• Journal of environmental and Sanitary engineering
• /
• v.24 no.1
• /
• pp.13-24
• /
• 2009

This study was performed to determine the effect of the influent flow distribution ratio and hydraulic retention time(HRT) on removal of organic matter, nitrogen and phosphorus when domestic sewage was treated by the advanced step aeration(ASA) process. Results of the experiment for the determination of the optimum influent flow distribution ratio between the anaerobic reactor and the anoxic reactor showed BOD removal efficiencies of above 92.0% at all influent flow distribution ratios from 9:1 to 4:6. The highest T-N removal efficiency was 82.6% at the influent flow distribution ratio of 6:4. On the other hand, the highest T-P removal efficiency was 67.8% at the influent flow distribution ratio of 9:1. Considering both the T-N and T-P removal efficiencies, the influent distribution ratio of 6:4 was considered the optimum. Results of the experiment for the determination of the optimum HRT at the optimum influent flow distribution ratio of 6:4 revealed BOD removal efficiencies better than 92.7% at all HRTs from 12hr down to 6hr. The highest T-N and T-P removal efficiency were 82.6% and 59.5%, respectively both at the HRT of 8hr. In conclusion, the optimum influent flow distribution ratio and HRT for treatment of domestic sewage by the ASA process were determined to be 6:4 and 8hr, respectively.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.6
• /
• pp.41-47
• /
• 2017

This study is an empirical analysis of the welfare of small and medium venture company trade. In the past, although the study analyzes the trade welfare for representative firm, this research is focusing on the distribution of an entire industry of companies analyzed. In this study, medium-to venture enterprise-scale for logarithmic normal distribution and Pareto distribution is estimated, and this study investigates the trading welfare changes. Results of the analysis can be summarized as follows. First of all, greater trade benefits enterprise-scale heterogeneity appeared to be significant. The result of this finding appeared to be the same to large firms as well as small and medium ventures. Trading welfare, assuming the distribution of Pareto rather than logarithmic normal distribution it's supposed to be overwhelmingly large. Secondly, the case of large corporations shows the more trade welfare than that of small and medium venture companies. Third, assuming homogeneous distribution of enterprise-scale trade welfare differences did not exist. Finally, from the point of view of increasing the welfare of trade, the diversity aiming of venture business is a very important role in the long term, because of the small and medium-sized ventures trade role.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.249-259
• /
• 2018

More than half of annual rainfall occurs in summer season in Korea due to its climate condition and geographical location. A frequency analysis is mostly adopted for designing hydraulic structure under the such concentrated rainfall condition. Among the various distributions, univariate Gumbel distribution has been routinely used for rainfall frequency analysis in Korea. However, the distributional changes in extreme rainfall have been globally observed including Korea. More specifically, the univariate Gumbel distribution based rainfall frequency analysis is often fail to describe multimodal behaviors which are mainly influenced by distinct climate conditions during the wet season. In this context, we purposed a Gumbel mixture distribution based rainfall frequency analysis with a Bayesian framework, and further the results were compared to that of the univariate. It was found that the proposed model showed better performance in describing underlying distributions, leading to the lower Bayesian information criterion (BIC) values. The mixed Gumbel distribution was more robust for describing the upper tail of the distribution which playes a crucial role in estimating more reliable estimates of design rainfall uncertainty occurred by peak of upper tail than single Gumbel distribution. Therefore, it can be concluded that the mixed Gumbel distribution is more compatible for extreme frequency analysis rainfall data with two or more peaks on its distribution.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.6
• /
• pp.77-85
• /
• 2018

