• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.556-565
• /
• 2014

Objectives: This study is aimed at inquiring into the grasp of real condition of working environment and improvements by calculating the hypertension distribution consequent on job stress risk and exposure level of alleviating factors. In addition, this study is intending to estimate the hypertension distribution through socio-demographic factors and level of stressors occurring at working environment, such as high workload, low control, low support, job insecurity, long working hours, low income. Methods: This study estimated the hypertension distribution using the tertiary Korean Working Conditions Survey data, and conducted comparative analysis according to the category of individual questionnaire items using odds ratio. Result: As a result of study, it was found that in the event that working environment satisfaction is low and business & an immediate superior's attitudes are negative, the hypertension distribution was high. Particularly, it was found that physical risk factor musculoskeletal risk factor, and mental risk factor in a workplace were all increasing the hypertension distribution. Conclusions: With the aged workers' labor market participation ratio increasing, hypertension could be a major issue in the field of Occupational Safety and Health. Thus, it's necessary that the relevant employer should lower the hypertension distribution through creation of pleasant working environment and inducement of workers to improve in the relations with their superiors. As for the uppermost limit of this study, there is a limit to clarifying the mechanism of hypertension through multivariate statistics analysis because it's difficult to establish causal relationship by individual questionnaire item as the working conditions survey is made by cross-sectional study. In the follow-up research, this study is going to do research on the mechanism of hypertension through questionnaire supplementation and in-depth analysis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.103-116
• /
• 2005

Although there have been many researches to construct a database of water distribution networks using GIS, most of them were not linked with an model for the analysis of pipe networks because it is difficult to make spatial data about complex water distribution networks for building a detail model. Therefore, it is necessary to develop the method based on GIS to build geographical data for design of water distribution pipeline systems. In this study, an innovated design support technique using GIS is proposed for a hydraulic analysis model of water distribution networks. With the function of spatial analysis in GIS system, the results from a pipe network model are used to analyze the suitability of the location of pipeline network, the spatial suitability comprised the analysis of the degree of pipe age, the altitude distribution of water pressure, and the water supply system for the customer.

• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2017

Purpose : This study was conducted among 195 adults in their 20s. To analyze the impact of the slope types of the scapulae on the plantar surface of the foot, the average pressure (AP), the maximum pressure (MP), the average of local distribution values, and the average movement of the center of pressure (COP) of the different slope types of the scapulae were compared. Method : The anterior-posterior slopes of the scapulae were measured by comparing the slopes of the left and right sides of the scapulae based on the differences in the height and the slope of the coracoid process and the angulus inferior scapulae. Those whose left side of the scapulae had an anterior slope were categorized as type 1, and those whose right side of the scapulae had an anterior slope, as type 2. The average plantar pressure, the center of plantar pressure, the maximum plantar pressure, and local distribution values were analyzed using a plantar pressure analyzer of the FSA. Result : In terms of the AP of the left and right feet, there was no statistically significant difference both in types 1 and 2 on the left and right feet. The comparison results of the MP and the average of local distribution values of the two slope types of the scapulae showed that there was no statistically significant difference on the X-axis both in types 1 and 2 on the left and right feet, but that there was a large statistically significant difference on the Y-axis both in types 1 and 2. That is, the MP of the right foot of the left anterior slope type was located more on the hindfoot than that of the right anterior slope type, and the MP of the left foot of the left anterior slope type was located more on the hindfoot than that of right anterior slope type. Conclusion : This study can be used as fundamental data to predict differences in the location and size of the COP and changes in plantar pressure distribution depending on the slope types of the scapulae, and control the distribution for therapeutic purposes.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.26-31
• /
• 2015

The purpose of this paper is to measure the induced voltage of the downscaled and simulated overhead ground wire of a 22.9kV-Y distribution line. This study performed a test of the downscaled and simulated distribution line according to whether it is grounded or not and the value of the ground resistance. In order to verify the reliability of the data measured by the test, the data was analyzed using the Minitab 17 program. It was found that the induced voltage of the downscaled and simulated distribution line is influenced by the value of the ground resistance. It was also found that the ground resistance obtained at a certain point is closely related to whether electric poles are grounded or not. The analysis results of the measured test data with a statistical method showed that the Anderson Darling (AD) was analyzed to be the smallest as 0.188 when the ground resistance of the electric poles had been maintained at $10{\Omega}$. In addition, the P value analyzed to be 0.894 which is in the proximity of the theoretical value of 1 and verified the reliability of the test data. It could be seen that the data measured by the downscaled simulation test forms a linear graph. It is thought that if a distribution line is installed in the same manner as the downscaled, simulated distribution line, the mean induced voltage will be reduced and reliability will be increased.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.5
• /
• pp.671-683
• /
• 2004

