• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.464-473
• /
• 2001

Since DCT algorithm divides an image into blocks uniformly in both the spatial domain and the frequency domain, it has a weak point that it can not reflect HVS(Human Visual System) efficiently To avoid this problem, we propose a new algorithm, which combines only the merits of DCT and wavelet transform. The proposed algorithm uses the high compaction efficiency of DCT, and applies wavelet transform mode to DCT coefficients, so that the algorithm can utilize interband and intraband correlations of wavelet simultaneously After that, the proposed algorithm quantizes each coefficient based on the characteristic of each coefficient's band. In terms of coding method, the quantized coefficients of important DCT coefficients have symmetrical distribution, the bigger that value Is, the smaller occurrence probability is. Using the characteristic, we propose a new still image coding algorithm of symmetric and bidirectional tree structure with simple algorithm and fast decoding time. Comparing the proposed method with JPEG, the proposed method yields better image quality both objectively and subjectively at the same bit rate.

• Journal of Engineering Education Research
• /
• v.9 no.4
• /
• pp.71-82
• /
• 2006

To accomplish the educational objectives of a department, a system for CQI(Continuous Quality Improvement) is necessary. Improving the educational system by survey analysis is one of the most important factors for accomplishing the educational objectives. In general, survey analysis is carried out by using statistical distribution on an attribute or correlation analysis between two attributes. However, these analysis schemes have a limitation that they cannot find relations among various attributes. In this paper, an in-depth survey analysis method applying data mining techniques is presented. Data mining is a technique for extracting interesting knowledges from a large set of data. Survey from undergraduate students in the School of Computing of Soongsil University is analyzed in this paper by using a data mining tool, called Clementine. Results of Clementine analysis show the relationship between 'grade', and other attributes hierarchically, and provide useful information that can be applied in student consulting and program improvement.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.49-59
• /
• 2004

The concectration and distribution of contaminants obtained from a contaminated land investigation or an environmental geochemistry survey constitutes the basis of a decision-making process on environmental policies or of scientific researches. As the quality of data determines the reliability of the result, the investigation plan should be adjusted according to the purpose of the investigation. In general, the effort to improve the data quality had been focused mainly on the QA/QC procedures in laboratories. The rapid progress of analytical instrument has also contributed toward improving the analytical precision to a sacrificable degree. Nevertheless, in many cases, it is not the analytical precision that needs improvement for the better precision of overall measurement process: it is rather during the sampling process in the field that is responsible for the poor precision. To assess the data quality on a measured value, ISO recommends to provide information on "measurement uncertainty" along with the measured value. The measurement uncertainty in an environmental measurement context can be explained as the statistical number that expresses the degree of the uncertainty stemming from the sampling and analytical procedures. There is a cost involved in order to improve the precision of sampling and analytical methods so as to decrease the degree of measurement uncertainty. The economical point of compromise in an investigation planning can be achieved when the allowable degree of uncertainty has been set before-hand. The investigation can then be planned accordingly not to exceed the uncertainty limit. Furthermore, if the measurement uncertainty estimated from the preliminary investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the investigation should be allotted cost-effectively to reinforce the weakest link of the whole investigation process. This paper aims to present a method of estimating the level of measurement uncertainty of a measured contamination concentration at a site used as an example and to show how the estimated uncertainty can be applied to serve the particular purpose of an investigation.

• Journal of Korea Port Economic Association
• /
• v.20 no.2
• /
• pp.169-185
• /
• 2004

It is an urgent problem that Korea logistics enteprises' expansion of advance into China market and the logistics network establishment between Korea and China to back up the former are to be solved. Accordingly, the purpose of this study is to deduce the subjects to establish the logistics network between Korea and China, and to evaluate the priority order. The results of this research are as follows: First, we conducted face-to-face interviews on the advisery group in China and Korean enterprises which advanced into China, and drew out 6 promoting subjects to build the logistics network between the two. Second, the AHP model was adopted, which is a multi-criteria?multi-hierarchical decision making method, to draw out the weight and priority order of the deduced 6 promoting items. Third, the resultant priority order of the promoting subjects is as follows: No.1 - to establish the distribution & logistics support center by region(0.3900); No.2 - to support various taxes in investing the logistics business abroad(0.1980) ; No.3 - to improve the management of CIQ(0.1958); No.4 - to back up the joint-venture of logistics firms(0.1169); No.5 - to enhance trade and foreign policies to deregulate the entry into logistics markets(0.0536); No.6 - to construct the logistics information system of China(Northest Ssia)(0.0458). This paper resulted in finding out Korea logistics enterprises that have not secured their own inland-transport network in China and the actual difficulties of Korean enterprises with using the inferior network that advanced into China. These problems were developed into the analysis adopting the AHP method, and the significancy of this paper is to present the priority order of promoting problems using a sophisticated technique.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.5 s.311
• /
• pp.68-79
• /
• 2006