Purpose - The purpose of this study is to subdivide trade transaction-centered structure in a logistics/distribution industry system to apply blockchain, to establish and resolve with which types of technology, and to provide policy direction of government institution and technology to apply blockchain in this kind of industry. Research design, data, and methodology - This study was conducted with previous researches centered on cases applied in various industry sectors on the basis of blockchain technology. Results - General fields of blockchain application include digital contents distribution, IoT platform, e-Commerce, real-estate transaction, decentralized app. development(storage), certification service, smart contract, P2P network infrastructure, publication/storage of public documents, smart voting, money exchange, payment/settlement, banking security platform, actual asset storage, stock transaction and crowd funding. Blockchain is being applied in various fields home and abroad and its application cases can be explained in the banking industry, public sector, e-Commerce, medical industry, distribution and supply chain management, copyright protection. As examined in the blockchain application cases, it is expected to establish blockchain that can secure safety through distributed ledger in trade transaction because blockchain is established and applied in various sectors of industries home and abroad. Parties concerned of trade transaction can secure visibility even in interrupted specific section when they provide it as a base for distributed ledger application in trade and establish trade transaction model by applying blockchain. In case of interrupted specific section by using distributed ledger, blockchain model of trade transaction needs to be formed to make it possible for parties concerned involved in trade transaction to secure visibility and real-time tracking. Additionally, management should be possible from the time of contract until payment, freight transfer to buyers through land, air and maritime transportation. Conclusions - In order to boost blockchain-based logistics/distribution industry, the government, institutionally, needs to back up adding legal plan of shipping, logistics and distribution, reviewing standardization of electronic switching system and coming up with blockchain-based industrial road maps. In addition, the government, technologically, has to support R&D for integration with other high technology, standardization of distribution industry's blockchain technology and manpower training to expand technology development.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.370-378
• /
• 2012

This study is to find out the distribution characteristic of Octopus minor in the Tando Bay on the southwest coast of Korea with conducting surveys from May of 2006 to April of 2007. Surveys were carried out at 20 stations on 2 and 3 tide time in the low speed of high tide at night and conducted during 30minutes (4 times fishing) per station. Catch per unit effort (CPUE) was estimated by total catch per 500hooks at each station. Monthly CPUE showed that they put highest in October, November, April and June at 10.4, 10.5, 9.4 and 7.7 individuals respectively. On the other hand, CPUE put lowest in January, the coldest month, and August, the hottest month, at 0.2 and 0.3 individuals respectively. As for geographical mantle length distribution, average mantle length ranged from 6.2cm to 7.3cm at stations near the tidal channels (St. 1, 4, 5, 6, 8, 9, 10, 13, 14, 15, 18, 19 and 20), and was smaller than 6.0cm at stations located inside of bay (St. 2, 3, 7, 11, 12 and 17). In terms of geographical distribution density, CPUE showed higher than 8.0 at St.4 in Changmaeri, St.8 in Taecheonri, St.13 near Seondo, St.18 in Naeri and St.14 in western part of Tando which are located near the main tidal channels. And distribution density showed low that CPUE was lower than 5.0 individuals at stations located inside of bay (St. 1, 3, 5, 6, 7, 11, 12, 16 and 20). Through the results, the difference of distribution density reflects that distribution of Octopus minor is affected by direction of current and inflow of pollutant from land in direct. Therefore, it is considered that bottom composition of tidal flat and distribution of live food are the crucial cause of identifying the distribution characteristics of Octopus minor. For this reason, it is judged to need additional research on it.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.9-14
• /
• 2008

In the case of horizontally curved bridges, the use of curved composite box girder bridges are increased due to its functionality and for aesthetical reason. As it compared with the open section, the steel box girder bridges have advantages to resistant of distortion and corrosion. In practice the grid analysis is conducted by utilizing only the cross beam. Since the stiffness of the concrete slab is not included in the grid analysis, the cross beam is induced the distribution of the live load. In this study the affects of the radius of curvature, the number of diaphragm and cross beam to the load distribution of the curved steel box girder bridge was investigated by applying the finite element method. The results indicate that the curvature of curved bridge had a large affect of the load distribution and as the curvature was increased the load distribution factor was increased. A single diaphragm at the center of girder is important role for the load distribution effects and structural stability, but additional diaphragm did not affect it as much. The affects of the cross beam to the load distribution were investigated and its influence was minor. It can be safely concluded that the addition of cross beam does not aid the purpose of the live load distribution. And the stiffness of concrete slab for the load distribution effects should be concerned in the design of curved steel box girder bridges.