This study was carried out to understand long-range transport of $SO_2$ using aircraft measurements for the identification of it's horizontal and vertical concentration and distribution pattern. Thirteen missions of aircraft measurements have been done around 37$^{\circ}$00'/124$^{\circ}$30' from October 1997 to November 2001. Concentrations of $SO_2$ was 1.5~2.0 ppb in the below mixing layer, 0.6~1.1 ppb in the above mixing layer. $SO_2$ was found to be relatively higher than marine background level, 0.08~0.2ppb, indicating the western coast being influenced by long-range transport except for the summer season. The vertical distribution of $SO_2$ was classified into 3 groups using its vertical sounding and meteorology pattern; the first is linear decay pattern, the second is exponential decay pattern, and the last is gaussian distribution pattern in the below mixing layer, 2 patterns of linear decay and gaussian distribution patterns in the upper layer. It is founded that vertical distribution pattern is strongly dependent on meteorological condition, for example atmospheric stability and predominant air flow.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.907-913
• /
• 2015

This work presents a method to predict the near magnetic field distribution on the digital switching circuit mounted on PCB using co-simulation of circuit and electromagnetic fields. The proposed method first obtains the normalized near field distribution by exciting the signal and power ports of the switching circuit using sinusoidal sources. Then the real near magnetic field distribution is determined by weighting the normalized field distribution using the current spectrum of the switching circuit. To confirm the proposed method, a switching IC with a ring oscillator and a output buffer is fabricated and measured in the form of chip-on-board. The surface magnetic field distribution is measured using a magnetic probe above the PCB and compared with the simulation results. Experimental results show the correspondence between simulation and measurement results within 10 dB up to fifth harmonics.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.111-117
• /
• 2017

The arrival time of rescue ships is very important in the event of distress. This paper presents the development of experimental data to calculate the arrival time of rescue ships. The ship's traffic probability distribution was used. Mokpo Port was selected as the area of study, and AIS data for a 1 year period were used. For the ship's traffic probability distribution, a gateline was established. The lateral range distribution was calculated and fitted to the normal distribution and two Gaussian mixture distributions (GMD2), and each parameter was extracted. After the locations of ${\mu}$, ${\mu}{\pm}1{\sigma}$ of the normal distribution and ${\mu}_1$ of the two Gaussian mixture distribution(GMD2) were set as waypoints, the location and probability were determined. A scenario was established in relation to each type of parameter. Thus, the arrival time can be calculated.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.183-189
• /
• 2009

Environmental conditions may cause the quality change of fruits during distribution after harvest. In order to prevent the damage or quality change of fruits for distribution, the characteristic of fruits affected by the environmental conditions such as temperature, humidity under various distribution conditions should be known. This research was performed to analyze how the environmental conditions affect the factors such as weight loss rate and ethylene production of the peach under several distribution conditions. Environmental conditions of the actual distributed route were evaluated and the data obtained from the conditions were used for the simulated environmental tests. Regression models of the weight loss rate and the ethylene production of peach were developed and used in predicting peach quality. The weight loss rate of the peach estimated by the ASHRAE data was shown the higher value on the transportation temperature condition than on the low and room temperature conditions. The weight loss rate and the ethylene production of the peach on the simulated distribution conditions were measured and the measured weight loss rate of peach was the smaller than the theoretically estimated one. The regression models of the weight loss rate and the ethylene production were developed respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.1-7
• /
• 2002

An experimental study was conducted to investigate the effects of leading edge extension(LEX) on the surface prssure distribution over a delta wing in a subsonic wind tunnel. Freestream velocity was 40m/sec and Reynolds number per meter was 1.7x$10^6$ with total pressure of 101Pa and total temperature of 278K. LEX changed the surface pressure distribution on the wing dramatically. Comparing with the results without LEX, the peak of pressure distribution decreased on the front chordwise location but it turned to increase on the rear chordwise location with increase of the angle of attaci. The spanwise gradient of the pressure distribution also increased in the rear chordwise location. Without LEX, the peak of pressure distribution increased and decreased irregularly with increase of the angle of attack at each chordwise location, but LEX made it increased almost linearly with increase of the angle of attack at all of the chordwise locations.

• The Korean Journal of Applied Statistics
• /
• v.24 no.6
• /
• pp.1271-1284
• /
• 2011

The entropy-based test of fit for the inverse Gaussian distribution presented by Mudholkar and Tian(2002) can only be applied to the composite hypothesis that a sample is drawn from an inverse Gaussian distribution with both the location and scale parameters unknown. In application, however, a researcher may want a test of fit either for an inverse Gaussian distribution with one parameter known or for an inverse Gaussian distribution with both the two partameters known. In this paper, we introduce tests of fit for the inverse Gaussian distribution based on the Kullback-Leibler information as an extension of the entropy-based test. A window size should be chosen to implement the proposed tests. By means of Monte Carlo simulations, window sizes are determined for a wide range of sample sizes and the corresponding critical values of the test statistics are estimated. The results of power analysis for various alternatives report that the Kullback-Leibler information-based goodness-of-fit tests have good power.