• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.249-258
• /
• 2006

In this letter, we propose a novel printed helix antenna for RFID reader in UHF band. The printed strip line of the antenna is first wound up outside a polygonal shaped layer and then the winding continues on an inner layer to control the overall gain and the radiation pattern. In addition, the winding pitch angles on each layer have either negative or positive values resulting in the broad CP bandwidth. The detail structure of the antenna was optimized using Pareto genetic algorithm(GA), so as to obtain excellent performances for RFID reader antennas. The optimized two-layered polygonal helix was fabricated on the cardboard of a flexible substrate and the performances were measured and compared with the simulations. The fabricated antenna was made up of copper tape which can adhere to a flexible cardboard and had 21.4 % matching bandwidth, 31.9 % CP bandwidth, readable range of $5.5m^2$ with kr=3.2. Also based on the current distribution of the strip line of the antenna and sensitivity of the antenna bents points, we confirmed that the antenna has the quarter-wave transformer near the feed for the broad matching bandwidth and radiates the traveling wave for the broad CP bandwidth using the bent strip line.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.698-705
• /
• 2017

Environmental impact of a mobile phone charger containing recycled plastic was quantified using LCA and the environmental benefits from the use of recycled and virgin plastic were compared. The assessment considers potential environmental impacts across the whole life cycle of the charger including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages and quantified six environmental impact categories; Abiotic depletion; Acidification; Eutrophication; Global warming; Ozone layer depletion; and Photochemical oxidants creation. The study showed that the environmental impacts of the use stage accounted for 94.4% and 70% in the resource depletion and global warming impact categories, respectively, and the environmental impacts of the pre - manufacturing stage accounted for more than 98% in the other impact categories. The main cause of the environmental impacts in the use stage was electricity consumed by the charger. The main cause in the pre-manufacturing stage was PBA (Printed Board Assembly) and external case manufacturing. In order to quantify the environmental benefits of recycled PC (Polycarbonate) in the exterior case, the environmental impacts of 1 kg production of recycled PC and virgin PC were evaluated. The environmental impact on the abiotic depletion of the recycled PC is estimated to be 30% compared to the virgin PC, and the impacts on the other impact categories of the recycled PC were less than 5% of the virgin plastic. Sensitivity analysis was performed for 12 items including site data and assumptions made. The sensitivity of each item was less than 10%. The results of this study confirm that designing compact and light PBA, improving charging efficiency, and use of recycled plastic are important design factors to reduce the environmental impact of a charger.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.4
• /
• pp.415-430
• /
• 2015

Since the late 1990s Vinacafe has gone through strategic changes in corporate governance and managements due to an increase in the introduction of coffee MNCs, a growth of global demands in sustainable coffee, aging coffee tree, and the deterioration of coffee production with climate changes in Vietnam. Vinacafe has attempted to cope with these kinds of changes through strategies for equitization. Therefore, the main aim of this paper is to identify strategies for enhancing the competitiveness of the Vietnamese coffee industry by investigating changes in corporate governance and processes of coffee production and distribution. The equitization of Vinacafe has led to the enhancement of coffee competitiveness in two perspectives. Firstly, as it has decentralized decision-making from headquarter, subsidiaries have become able to strength their competitiveness themselves by introducing new technologies, improving coffee quality, and encouraging the introduction of eco-friendly production methods through cooperative relationships with stakeholders involved in coffee production and distributions in Vietnam. Secondly, it has also enhanced competitiveness through the diversification and effectiveness of coffee managements by intensifying the flexibility of contract with coffee farmers and diversifying coffee sales and supply chains in Vietnam.

• Applied Microscopy
• /
• v.2 no.1
• /
• pp.39-46
• /
• 1972

There are many kinds of microscopes suitable for general studies; optical microscopes(OM), conventional transmission electron microscopes (TEM), and scanning electron microscopes(SEM). The optical microscopes and the conventional transmission electron microscopes are very familiar. The images of these microscopes are directly formed on an image plane with one or more image forming lenses. On the other hand, the image of the scanning electron microscope is formed on a fluorescent screen of a cathode ray tube using a scanning system similar to television technique. In this paper, the features and some applications of the scanning electron microscope will be discussed briefly. The recently available scanning electron microscope, combining a resolution of about $200{\AA}$ with great depth of field, is favorable when compared to the replica technique. It avoids the problem of specimen damage and the introduction of artifacts. In addition, it permits the examination of many samples that can not be replicated, and provides a broader range of information. The scanning electron microscope has found application in diverse fields of study including biology, chemistry, materials science, semiconductor technology, and many others. In scanning electron microscopy, the secondary electron method. the backscattererd electron method, and the electromotive force method are most widely used, and the transmitted electron method will become more useful. Change-over of magnification can be easily done by controlling the scanning width of the electron probe. It is possible. to continuously vary the magnification over the range from 100 times to 1.00,000 times without readjustment of focusing. Conclusion: With the development of a scanning. electron microscope, it is now possible to observe almost all-information produced through interactions between substances and electrons in the form of image. When the probe is properly focused on the specimen, changing magnification of specimen orientation does not require any change in focus. This is quite different from the conventional transmission electron microscope. It is worthwhile to note that the typical probe currents of $10^{-10}$ to $10^{-12}\;{\AA}$ are for below the $10^{-5}$ to $10^{-7}\;{\AA}$ of a conventional. transmission microscope. This reduces specimen contamination and specimen damage due to heatings. Outstanding features of the scanning electron microscope include the 'stereoscopic observation of a bulky or fiber specimen in high resolution' and 'observation of potential distribution and electromotive force in semiconductor devices'.

