• Journal of the Korean GEO-environmental Society
• /
• v.16 no.8
• /
• pp.21-35
• /
• 2015

Electrical resistivity survey (2D and 3D) were employed for detection of possible weak zone of core zones of three central core earth-rockfill dams in Korea. In the 2D results, the core zones is lower resistivity zone with less than $50{\sim}400ohm{\cdot}m$, and the basement is relatively higher resistivity zone with over $1,000ohm{\cdot}m$. In the 3D results, especially, the weak zone with under $100ohm{\cdot}m$ was detected spatial distribution area in the dam. We also drilled boreholes to collect soil samples of core zones of each dam. Water was not used during boring, because water for rotary wash boring could cause structural damages in earth dams. We found that the soil samples of core zones from all of the boreholes correspond to CL (USCS), but we also found that the fluidized or water-saturated soil samples were found in lower resistivity zones. Therefore, the electrical resistivity survey and drilling method without water are a quick and efficient method for structural-health evaluation which is detection of possible weak zones in earth core rockfill dams.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.202-210
• /
• 2015

The low dose radiation is done for a long period, thus researchers have to know the exact dose distribution for the irradiated mouse. This research has been conducted in order to find out methods in transmitting an exact dose to mouse in a mouse irradiation experiment carried out using $^{137}Cs$ irradiation equipment installed in the DIRAMS (Dongnam Institution of Radiological & Medical Sciences) research center. We developed a single mouse housing cage and shelf with adjustable geometric factors such as distance and angle from collimator. The measurement of irradiated dose showed a maximal 42% difference of absorbed dose from the desired dose in the conventional irradiation system, whereas only 6% difference of the absorbed dose was measured in the self-developed mouse apartment system. In addition, multi mice housing showed much difference of the absorbed dose in between head and body, compared to single mouse housing in the conventional irradiation system. This research may allow further research about biological effect assessment for the low dose irradiation using the self-developed mouse apartment to provide more exact doses which it tries to transmit, and to have more reliability for the biological analysis results.

• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2017

As per current seismic design codes, diagonally reinforced coupling beams are restricted to coupling beams having aspect ratio below 4. However, a grouped diagonally reinforcement detail makes distribution of steel bars in the beam much harder, furthermore it may result in poor construction quality. This paper describes the experimental results of concrete coupling beam reinforced with high-strength steel bars (SD500 & SD600 grades). In order to improve workability for fabricating coupling beams, a headed large diameter steel bar was used in this study. Two full-scale coupling beams were fabricated and tested with variables of reinforcement details and aspect ratio. To reflect real behavior characteristic of the beam coupling shear walls, a rigid steel frame system with linked joints was set on the reaction floor. As a test result, it was noted that cracking and yielding of reinforcement were initially progressed at the coupling beam-to-shear wall joint, and were progressed to the mid-span of the coupling beam, based on the steel strain and failure modes. It was found that the coupling beams have sufficient deformation capacity for drift ratio of shear wall corresponding to the design displacement in FEMA 450-1. In this study, the headed horizontal steel bar was also efficient for coupling beams to exhibit shear performance required by seismic design codes. For detailed design for coupling beam reinforced with high-strength steel, however, research about the effect of variable aspect ratios on the structural behavior of coupling beam is suggested.

