of Environmental Health Sciences
• /
• v.22 no.3
• /
• pp.64-71
• /
• 1996

Measurement of concentration and size distribution of TSP, ammonium, nitrate and sulfate were made from Mar., 1991. to June., 1992 in Seoul. The seasonal variation of concentration and size distribution of aerosols has been investiated. Aerosol were collected and size frationated by Andersen air sampler. Size classified samples were extrated with deionized water and analyzed for ammonium, nitrate and sulfate by ion chromatography. As the results of measurement, the average of concentration and MMAD(mass median aerodynamic diameter) were $118.58 \mu g/m^3$, and $2.77 \mu m$ for TSP, $1.92 \mu g/m^3$ and $1.35 \mu m$ for ammonium, $1.34 \mu g/m^3$ and $1.58 \mu m$ for nitrate, $8.52 \mu g/m^3$ and $2.15 \mu m$ for sulfate. The Seasonal variation of concentration and size distribution was observed for ammonium, nitrate and sulfate. The concentration peak of TSP was observed in coarse particles in spring and observed in fine particles in winter. The concentration's distribution of TSP, ammonium, nitrate and sulfate was observed bimodal type during all season.

• Journal of Environmental Science International
• /
• v.19 no.9
• /
• pp.1153-1159
• /
• 2010

Identification of probability distribution for water quality constituents from specific land use is important to achieve successful implementation of TMDL program. In this 3-year study, distribution of discharge and BOD(Biological Oxygen Demand) concentration from paddy rice fields were monitored. Four probability distributions, normal, log-normal, Gamma and Weibull were fitted and the goodness-of-fit was assessed using probability plots and Kolmogorov-Smirnov test. $EMC_s$ of BOD in runoff from paddy field ranged 0.37 to $7.99\;mgL^{-1}$, and all four probability distributions were acceptable. But the normal distribution would be preferred for BOD from paddy fields considering nature of straight forward application.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.838-846
• /
• 2015

This paper deals with the modified modeling of PV system based on the PSCAD/EMTDC and optimal control method of customer voltages in real distribution system interconnected with the photovoltaic (PV) systems. In order to analyze voltage variation characteristics, the specific modeling of PV system which contains the theory of d-q transformation, current-control algorithm and sinusoidal PWM method is being required. However, the conventional modeling of PV system can only perform the modeling of small-scale active power of less than 60 [kW]. Therefore, this paper presents a modified modeling that can perform the large-scale active power of more than 1 [MW]. And also, this paper proposes the optimal operation method of step voltage regulator (SVR) in order to solve the voltage variation problem when the PV systems are interconnected with the distribution feeders. From the simulation results, it is confirmed that this paper is effective tool for voltage analysis in distribution system with PV systems.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.445-452
• /
• 2009

This study aims to improve the fit of high school girls' uniforms. This study researched on the fit of the recent high school girls' uniforms and developed a sizing system that adequately reflects their body figures. The results are as follows. First, the research showed that over 50% of the highschool girls wore their blouses too tight, whereas over 60% of the girls wore skirts that were appropriately fitted. Second, to classify the high school girls' figures, factor analysis and cluster analysis were conducted. 5 factors were extracted for upper body and 3 factors for the lower body. The girls were then divided into 3 groups for the upper body and 4 groups for the lower body. Third, KS size intervals were used for frequency distribution of height and bust for the bodice, height and waist for the lower body. Sizing system of the uniform company and the frequency distribution of sizes were compared. As a result, sizing system of the uniform company and the frequency distribution slightly overlapped. Fourth, sizing system considering body type distribution and high frequency distribution section of sizes was suggested. As a result, for the upper body, when 6 sizes were suggested, 43.9% of the population was covered and when 11 sizes were suggested, 58.3% was covered. For the lower body, when 6 sizes were suggested, 32.2% was covered, and when 11 sizes were suggested 58.9% of the population was covered.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.5
• /
• pp.58-67
• /
• 1996