Electrical capacitance tomography (ECT) is a non-invasive imaging reconstruction technique that aims at visualization of cross sectional permittivity distribution of dielectric object based on the measured capacitance. There are lots of iterative image reconstruction methods to accelerate convergence rate and enhance quality of reconstructed image, Among them iterative Landweber method is one of the widely used reconstruction algorithm in En. In this paper, modified generalized Landweber method is proposed to accelerate convergence rate. In doing so, acceleration term is considered to the generalized Landweber method with shaping matrix and an optimal step length is determined analytically. Extensive computer simulations are provided to illustrate the reconstruction performance of the proposed algorithm.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.2
• /
• pp.6-12
• /
• 1998

Thin film SOI(Silicon-on-insulator) device offer unique advantages such as reduction in short channel effects, improvement of subthreshold slope, higher mobility, latch-up free nature, and so on. But these devices exhibit floating-body effet such as current kink which inhibits the proper device operation. In this paper, the SOI NMOSFET with a T-type gate structure is proposed to solve the above problem. To simulate the proposed device with TSUPREM-4, the part of gate oxide was considered to be 30nm thicker than the normal gate oxide. The I-V characteristics were simulated with 2D MEDICI. Since part of gate oxide has different oxide thickness, the gate electric field strength is not same throughout the gate and hence the impact ionization current is reduced. The current kink effect will be reduced as the impact ionization current drop. The reduction of current kink effect for the proposed device structure were shown using MEDICI by the simulation of impact ionization current, I-V characteristics, and hole current distribution.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.41-47
• /
• 1999

In this paper, we report 3D-simulations of a plasma etching process by employing cell-removal algorithm takes into account the mask shadow effect os well as spillover errors. The developed simulator haas an input interface to take not only an analytic form but a Monte Carlo distribution of the ions. The graphic user interface(GUI) was also built into the simulator for UNIX environment. To demonstrate the capability of 3D-SURFILER(SURface proFILER), we have simulated for a typical contact hole structure with 36,000($30{\times}40{\times}30$) cells, which takes about 20 minutes with 10 Mbytes memory on sun ultra sparc 1. as an exemplary case, we calculated the etch profile during the reactive ion etching(RIE) of a contact hole wherein the aspect ratio is 1.57. Furthermore, we also simulated the dependence of a damage parameter and the evolution of topography as a function of the chamber pressure and the incident ion flux.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.21-30
• /
• 1999

Halo pocket implantation in MOSFETs, which is known to be an efficient method to provent the punchthrough and threshold voltage roll-off phenomena, decreases the drain current of MOSFET devices. Although the decrease of the drain current in halo structure MOSFET is usually explained in terms of the increase of the threshold voltage, more decrease in the drain current than is predicted by the increased threshold voltage has experimentally been observed. In this work, the effect of halo doping profile on the drain current degradation is investigated in terms of the field distribution along the channel. Effective mobility model of the halo MOSFETs due to pocket implantation is presented and the degradation of the mobility is shown to be effective in the further decrease of the drain current. Present model is shown to be in good agreement with experimental results.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.5 no.1
• /
• pp.9-16
• /
• 2005

In Interior design, light is the most important factor in deciding color, texture and illumination level which are the basic factors of spatial design. To apply rendering technologies on prediction of illuminating effect, it is important to understand and analyse the basic properties of the illumination models that are local illumination model and global illumination model. The illumination models in computer graphics express the factors which determine the surface color, texture and light distribution through the reflection. The purpose of this study is to propose the best way of shading algorithm in interior space provided by the computer, based on the experimental analysis that 5 shading methods are applied to the interior space. The results of this study were as followed. 1) Local illumination models that are Lambert shading, Ground shading and Phong shading are not suitable to the prediction of interior illumination effect. 2) Ray tracing that is global illumination model could be adopted to interior illumination effects. Ray tracing is a very versatile algorithm because of the large range of lighting effects it can model. 3) Neither radiality nor ray tracing offers a complete solution for simulating all interior illumination effects. 4) Radiosity excels at rendering diffuse-to-diffuse inter-reflections and ray tracing excels at rendering specular reflections. By merging both shading techniques, that offers the best of both. Using computer technologies to simulate lighting in preliminary design stage which will provide information for designers and occupants to determine the effect of using artificial light sources at each stage of their design process. Further study in illumination analysis, prediction of illumination effect, and lighting calculation is required as computer media expands.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.3
• /
• pp.19-25
• /
• 2012

In this study, a recycling plan for waste concrete fine aggregate as fill material was researched by investigating environmental engineering properties. It is noted that the environmental influence of waste concrete fine aggregate is little since chemical level is satisfied the waste management standard. Waste concrete fine aggregate is not suitable for materials of anti-frost layer and sub-base layer since the particle-size distribution and engineering properties are not partially satisfied the quality standard. However, waste concrete fine aggregate can be recycled as materials of anti-frost layer and sub-base layer if we improve the engineering properties by mixing bigger aggregates than maximum particle size (5 mm) more than 25 percent of total weight.