• Korean Journal of Oriental Medicine
• /
• v.15 no.2
• /
• pp.51-61
• /
• 2009

Objective: Much has been known that the systematical theory of acupuncture was developed from stone needle as therapeutic tools for orthopedic diseases in ancient times. Stone needle is very old therapeutic method like moxibustion and has been recognized that it was developed since the Stone Age in China so far. In the present study, it was examined for the origination and formation of stone needle based on stone relics of the Stone Age in Korean Peninsular, the medical and geographical literatures. Materials and methods: The facts of stone needle was examined and arranged on the ancient medical or geographical literatures such as The Yellow Emperor's Canon Internal Medicine, Shanhaijing as an ancient geographical book, etc. The clan societies and family related to an origination of stone needle was chased together with their cultural characteristics and origination. The stone relics which have been digged out of historic sites in the North-East Asia were examined for a relevance to stone needle. Results: In The Yellow Emperor's Canon Internal Medicine, it was referred to the stone needle that originated from a fishery zone related to the east coast district in North-East Asia. Through the examination of Shan Hai Jing as an ancient geographical book and its historical reviews, a Go-yi clan society who keep Go's family tree dealt well with the stone needle and jewels including jade in the North-East Asia before the publication periods of The Yellow Emperor's Canon Internal Medicine, and is comprised in the culture of Dong-yi clan society but not the Chinese culture. The obsidian stones, which have been digged out of historical sites in the North-East Asia since the Stone Age, are originated from volcanic areas combined with seashore that seems to be Baekdu mountain district in Korea and Kyushu district in Japan. Furthermore, obsidian stone tools which were found out at Laodung peninsula and the Korean peninsula are archeologically similar to the stone needle with regards to the shape, size and dual-use. In addition, specific obsidian stone tools have been used in orthopedic surgery as well-crafted obsidian blades have a cutting edge up to five times sharper than high-quality steel surgical scalpels. Conclusion: The origin of obsidian stone needle is well corresponded to the explanation about that of the stone needle. It is suggested that the stone needle which influenced in completion of acupuncture and Meridian theory in China seems to be an obsidian stone, and distribution of obsidian stone needle has been closely connected to Dong-yi clan society which are lived in the North-East Asia including Baekdu-mountain district.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.369-375
• /
• 2015

We investigated the prevalence of fungi isolated from a university-affiliated hospital during 6 years (2006-2011) to provide relevent information for the patient management. The general characteristics of the clinical isolates and gender, age, and type of specimens were analyzed. Among a total of 163,530 requested samples to culture for the Laboratory of Clinical Microbiology, Department of Laboratory Medicine, Gyeongsang National University Hospital in the Republic of Korea, 5,387 (3.3%) showd positive results for fungi. The most prevalent isolates were Candida albicans 41.9%, Candida glabrata 15.5%, and Candida tropicalis 14.6%. Total isolates of fungi increased from 526 in 2006 to 1,145 in 2011. They were most commonly isolated from sixties (27.0%) and seventies (26.5%). The most common clinical specimen was urine (44.8%). Males (52.4%) were slightly more than females (47.6%). In the future, a nationwide survey and additional antifungal convergence drugs susceptibility results will provide more useful information.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.417-427
• /
• 2016

This paper is the first investigation of the steady flow characteristics of an SI engine with a semi-wedge combustion chamber as a function of the port shape. For this purpose, the planar velocity profiles were measured at the 1.75B position by particle image velocimetry. The flow patterns were examined with both a straight and a helical port. Two swirls were observed up to 4 mm valve lift with the straight port and up to 2 mm with the helical one; however, only one swirl was present after these lifts. The flow characteristics changed suddenly between 4 and 5 mm lift in the straight port; on the other hand, the change with lift was gradual with the helical port - the transition points between flow regimes were different with the port shapes. In addition, the centers of the swirls were relatively far from the cylinder center so that the effect of eccentricity may not be negligible at 1.75B, regardless the shape. The eccentricity values with the straight port were especially high - over 0.5 for all lifts. Finally, real velocities were found to be much lower than those predicted by the assumption of ISM evaluation, with the profiles differing qualitatively as well.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.25-30
• /
• 1997

Physical and magnetic behaviors of reduced Co-Zn-Ti-Sn substituted Ba-ferrite particles with hydrogen are different from those of reduced-pure Ba-ferrite particles. The coercivity of substituted Ba-feffite particles shows a peaking effect with the reduction temperature ranging from 250 to 520 $^{\circ}C$, while the coercivity of pure Ba-ferrite decreases monotonically. The reduction process of substituted Ba-ferrite has been found to be devided into three steps. At the first and second steps, the magneto-plumbite structure maintained. When the reduced-substituted Ba-ferrite particles are reoxidized, the coercivity is reversible at the first step but irreversible at the second step. During the third step of reduction process above 410 $^{\circ}C$. The magneto plumbite structure was collapsed with formation of $\alpha$-Fe and $BaFeO_{3-x}$ phases and consequently the coercivity distribution is broaden and the coercivity irreversible. The coercivity and saturation magnetization decreases and increases up to 130 emu/g respectively. In this study, it is found that the substituted elements prevent the magneto-plumbite structure from collapse during the reduction process and furthermore migrate from the magnetic sites of $2a+4f_{IV}$, 2b, and 12k to $4f_{VI}$ and 12k'. An increase in the coercivity before the collapse of magneto-plumbite structure is attributed to the migration of cations in hexagonal Ba-ferrite structure.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1978.06a
• /
• pp.5.2-6
• /
• 1978