• Journal of Korea Water Resources Association
• /
• v.50 no.3
• /
• pp.211-221
• /
• 2017

In statistical hydrology, various extreme distributions such as the generalized extreme value (GEV), generalized logistic (GLO) and Gumbel (GUM) models have been widely used to analyze the extreme events. In the case of rainfall events in South Korea, the GEV and Gumbel distributions are known to be appropriate among various extreme distribution models. However, the proper probability distribution model may be different depending on the type of extreme events, rainfall duration, region, and statistical characteristics of extreme events. In this regard, it is necessary to apply a wide range of statistical properties that can be represented by the distribution model because it has two shape parameters. In this study, the statistical applicability of rainfall data is analyzed using the Burr XII distribution and the dimensionless L-moment ratio for 620 stations in South Korea. For this purpose, L-skewness and L-kurtosis of the Burr XII distribution are derived and L-moment ratio diagram is drawn and then the applicability of 620 stations was analyzed. As a result, it is found that the Burr XII distribution for the stations of the Han River basin in which L-skewness is relatively larger than L-kurtosis is appropriate, It is possibility of replacing the distribution of commonly used Gumbel or GEV distributions. Therefore, the Burr XII model can be replaced as an appropriate probability model in this basin.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1584-1588
• /
• 2018

During hyperthermia therapy, cancer cells are heated to a temperature in the range of $40{\sim}45^{\circ}C$ for a defined time period to damage these cells while keeping healthy tissues at safe temperatures. Prior to hyperthermia therapy, the amount of heat energy transferred to the cancer cells must be predicted. Among various non-invasive methods, the thermal prediction method using the specific absorption rate (SAR) is the most widely used method. The existing methods predict the thermal distribution by using a single constant for the mass density in one organ through assignment. However, because the SAR and the bio heat equation (BHE) vary with the mass density, the mass density of each organ must be accurately considered. In this study, the mass density distribution was calculated using the relationship between the Hounsfield unit and the mass density of tissues in preceding research. The SAR distribution was found using a quasi-static approximation to Maxwell's equation and was used to calculate the potential distribution and the energy distributions for capacitive RF heating. The thermal distribution during exposure to RF waves was determined by solving the BHE with consideration given to the considering contributions of heat conduction and external heating. Compared with reference data for the mass density, our results was within 1%. When the reconstructed temperature distribution was compared to the measured temperature distribution, the difference was within 3%. In this study, the density distribution and the thermal distribution were reconstructed for the agar phantom. Based on these data, we developed an algorithm that could be applied to patients.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.72-79
• /
• 2003

In reliability based design(RBD) method, the distribution characteristics of mechanical properties of material are basic input variable. Therefore, distribution type and parameters of mechanical properties should be determined accurately. Until now, the properties were derived from tests with small, clear specimens. However, the test conditions should emulate as nearly as possible the way in which the timber would be used in practice and the test results should, as closely as possible, reflect the structural end use conditions to which the timber products would be subjected. In this study, structural timbers (38mm by 140mm, 3.0m long) were graded by visual assessment of growth characteristics and defects. And then bending tests were conducted on 498 structural size timbers. For each grade, the distribution type and the parameters of mechanical properties were determined for each grade. For the determination of best-fit distribution type, comparing of square error between distribution types and KS test were conducted. Best-fit distribution type of bending strength(MOR) is weibull distribution for all grade. In case of MOE, normal distribution is best-fit.

• Journal of Power System Engineering
• /
• v.12 no.2
• /
• pp.41-47
• /
• 2008

This article deals with the stress analysis of the friction drive, which transmits the power via the rolling resistance on the contract area between the two rotating bodies. On the contact area, friction drives are normally involved with shear stress due to the transmitted force, as well as normal stress. Thus the stress analysis including the shear stress is necessary for the design of the friction drive. Hertzian results can be used to estimate the normal stress distribution and elastic deflection of the contact area, although the shear stress distribution is not well defined. In order to investigate the shear stress distribution and its effects in a friction drive, we have performed the stress analysis of the spherical continuously variable transmission(CVT) using finite element method. The spherical CVT is one of friction drives, which is used in small power applications. The numerical results show that the normal stress distribution is not affected by the transmitted shear force, and the maximal shear stress is increased in small amount along with the shear force.