• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.2
• /
• pp.243-250
• /
• 2003

Purpose : The purpose of this study was to suggest the number about the projected workforce of Certified Insurance Reviewer Nurses(CIRN) in Korea. Method : The following methods were used for this study: 1) national and international internet data were collected. 2) demand model was used for the prediction of the projected workforce of CIRN. 3) experts in insurance reviewing were contacted to get an opinion and information about the criteria of distribution and scope of CIRNs, 4) we figured out the maximum and minimum number of CIRN Korea needed as followed method, the maximum number was estimated that one CIRN would review 150 cases of Detailed Accounts for Examination and Treatment and the minimum was estimated 200 cases of it. 5) time series regression equation analysis was used for the prediction of number of CIRNs for the year 2003 to 2010. Result: 1) The prediction of CIRNs is as follows, there will be 2,313$\sim$2,827 of CIRN demanded in 2002, 2,500$\sim$3,069 in 2005 and 2,806$\sim$3,466 in 2010. 2) It is really desirable that CIRNs not only work for reviewing the detailed accounts for examination and treatment in hospital but also for inspecting allowance in individual insurance company. Conclusion : It is very desirable that the CIRN advocate the clients' rights because they will work for them satisfactory rather than other hospital experts group. But before settling the system of the CIRN in Korea, there would be its own professional role identity and a code of conduct.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.417-423
• /
• 2015

In this study, Magnetic Flux Leakage(MFL)-based inspection system was applied to detect the local fault of wire rope. To verify the feasibility of the proposed damage detection technique, an 4-channel MFL sensor head prototype was designed and fabricated. A wire rope with several types of cross-sectional damages were fabricated and scanned by the MFL sensor head to measure the magnetic flux density of the wire rope specimen. To interpret the condition of the wire rope, magnetic flux signals were used to determine the locations of the flaws. To improve the resolution of signal, the instantaneous variation value of magnetic flux was utilized. Measured signals from the damaged specimen were compared with thresholds set for objective decision making. Finally, the results were compared with information on actual inflicted damages to confirm the accuracy and effectiveness of the proposed cable monitoring method.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.197-205
• /
• 2012

In this study, we analyzed situation and length of stay(LOS) variations of inpatients with pressure ulcer using patient safety indicators developed by the United States Agency for Healthcare Research and Quality(AHRQ) and proposed management of medical quality and development of policy. The dataset was taken from 1,373 database of the hospital discharge injury survey from 2005 to 2008. Analysis method was used frequency and chi-square test, ANOVA, multiple linear regression analysis. In result, distribution of inpatients with pressure ulcer by sex were 52.5%(male), 47.5%(female), respectively and aged $65{\geqq}years$ was the highest in age group. LOS of inpatients with nervous system principal disease was the longest. Independent variables which were statistically associated with LOS of inpatients with pressure ulcer were year, sex, insurance type, bed size, operation, principal diagnosis. Therefore, hospital should develop the standardized strategy and guidelines to manage pressure ulcer inpatients efficiently and apply it into the medical information system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.1
• /
• pp.101-108
• /
• 2005

Adaptive constant false alarm rate(CFAR) algorithm is used for good detection probability as well as constant false alarm rate in clutter background. Especially, filtering technique adaptive to spatial variation is necessary for improving detection quality in non stationary clutter environment which has spatial correlation and large magnitude deviation. In this paper, we propose a two-dimensional block interpolation(TBI) adaptive CFAR algorithm that calculates the node estimate in the fred two dimensional region and subsequently determines the final estimate for each resolution cell by two-dimensional interpolation. The proposed method is efficient for filtering abnormal ejection by adopting distribution median in fixed region and also has advantage of reducing required memory space by using estimation method which gets final values after calculating the block node values. Through simulations, we show that the proposed method is superior to the traditional adaptive CFAR algorithms which are transversal or recursive in aspect of the detection performance and required memory space.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.13-19
• /
• 1998

It was shown that the bandwidth of T-shaped microstripline fed slot antenna is wider than many of the conventional feeding structures. In this paper, we proposed a new method of enhancing the bandwidth of T-shaped microstripline fed slot antenna with a shunt open stub, and analyzed this antenna by using the FDTD method. We have computed waves and electric field distribution in the time domain, and VSWR, input impedance and radiation pattern in the frequency domaim by Fourier transforming the time domain results. It was found that the bandwidth of this antenna depend on the position(L$_1$) and length(L$_2$) of a shunt open stub. When these parameters are L$_1$=30 mm and L$_2$=33mm, we obtained the maximum bandwidth at the center frequency of 2.3 GHz. From the computed results, the optimum antenna is designed and fabricated. The fractional bandwidth of this antenna was 53.9 %. The measured results were in relatively good accordance with computed values.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.111-120
• /
• 2004

