• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.87-97
• /
• 2018

Turfgrass provides various beneficial effects to our societies such as recreation, aesthetic components, and other public service. Diseases in turfgrass is the major issue, which cause quality problems in golf courses, playgrounds, parks and cultivation areas, and tremendous cost is required to prevent the diseases. Research activity and investigation for turfgrass disease remain to be further attributed when compared to other crops in Korea. In this study, we present previously reported turfgrass diseases researches, especially caused by fungal pathogens, and review the history of turfgrass research activity in Korea to contribute future turfgrass research direction. Research papers were searched and analyzed using Korea Educational and Research Information Service (www.riss.kr). More than eighty papers presented turfgrass diseases and among the papers, 50% were published in Korean Journal of Turfgrass. Half of the papers reported turfgrass diseases control. Research articles about large patch disease were the majority (36%), followed dollar spot (18%), Pythium blight (10%) and Typhular blight (8%). Number of the first disease reports in Korea were total fifteen. Total 542 fungicides have been registered in Korea to prevent turfgrass diseases and most of the fungicides were for brown patch, rust, yellow patch, dollar spot, snow mold, summer patch, anthracnose, Pythium blight, powdery mildew and algae. And we will also need to conduct ecological studies on turf diseases and to develop control methods with improved efficacy and environmentally-friend sound. Researches on epidemiology of turfgrass diseases which deals with the incidence, distribution, and interactions with other factors will be also greatly favored for precise control prescription, timing of control and use of less pesticides.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.553-558
• /
• 2012

Airborne chlorides are transported to inland by sea wind to be attached to seashore concrete structure surface then penetrated into concrete structure members. Since the surface attached chloride amount are dependent on the amount of airborne chlorides, the prediction of distribution of airborne chlorides is important information in preventing chloride corrosion problems in seashore concrete structures. The prediction of surface chloride amount from airborne chlorides environment is extremely difficult than concrete directly in contact with seawater. In addition, their penetrating tendency is different from that of concrete immersed in seawater. In this study, properties of surface and penetrated chlorides under airborne chlorides environment are investigated. Concrete specimens were manufactured and exposed to marine environment for 3 years. The specimens were analyzed at the time durations of 1, 2, and 3 years to check surface chloride amount to penetrated chloride depth. The results revealed that there were certain differences according to surface roughness of concrete and with and without washing effect due to rainfalls. The evaluation results showed that penetrated chlorides depend on amount of airborne chlorides and duration of exposure. In addition, a notable tendency of having deeper chloride penetration and higher chloride content in concrete members under long-term exposure was observed.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.633-640
• /
• 2010

This study was performed to get basic information about properties of high blaine cement for shotcrete use. Particle size distribution, setting time and compressive strength test, analysis like as SEM, DSC thermal analysis, XRD was carried out to investigate principle properties of high blaine cement. Setting time of high blaine cement was shorter and compressive strength was higher than those of ordinary portland cement (OPC). Results of analysis showed early hydration products of high blaine cement is smaller and spread widely due to increased specific surface. From the SEM observation and analysis of DSC and XRD results, it was seen that the aluminates accelerators promoted calcium aluminium hydrates while the alkali free accelerators increased ettringite and monosulfates formation. Strength and setting time measurement of cement paste with aluminate accelerator is more effective than the alkali free accelerator in reducing the setting time and increasing early strength while alkali free accelerator is more effective in increasing the strength after 7 days.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.113-120
• /
• 2005

3D reconstruction of a scene structure from un-calibrated image sequences has been long one of the central problems in computer vision. For 3D reconstruction in Euclidean space, projective reconstruction, which is classified into the merging method and the factorization, is needed as a preceding step. By calculating all camera projection matrices and structures at the same time, the factorization method suffers less from dia and error accumulation than the merging. However, the factorization is hard to analyze precisely long sequences because it is based on the assumption that all correspondences must remain in all views from the first frame to the last. This paper presents a new projective reconstruction method for recovery of 3D structure over long sequences. We break a full sequence into sub-sequences based on a quantitative measure considering the number of matching points between frames, the homography error, and the distribution of matching points on the frame. All of the projective reconstructions of sub-sequences are registered into the same coordinate frame for a complete description of the scene. no experimental results showed that the proposed method can recover more precise 3D structure than the merging method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.23-30
• /
• 2005

In this paper, OPPS(oxidized porous poly-silicon) field emitters were fabricated by using various emitter-electrode metal and these electron emission characteristics were investigated for different thermal annealing effects. The addressed OPPS field emitter with Pt/Ti emitter electrode annealed at $300^{\circ}C$-1hr showed the efficiency of $2.98\%$ at $V_{ps}$=12 V and one annealed at $350^{\circ}C$-1hr showed the highest efficiency of $3.37\%$at $V_{ps}$=16V. They are resulted from the improvement of interfacial contact characteristics of thin emitter metal to an oxidized porous poly-silicon and the decrease of electrical resistance of emitter metal. The brightness of the OPPS field emitter increases linearly in $V_{ps}$ and after oxidation process for $900^{\circ}C$-50min, the brightness of the OPPS field emitter with the as-deposited Pt/Ti emitter electrode was 3600 cd/$m^2$ at the $V_{ps}$=15 V, 6260 cd/$m^2$ at the $V_{ps}$=20 V. Thermal treatment improved the adhesion between the Ti buffer layer and the oxidized porous poly-silicon and also played an important role in the uniform distribution of electric field to the emitter electrode.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.977-983
• /
• 2007

