• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.1
• /
• pp.43-51
• /
• 2010

Purpose : The purpose of this study was to compare plantar pressure distribution between affected side and unaffected side and to analyze plantar pressure distribution of affected side according to the extent of hemineglect in the adult hemiplegia. Methods : Twenty-five hemiplegia participated in this study. The analysis of plantar pressure distribution was conducted by the F-scan system, and the extent of hemineglect was evaluated with line-bisection test. While the subject walked about 10 meters in their comfortable speed the plantar pressure was evaluated and stored. Results : Total contact area, AP CoP trajectory, contact pressure of mid-foot of the affected side were significantly different from the unaffected side. Total contact area, AP CoP trajectory and contact pressure of mid-foot were smaller than those of unaffected side. In the comparison among the group according to the extent of hemineglect, AP CoP trajectory of subject who has severe hemineglect was significantly different from the patient that has no hemineglect and it was shorter than that of no hemineglect. Conclusion : The plantar pressure distribution was generally different between affected side and unaffected side and the hemineglect affected negatively the patient to move CoP forwardly while walking. Accordingly, it will help the clinician to understand the hemineglect which has an effect on abnormal walking and to intervent the hemiplegia who has a neglection to the affected side.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.559-569
• /
• 2004

The present study attempts to identify the differences in consumer information source, shopping orientation, and store image in the purchase of cosmetics in adult women at the age of 20 or more according to the distributions channels: department stores, specialty stores, discount stores and direct mails. From October 3 to 13, a survey was conducted to 1,200 adult women who visited each channel and who would understand the purpose of this study and complete the questionnaire. 300 sheets were distributed to each of the channels under investigation, and a total of 1,116 questionaaires were used in the final analysis. Using the statistical package, SPSS WIN 10.0, factor analysis, ANOVA, and Duncan's post-hoc test were carried out. The result are as follows: 1. There was a difference in the demographical characteristics of the consumers according to the distribution channels for cosmetics. 2. There was a differen co in the shopping orientations of the consumers according to the distribution channels for cosmetics. 3. There was a difference in the information sources of the consumers according to the distribution channels for cosmetics. 4. There was a difference in the store images perceived by the consumers according to the distribution channels for cosmetics.

• Structural Engineering and Mechanics
• /
• v.60 no.2
• /
• pp.237-249
• /
• 2016

There are constraints on truck weight, axle configurations and size imposed by departments of transportation around the globe due to structural capacity limitations of highway pavements and bridges. In spite of that, freight movers demand some vehicles that surpass the maximum size and legal weight limits to use the transportation network. Oversized trucks serve the purpose of spreading the load on the bridge; thus, reducing the load effect on the superstructure. For such vehicles, often a quick structural analysis of the existing bridges along the traveled route is needed to ensure that the structural capacity is not exceeded. For a wide vehicle having wheel gage larger than the standard 1830 mm, the girder distribution factors in the design specifications cannot be directly used to estimate the live load in the supporting girders. In this study, a simple approach that is based on finite element analysis is developed by modifying the AASHTO LRFD's girder distribution factors for slab-on-steel-girder bridges to overcome this problem. The proposed factors allow for determining the oversized vehicle bending moment and shear force effect in the individual girders as a function of the gage width characteristics. Findings of the study showed that the relationship between the girder distribution factor and gage width is more nonlinear in shear than in flexure. The proposed factors yield reasonable results compared with the finite element analysis with adequate level of conservatism.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.64
• /
• pp.187-210
• /
• 2014

As port functions change to act as an economic catalyst and take on a central position in industries engaged in international trade, port hinterland has become a significant component in international shipping. The success of port hinterland as a strategic base of logistic activities critically depends on location selection factor for international distribution center that links elements of global supply chain management. By examining multi-measurement items empirically, this paper analyzed location selection factor for international logistics distribution center in port hinterland, and evaluated Busan new port hinterland from the user's perspective. Employing exploratory factor analysis, the results revealed that the model structured around five factors incorporating geo-location and accessibility, availability, political supports, cost factors, and quality of business environment is valid and reliable in the context of the location selection factors for logistics distribution center in the context of port hinterland operations. The evaluation of Busan new port hinterland provides useful insights for strategic improvement to accommodate the users' expectation. Further, the model offers both a descriptive and diagnostic strategic management tool for port hinterland development and operations, to guide future improvement.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.241-250
• /
• 2010

Over the past few decades, several studies have been made on the modeling of circular data. But these studies focused mainly on the symmetrical cases including von Mises distribution. Recently, many studies with skew-normal distribution have been conducted in the linear case. In this paper, we dealt the problem of fitting of non-symmetrical circular data with wrapped skew-normal distribution which can be derived by using the principle of wrapping. Wrapped skew-normal distribution is very flexible to asymmetical data as well as to symmetrical data. Multi-modal data are also fitted by using the mixture of wrapped skew-normal distributions. To estimate the parameters of mixture, we suggested the EM algorithm. Finally we verified the accuracy of the suggested algorithm through simulation studies. Application with real data is also considered.