In the present study, the pressure distribution, wall shear stress distribution and friction factor of developing turbulent pulsating flows are investigated theoretically and experimentally in the entrance region of a square duct. The pressure distribution for turbulent pulsating flows are in good agreement with the theoretical values. The time-averaged pressure gradients of the turbulent pulsating flows show the same tendency as those of turbulent steady flows as the time-averged Reynolds number $(Re_{ta})$ increase. Mean shear stresses in the turbulent pulsating flow increase more in the inlet flow region than in the fully developed flow region and approach to almost constant value in the fully developed flow region. In the turbulent pulsating flow, the friction factor of the quasi-steady state flow $({\lambda}_{q, tu})$ follow friction factor's law in turbulent steady flow. The entrance length of the turbulent pulsating flow is not influenced by the time-averaged Reynolds number $(Re_{ta})$ and it is about 40 times as large as the hydraulic diameter.

• Journal of Distribution Science
• /
• v.12 no.5
• /
• pp.71-80
• /
• 2014

Purpose - The object of this paper is to ascertain how Japan has become a powerful trader in the international grain market. A case in point is the world's third largest U.S. major grain trader, Gavilon, merged with general trading company Marubeni in 2012. What are Japan's strategies and their implications? Research design, data, and methodology - The study analyzed Japanese Ministry of Agriculture, Forestry, and Fisheries data, and data from daily and weekly papers. The paper employed various data and research methodologies. Results - The Lee Myeong-Bak government tried for three years to create a company similar to Cargill, but the project eventually failed. On the other hand, Japan has emerged as a leader in the international grain distribution market for the past 50 years, with the cooperation of government and private companies. Conclusion - The findings of this study show that Korea, China, India, and other countries' international major grain companies now compete to be powerful, major grain traders. South Korea could be the leader of the international grain market through the development of a more careful and long-term strategy.

• Journal of Distribution Science
• /
• v.16 no.1
• /
• pp.29-36
• /
• 2018

Purpose - The purpose of the research is to further explore the understanding of the nature of the brand distribution service (i.e., service brand) by undertaking a quantitative investigation. We focus on the role of customer's perception of service brand on the customer value creation process. Research design, data, and methodology - This study used single cross-sectional design and 137 airline passengers as respondents using a convenience random sampling. We distributed the online questionnaires by email address. The empirical setting for this research is airline service in Indonesia with a consideration that airline service has the useful context for this research as the service delivery process involve extensive customer interactions with the airline and its employees. We then analyzed the data using multiple regression (step-wise) method to fulfill the research objectives. Results - Using the step-wise regression method, the result shows that the influential factors to create customer value are cost and company image. The result suggests a company to improve its costs components and its company image in order to increase the customer value. Conclusions - The research shows that costs play a critical role, and completed with the company image to form the customer value variable. This shows that mostly customer formed their value based on costs they sacrificed. Mainly, this evaluation is monetary cost based, while Indonesian customers tend to have a high value for money demands.

• Journal of Korea Multimedia Society
• /
• v.7 no.11
• /
• pp.1531-1539
• /
• 2004

In this paper, we propose an efficient method for locating human lips. Based on Point Distribution Model and Principle Component Analysis, a lip shape model is built. Lip boundary model is represented based on the concatenated gray level distribution model. We calculate the distribution of shape parameters using Gaussian mixture. The problem to locate lip is simplified as the minimization problem of matching object function. The Down Hill Simplex Algorithm is used for the minimization with Gaussian Mixture for setting initial condition and refining estimate of lip shape parameter, which can refrain iteration from converging to local minima. The experiments have been performed for many images, and show very encouraging result.

• Journal of Korea Multimedia Society
• /
• v.18 no.12
• /
• pp.1519-1527
• /
• 2015

TFT-LCD automatic defect inspection system for detecting defects in place of the visual tester does pre-processing, candidate defect pixel detection, and recognition and classification through a blob analysis. An over-detection result of defects acts as an undue burden of blob analysis for recognition and classification. In this paper, we propose defect detection method based on the histogram distribution modeling of TFT-LCD image to minimize over-detection of candidate defective pixels. Primary defect candidate pixels are detected estimating the skewness of the luminance distribution histogram of the background pixels. Based on the detected defect pixels, the defective pixels other than noise pixels are detected using the distribution histogram model of the local area. Experimental results confirm that the proposed method shows an excellent defect detection result on the image containing the various types of defects and the reduction of the degree of over-detection as well.