• ALGAE
• /
• v.23 no.4
• /
• pp.335-342
• /
• 2008

Seasonal and vertical variations of seaweed biomass were examined at Woejodo and Jusamdo of western sea, Korea from July 2006 to April 2007. Annual seaweed biomass was 198.27 g m$^{-2}$ in wet weight at Woejodo and 417.34 g m$^{-2}$ at Jusamdo, respectively and biomass of intertidal zone was greater than that of subtidal zone at Jusamdo sites. Seaweeds distributed vertically from mid intertidal to 5 m of subtidal zone at Woejodo and from high intertidal to 10m of subtidal zone at Jusamdo. Seaweed biomass and species number were maximal at lower intertidal zone (27 species, 365.43 g m$^{-2}$) of Woejodo and at mid intertidal zone (26 species, 684.18 g m$^{-2}$) of Jusamdo. Seasonal biomass varied from 136.73g m$^{-2}$ in autumn to 249.33 g m$^{-2}$ in winter at Woejodo and from 353.37 g m$^{-2}$ in autumn to 482.07 g m$^{-2}$ in summer at Jusamdo. Dominant species was Sargassum thunbergii showing highest annual biomass (Woejodo, 94.68 g m$^{-2}$ Jusamdo, 228.59 g m$^{-2}$) among all seaweeds and finding at various shore levels during the study period. Subdominant species were Corallina pilulifera and Gracilaria textorii at Woejodo, and were Sargassum fusiformis and Chondria crassicaulis at Jusamdo. Thus, we can conclude that Jusamdo shore is better place than Woejodo based on seaweed biomass and vertical distribution, and S. thunbergii is the representative species of the two islands.

• Journal of Veterinary Clinics
• /
• v.20 no.3
• /
• pp.302-307
• /
• 2003

Although, in human medicine, strains of methicillin-resistant staphylococi have become the most important causative agents of nosocomial infections, studies on the small animals are very. limited. The aim of this study was to determine mecA gene and susceptibility to antibiotics of staphylococci strains isolated from clinically ill or healthy dogs and cats, during the period August 2002-July 2003. A total of 136 staphylococci (87 coagulase-positive and 49 coagulase-negative) were investigated for antibiotic resistance, using disk diffusion and minimum inhibitory concentration (MIC) test. The mecA gene was detected using the polymerase chain reaction. The isolates belonged to the species S. aureus (53 isolates), S. intermedius (34 isolates), S. epidermidis (26 isolates) and other coagulase-negative staphylococci (CNS, 23 isolates). Of the 136 isolates, 43 (31.6%) were mecA-positive and the frequency of the ,presence of mecA gene varied among the different species. All S. aureus strains were mecA-negative and were found to be susceptible, with an oxacillin MIC $\leq$1 $\mu\textrm{g}$/ml. Five (13.6%) isolates of 36 that exhibited oxacillin resistance on the MIC testing were found to be mecA-negative, suggesting not all mecA-positive strains may be an oxacillin resistant. However, the mecA presence of the strains was correlated with high oxacillin resistance: 71.4% (10 isolates of 14; P < 0.001) for mecA-positive S. intermedius and 72.4% (21 isolates of 29; P < 0.001) for mecA-positive CNS isolates. About 69% (94 isolates of 136) showed resistance to at least one drug, and 22.8% (31 isolates) were resistant to four or more different drug classes. Resistance (36 isolates, 71.7%) to penicillin G was a common finidng. This study suggest that the mecA-positive staphylococci are prevalent in small animals, and selection of antibiotics to treat infections caused by mecA-positive staphylococci may be very limited because of multi-drug resistance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.884-891
• /
• 2016

A secondary injection system in a diesel engine has benefits: it can be controlled independently without interrupting engine control, it can be adapted to various layouts for exhaust systems, and it pose no reductant dilution problems compared to post injection systems in the combustion chamber or other supplemental reductant injections. In a secondary injection system, the efficiency of the catalyst depends on the method of reducing the supply. The reductant needs to be maintained and optimized with constant pressure, the positions and angles of injector is a very important factor. The concentration and amount of reductant can be changed by adjusting secondary injection conditions. However, secondary injection is highly dependent upon the type of injector, injection pressure, atomization, spray technology, etc. Therefore, it is necessary to establish injection conditions the spray characteristics must be well-understood, such as spray penetration, sauter mean diameter, spray angle, injection quantity, etc. Uniform distribution of the reductant corresponding to the maximum NOx reduction in the DeNOx catalyst system must also assured. With this goal in mind, the spray characteristics and impingement plate types of a secondary injector were analyzed using visualization and digital image processing techniques.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.41-41
• /
• 2015