Recently, the number of systems which utilize wireless power transmission to a receiving module in a short distance is increasing. For efficient use of receiving space, coils are wound around the ferrite core to produce electromotive force(emf) in suppling power by wireless transmission. This paper analyzed the magnetic flux density distribution in the ferrite core in magnetic field environment which is uniformly oriented along to a single axis at 125kHz. For numerical analysis, Ansoft Maxwell which is applying the FEM(Finite Element Method) method was used. We studied the variations of the gathered magnetic fluxes to the changes of the relative permeabilities of the ferrite cores. Also we calculated the magnetic flux variation by shaving the ferrite core off for the groove of coil winding. Results showed that using a small ferrite core in magnetic field at 100kHz band can increase the amount of magnetic flux $3{\sim}4 times$ than without the core. The magnetic flux decreased 23% by shaving the core 0.5 mm on the periphery of 4.75 mm radius core with the relative permeability 800.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.566-576
• /
• 2016

Inverse synthetic aperture radar(ISAR) image generated from bistatic radar(Bi-ISAR) represents two-dimensional scattering distribution of a target, and the Bi-ISAR can be used for bistatic target identification. However, Bi-ISAR has large variability in scattering mechanisms depending on bistatic configurations and do not represent exact range-Doppler information of a target due to inherent distortion. Thus, an efficient training DB construction is the most important factor in target identification using Bi-ISARs. Recently, a database construction method based on realistic flight scenarios of a target, which provides a reliable identification performance for the monostatic target identification, was applied to target identification using high resolution range profiles(HRRPs) generated from bistatic radar(Bi-HRRPs), to construct efficient training DB under bistatic configurations. Consequently, high identification performance was achieved using only small amount of training Bi-HRRPs, when the target is a considerable distance away from the bistatic radar. Thus, flight scenarios based training DB construction is applied to target identification using Bi-ISARs. Then, the capability and efficiency of the method is analyzed.

• Journal of the Economic Geographical Society of Korea
• /
• v.4 no.2
• /
• pp.79-96
• /
• 2001

This paper introduces a new type of industrial cluster developed at the CBD of Seoul. Conventionally, clusters are said to be consisted of hi-tech, often If activities, manufacturing industries or artisan craft industries with increasing vertical integration and performance usually supported by venture capitals and favorable business infrastructure, not to mention governments', be it central or local, incentive plans. The study area, Cheonggyechon region has long been a traditional CBD frame of Seoul, Korea, being troubled by deterioration, traffic jams, and environmental degradation as most inner cities experience. Recently. this region has transformed to the most dynamic and productive area not by IT industries but by apparel and fashion activities. The study of the developmental trajectory and key characteristics for this kind of industrial cluster can give us insight both for the transition of inner city and for the cluster theory. This Paper firstly briefly Profiles the growth of the Cheonggyechon region over the past decade. It then shows the current spatial and business structure of the new industrial cluster, focusing on the fact that transactions costs are reduced, the creation and flow of information improves. and the local institutions are prone to be most responsive to the new cluster's specialized needs. The third section presents the key components of the customized production-distribution-shopping cluster development process, emphasizing the localized networking. social capital, spontaneous institutionalization of associational economic climate, and cultural economy based on place-specific inertia. The paper concludes with some comments about the prospects and perils of the new industrial cluster of Seoul.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.167-174
• /
• 2001

Reflection method using ultrasonic source has been attempted to obtain the information about tunnel lining structures composed of lining, shotcrete, water barrier and voids at the back of lining. In this work, two different types of sources, i.e. single-pulse source and sweep source, can be used. Single-pulse source with short time duration has the frequency content whose amplitudes tend to be concentrated around the dominant frequency, whereas sweep source with long time duration denotes a flat distribution of relatively larger amplitude over a broad frequency band, although the peak to peak amplitude of single-pulse source wavelet is equivalent to that of sweep source one. In traditional seismic application, a single-pulse source(weight drop, dynamite) is typically used. However, to investigate the fine structure, as it is the case in the tunnel lining structure, the sweep wavelet can be also a desirable source waveform primarily due to the higher energy over a broad frequency band. For the investigation purposes of sweep source, a physical modeling is a useful tool, especially to study problems of wave propagation in the fine layered media. The main purpose of this work was using a physical modeling technique to explore the applicability of sweep source to the delineation of inner layer boundaries. To this end, a two-dimensional physical model analogous to the lining structure was built and a special ultrasonic sweep source was devised. The measurements were carried out in the sweep frequency range 10 ∼ 60 KHz, as peformed in the regular reflection survey(e.g. roll-along technique). The measured data were further rearranged with a proper software (cross-correlation). The resulting seismograms(raw data) showed quitely similar features to those from a single-pulse source, in which high frequency content of reflection events could be considerably emphasized, as expected. The data were further processed by using a regular data processing system "FOCUS" and the results(stack section) were well associated with the known model structure. In this context, it is worthy to note that in view of measuring condition the sweep source would be applied to benefit the penetration of high frequency energy into the media and to enhance the resolution of reflection events.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.373-382
• /
• 2012

The purpose of this study was to understand the change of demands in young patients and to suggest a directional shift for the pediatric dental practitioners who are facing these changes. This study collected data on new patients who had visited Chonnam National University Dental Hospital, Department of Pediatric Dentistry from 2003 to 2010 and the researchers were able to find out the following information. Total number of dental visits has been increasing since 2009 and 2010, which includes an increase of male patients in the 13~15 years age group showed significant increase and that in the 3~4 years age group showed a significant decrease. December showed the largest number of total dental visits, of which 69.6% of newly visit patients were living in Gwang-ju. Patients who had systemic diseases were 10.7% of total newly visit patients and 19.1% of patients received sedative treatment. Considering the chief complaints of new patients, 36% of patients visited because of dental caries. Regarding the dental treatment of patients, 38.4% had restoration treatment in 2003 and 30.4% had restoration treatment in 2010.