• The Journal of the Korean dental association
• /
• v.54 no.3
• /
• pp.198-205
• /
• 2016

The purpose of this paper was to investigate the significance of splinted and non-splinted implant-supported restorations with an internal connection for multiple consecutively missing teeth. Upon examination of the effects of fixture-abutment connection, the distribution of occlusal load was favorable in splinted implant-prosthesis with an external connection, but effect of strain distribution was not significant in splinted implant-prosthesis with an internal connection. In splinted implant-prostheses for short implants, strain distribution was not affected by the method of retention. For cement-retained prostheses, the effect of strain distribution due to splinting was not significant. In clinical studies, non-splinted prostheses with an internal connection for multiple consecutively missing teeth showed high survival rate, mild marginal bone loss, and stable periodontal condition. However, failure to achieve optimal proximal contact between single-unit prostheses may lead to food impaction, and veneer fracture may be inevitable when the framework provides inadequate support in the proximal region. In conclusion, splinted implant-prosthesis is not an indication in all cases, and clinical consideration of its use should be based on the patient's oral condition, such as location and number of implants, formation of proximal contact, canine guidance, existence of parafunctional habit, and oral hygiene, when multiple consecutively missing teeth are replaced by internal connection type implant.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.540-546
• /
• 2013

Using the free volume of van der Waals equation, Carnahan-Starling equation for hard spheres, Wilson equation for nonrandom mixing of solution, NRTL equation and our equation, several new equations of states for pure gases are derived. Using these equations, compressibility factors for pure gases are calculated and compared with Nelson-Obert generalized compressibility factor charts. The equation of states using the concept of molecular nonrandom distribution gave better results than those of molecular random distribution. This shows that the molecular nonrandom distribution makes considerable effect on the equation of states.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.324-330
• /
• 2013

The main objective of this work is to experimentally investigate the effect of inlet geometries on the distribution of two-phase annular flow at header-channel junctions simulating the corresponding parts of compact heat exchangers. The cross-section of the header and the channels were fixed to $16mm{\times}16mm$ and $12mm{\times}1.8mm$, respectively. Experiments were performed for the mass flux and the mass quality ranges of $30{\sim}140kg/m^2s$ and 0.3~0.7, respectively. Air and water were used as the test fluids. Three different inlet geometries of the header were tested:no restriction (case A), a single 8 mm hole at the center (case B), and nine 2 mm holes around the center (case C) at the inlet, respectively. The tendencies of the two-phase flow distribution were different, in each case. For cases B and C (flow resistance exists), more uniform flow distribution results were seen, compared with case A(no flow resistance), due to the flow pattern change to mist flow from annular flow at the inlet, and the flow recirculation near the end plate of the header.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.1
• /
• pp.51-60
• /
• 2011

Purpose: The purpose of this study was to investigate hamstring length during static uprighting position using weight distribution ratio. Methods: Ninety-six volunteers(56 males) were participated. The active knee extension test(AKE) was measured 3 times on both legs. The mean score of AKE was obtained. Then, the measurement of weight distribution ratio was observed 3 times on both legs, and its mean value was also calculated. Subjects were divided four groups based on their hamstring length measurement; both hamstring shortening group, left hamstring shortening group, right hamstring shortening group and normal hamstring length group. One-way ANOVA was employed to analyse collected data. Pearson's correlation was also hired to see any relationship between the hamstring length and the weight distribution. Results: In anterior/left area and posterior/right area, both hamstring shortening group left hamstring shortening group were superior to right hamstring shortening group and normal hamstring length group. Significant difference was existed statistically(p<.05) between groups. The correlation analysis between hamstring length and weight distribution ratio has not been shown any significant findings(Pant/post=0.733, Plt/rt=0.135). Conclusion: The results of the study may be applied to therapeutic management in posture and movement skill in musculoskeletal physical therapy.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.7-14
• /
• 2008

The temperature distribution in a surface of diesel particulate filter(DPF) was measured using an infrared temperature camera. In order to regenerate the DPF, five partitioned electric heaters were used for heating the ceramic filter. The five partitioned heaters were switched on/off with some time interval one the other. The surface temperature distribution in the ceramic filter and electric heaters were measured with varying both the electrical power supply to the heaters and the mass flow rate of the air supply from a blower. The higher mass flow rate in the DPF system enhanced the uniformity in the surface temperature distribution of the ceramic filter due to effective convection heat transfer. The flow in the monolith ceramic structure of the DPF move mainly in the axial direction, which could be identified from the surface temperature of the ceramic filter.