Oomycetes belong to the kingdom Straminipila, a remarkably diverse group which includes brown algae and planktonic diatoms, although they have previously been classified under the kingdom Fungi. These organisms have evolved both saprophytic and pathogenic lifestyles, and more than 60% of the known species are pathogens on plants, the majority of which are classified into the order Peronosporales (includes downy mildews, Phytophthora, and Pythium). Recent phylogenetic investigations based on DNA sequences have revealed that the diversity of oomycetes has been largely underestimated. Although morphology is the most valuable criterion for their identification and diversity, morphological species identification is time-consuming and in some groups very difficult, especially for non-taxonomists. DNA barcoding is a fast and reliable tool for identification of species, enabling us to unravel the diversity and distribution of oomycetes. Accurate species determination of plant pathogens is a prerequisite for their control and quarantine, and further for assessing their potential threat to crops. The mitochondrial cox2 gene has been widely used for identification, taxonomy and phylogeny of various oomycete groups. However, recently the cox1 gene was proposed as a DNA barcode marker instead, together with ITS rDNA. To determine which out of cox1 or cox2 is best suited as universal oomycete barcode, we compared these two genes in terms of (1) PCR efficiency for 31 representative genera, as well as for historic herbarium specimens, and (2) in terms of sequence polymorphism, intra- and interspecific divergence. The primer sets for cox2 successfully amplified all oomycete genera tested, while cox1 failed to amplify three genera. In addition, cox2 exhibited higher PCR efficiency for historic herbarium specimens, providing easier access to barcoding type material. In addition, cox2 yielded higher species identification success, with higher interspecific and lower intraspecific divergences than cox1. Therefore, cox2 is suggested as a partner DNA barcode along with ITS rDNA instead of cox1. Including the two barcoding markers, ITS rDNA and cox2 mtDNA, the multi-locus phylogenetic analyses were performed to resolve two complex clades, Bremia lactucae (lettuce downy mildew) and Peronospora effuse (spinach downy mildew) at the species level and to infer evolutionary relationships within them. The approaches discriminated all currently accepted species and revealed several previously unrecognized lineages, which are specific to a host genus or species. The sequence polymorphisms were useful to develop a real-time quantitative PCR (qPCR) assay for detection of airborne inoculum of B. lactucae and P. effusa. Specificity tests revealed that the qPCR assay is specific for detection of each species. This assay is sensitive, enabling detection of very low levels of inoculum that may be present in the field. Early detection of the pathogen, coupled with knowledge of other factors that favor downy mildew outbreaks, may enable disease forecasting for judicious timing of fungicide applications.

• The Korean Journal of Mycology
• /
• v.43 no.4
• /
• pp.231-238
• /
• 2015

Genome-wide reanalyzed data of 25 Flammulina strains were compared against the reference genome (KACC42780) to establish a genome-wide single nucleotide polymorphism (SNP). The rate of mapping differences between the strains reflected in the strain variation in its result. Genome-wide SNPs distribution divided into types of homozygous SNP and heterozygous SNP moreover all of the strains demonstrated a wide variation in all of the regions. In the further study of topological relationship between the collected strains, phylogenetic tree was separated into 3 major groups. Group I contained F. velutipes var. related strains of ASI 4062, 4148, 4195. Group 2 contained strains that are different species of ASI 4188 F. elastica, ASI 4190 F. fennae, and ASI 4194 F. rossica. The other 19 strains F. velutipes were classified as a single group. However, further experiment to discriminate its genetic relationship between the white group and brown group did not verify its validity. The inferred tree exhibited a phylogenetic relationship between Korea white fruitbody forming strains of ASI 4210, 4166, 4178 and Japan white fruitbody forming strains of ASI 4209, 4167 confirmed to be genetically closely related.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.467-471
• /
• 2011

PET bottle is manufactured by blow molding the preform, which is molded by injection molding. The neck part of the preform of PET bottle for juice or grain-based beverage is crystallized before blowing to improve heat resistance at the entrance of the bottle. However, residual stress, developed during injection molding of preform, prevents the crystallization. In order to release the residual stress in the preform, the preform is annealed after the injection molding. If the residual stress is reduced by optimizing the injection molding conditions of preform the annealing time would be shortened. In this study, the optimum conditions for minimizing the residual stress and increasing dimensional accuracy of the injection molded preform are suggested through CAE analysis. In order to optimize the molding conditions, minimizing residual stress and shrinkage, computer simulations have been carried out with help of design of experiment scheduling. Injection temperature, initial packing pressure and filling time were selected for control parameters. Residual stress was affected by injection temperature and filling time. Shrinkage was affected by injection temperature. It was found that maximum residual stress, distribution of residual stress and shrinkage were decreased by 22%, 40% and 25%, respectively at an optimum molding condition compared with the results of previous molding condition.