This paper proposes a vector error diffusion method for smear artifact reduction in the boundary region. This artifact mainly results from a large accumulation of quantization errors. In particular, color bands with a smear artifact, the width of a few pixels appear along the edges. Accordingly, to reduce this artifact, the proposed halftoning process excludes the large accumulated Quantization error by comparing the vector norms and vector angles between the error-corrected vector and eight primary color patches. When the vector norm of the error corrected vector is larger than those of eight primary color patches, the quantization error vector is excluded from the quantization error distribution process. In addition, the quantization error is also excluded when the angle between eight primary color patches and error corrected vector is large. As a result, the proposed method enables a visually pleasing halftone pattern to be generated by all three color separations into account in a device- independent color space and reduces smear artifact in the boundary regions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.9-19
• /
• 2002

By using the thermionic emission model, the L-I-V(power-current-voltage) characteristics of a SCH(seperate confinement heterostructure) QW(quantum well) laser diode is analytically derived. We derived the relationships between the bulk carrier density of SCH regions and the confined carrier density of QW. The L-I-V characteristics is derived analytically by using current continuity equations. Solving the ambipolar diffusion equation under the condition of high level injection and charge neutrality, the current distribution in the SCH regions is considered. Results showed that the major factor affecting the laser I-V characteristics was the change of potential barrier at the cladding-SCH interface. Also the series resistance of a laser diode was decreased and the carrier injection was increased by increasing the forward flux of injection current from cladding to SCH region.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.73-84
• /
• 2002

Fast and accurate new capacitance determination methodology for non-uniform complicated multi-layer VLSI interconnects is presented. Since a capacitance determination of intricate multi-layer interconnects using 3-dimensional field-solver is not practical, quasi-3-dimensional methodology is presented. Interconnects with discontinuity (i.e., bend structure and different spacing between lines, etc.) are partitioned. Then, each partial capacitance of divided parts is extracted by using 2-dimensional extraction methodology. For a multi-layer interconnects with shielding layer, the system can be simplified by investigating a distribution of charge in it. Thereby, quasi-3-dimensional capacitance for multi-layer interconnects can be determined by combining solid-ground based 2-dimensional capacitance and shielding effect which is independently determined with layout dimensions. This methodology for complicated multi-layer interconnects is more accurate and cost-efficient than conventional 3-dimensional methodology It is shown that the quasi-3-dimensional capacitance methodology has excellent agreement with 3-dimensional field- solver-based results within 5% error.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.3 s.309
• /
• pp.59-66
• /
• 2006

In this thesis, we propose a new 3D shape descriptor. The proposed descriptor measures geometric characteristics by using the shortest path on surfaces. The descriptor is robust against a change of local posture. We measure the geometric characteristics of 3D object through a new shape function to construct the shape distribution. The proposed shape function is the shortest path shape function. The shape function measures the distance between two points on the surface of a 3D object. We evaluate the performance of the proposed method, compared with the previous method. The precision of retrievals improved by 23% in the case of articulated objects and is improved by 12% in the case of general objects.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.169-175
• /
• 2006

In this paper, a microstrip patch antenna with the T-shaped slits is designed and fabricated for GPS. The resonant frequency of the microstrip patch antenna with the slits is lower than that of a microstrip patch antenna without the slits so it can be reduced the size of patch. In order to calculate resonant frequency of the microstrip patch antenna with the slits, the resonant frequency formulas are derived from the surface current distribution on microstrip patch antenna. Using the Ensemble 6.0 simulation tool, the accuracy of approximate equations is verified. The microstrip patch antenna with the slits is designed by using these equations. The size of the designed antenna with T-shaped slits can be reduced to 29% compared with that without the slits. The microstrip patch antenna with slits have a very narrow bandwidth. In order to improve the narrow bandwidth of microstrip patch antennas with the slits, a microstrip patch antenna with rectangular slot is proposed. As the result of the measurements, the resonant frequency of the proposed microstrip patch antenna with the T-shaped slits is 1.575GHz and the bandwidth is about 50MHz.