The prognosis of the laryngeal diseases is highly dependent on the early diagnosis and treatment. The biopsy finding is inevitable for the cofirmed diagnosis. A clinico-statistical survey of the biopsy result of the larynx in 142 cases was done at the Department of the Otolaryngology Seoul National University Hospital during a period of 3 yrs from 1973 to 1975. Results are as follows 1. Of the 142 cases, 109 cases (76.8%) were males and 33 cases (23.2%) females. Sex ratio was 3.3 : 1. 2. Age distribution shows 41 cases (28.8%) in 5th decade, 41 cases (28.9%) in 6th decade. 3. Chief complaint was hoarseness 127 cases (89.4 %), dysphagia 7 cases (4.9%) and sore throat, dyspnea etc. The time lag from the onset of hoarseness to the hospital was 2∼6 Months, 56 cases (44.0%), 6 Months∼l yrs, 34 cases (24%), within 2 Months, 17 cases (13.4%) and 15 cases (11.8%) were over 3yrs. Average time lag was 8.1 Months. 4. The site of laryngeal biopsy was 76 cases (53.3 %) from ture vocal cord, 23 cases (16.2%) from false vocal cord, and 19 cases (13.3%) from epiglottis. 5. Biopsy result was carcinoma in 69 cases (48.6%), laryngeal nodule in 20 cases (14.0%), laryngeal tuberculosis in 12 cases (8.4%) and non specific inflamation in 7 cases (5.0%). 6. 13.4% of the clinically impressed laryngeal carcinoma proved to be laryngeal tuberculosis, nonspecific inflammation etc.

• International Commerce and Information Review
• /
• v.14 no.4
• /
• pp.61-88
• /
• 2012

Korea exported the passenger cars(HS 8703) such as key export item 41billion dollars in 2011. But the Korea's representative enterprises which bound forward in the global markets, have a tough time in the Japanese markets alone, and especially, they hardly sell key items such as automobiles. Japan is the third largest automobile market sold annually 5 millions, despite its long-term depression. At this time of point, analyzing the competition structure of the automobile market and proposing the strategies of the Korean enterprises's export to Japan would be a great academic contribution. This study analyzed the Japanese automobile market by the method of upper enterprises' Concentration Ratio($CR_k$) based on J. S. Bain's SCP paradigm and the literature study on the characteristics of the Japanese market by Itami Hiroyuki. As a result, in the Japanese automobile market, it is very likely that there exist market dominating enterprises, but at the same time, the movement of change also could be grasped between Japanese car makers. Accordingly, the cross-leveraging distribution strategy, brand strategy and Japan specification(designed for Japan) development strategy of the Korean enterprises' export to Japan which can respond to the change of the Japanese automobile markets were proposed.

• Korean Journal of Environment and Ecology
• /
• v.25 no.4
• /
• pp.590-600
• /
• 2011

The research was carried out for prediction of the potential habitats of warm-temperate evergreen broad-leaved trees under the current climate(1961~1990) and three climate change scenario(2081~2100) (CCCMA-A2, CSIRO-A2 and HADCM3-A2) using classification tree(CT) model. Presence/absence records of warm-temperate evergreen broad-leaved trees were extracted from actual distribution data as response variables, and four climatic variables (warmth index, WI; minimum temperature of the coldest month, TMC; summer precipitation, PRS; and winter precipitation, PRW) were used as predictor variables. Potential habitats(PH) was predicted 28,230$km^2$ under the current climate and 77,140~89,285$km^2$ under the three climate change scenarios. The PH masked by land use(PHLU) was predicted 8,274$km^2$ and the proportion of PHLU within PH was 29.3% under the current climate. The PH masked by land use(PHLU) was predicted 35,177~45,170$km^2$ and increased 26.9~36.9% under the three climate change scenarios. The expansion of warm-temperate evergreen broad-leaved trees by climate change progressed habitat fragmentation by restriction of land use. The habitats increase of warm-temperate evergreen broad-leaved trees had been expected competitive with warm-temperate deciduous broadleaf forest and suggested the expand and northward shift of warm-temperate evergreen broad-leaved forest zone.