• Advances in nano research
• /
• v.17 no.4
• /
• pp.323-334
• /
• 2024

This paper deals with the effect of non-linear volume fraction distribution of carbon nanotube in the FG-CNTRC beams on the critical buckling via a hyperbolic shear deformation theory. Here, different boundary condition was considered including hinged hinged, clamped clamped and clamped-free. Single-walled carbon nanotubes are aligned and distributed in the polymer matrix in different ways to reinforce it and the material properties of (CNTRC) beams are assumed to vary gradually along the thickness direction, following a new exponential power law distribution of (CNT). The effective material properties of nanocomposite beams are estimated using the rule of mixture. The governing equations of the mathematical models are obtained by applying Hamilton's principle. The results provided of mathematical models in this work are compared and validated with similar ones in the literature. The critical buckling loads of nanocomposite beams with different boundary conditions of linear and non-linear distribution of CNT volume fraction were obtained. The effects of several parameters, including the type of beam, the volume fraction of carbon nanotubes (CNTs), the exponent degree (n), and the aspect ratio, were investigated. The distribution non-linearity of CNT volume fraction in the beam has a significant impact on the mechanical properties, particularly in buckling behavior with different boundary conditions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.550-555
• /
• 2009

Distribution of orthodontic patients in pediatric dental clinics has increased recently. So it is worth to study about the present status of orthodontic patients in pediatric dental clinics. The purpose of this study was to recognize the characteristics and orthodontic patterns of orthodontic patients in pediatric dental clinics. The material consisted of distribution and orthodontic analysis records of 792 new patients in the department of pediatric dentistry, Seoul National University Dental Hospital, from 2006 to 2008. Results were as follows 1. In age distribution, 8-year-olds group comprised 22%, 7-year-olds 19%, 9-year-olds 16%, 10-year olds 15%, 11-year-olds 11%, and other age groups comprised 18%. 2. In skeletal patterns, skeletal class I patients comprised 52%, class II 29%, and class III 19%. 3. In vertical facial types mesofacial comprised 41%, brachyfacial 35%, and dolichofacial 24%. 4. Out of 792 patients 218 patients(28%) showed anterior cross-bite, and the occurrence ratio of anterior cross-bite increased as the age decreased.

• The korean journal of orthodontics
• /
• v.50 no.1
• /
• pp.33-41
• /
• 2020

Objective: To investigate the distribution and phenotypes of hemifacial microsomia (HFM) and its association with other anomalies. Methods: This study included 249 Korean patients with HFM, whose charts, photographs, radiographs, and/or computed tomography scans acquired during 1998-2018 were available from Seoul National University Hospital and Dental Hospital. Prevalence according to sex, side involvement, degree of mandibular deformity, compensatory growth of the mandibular body, and Angle's classification, and its association with other anomalies were statistically analyzed. Results: Prevalence was not different between male and female patients (55.0% vs. 45.0%, p > 0.05). Unilateral HFM (UHFM) was more prevalent than bilateral HFM (BHFM) (86.3% vs. 13.7%, p < 0.001). Although distribution of the Pruzansky-Kaban types differed significantly in patients with UHFM (I, 53.0%; IIa, 18.6%; IIb, 24.7%; III, 3.7%; p < 0.001), no difference was observed in occurrence between the right and left sides (52.6% vs. 47.4%, p > 0.05). Among patients with BHFM, prevalence of different Pruzansky-Kaban types on the right and left sides was greater than that of the same type on both sides (67.6% vs. 32.4%, p < 0.05). Despite hypoplasia of the condyle/ramus complex, compensatory growth of the mandibular body on the ipsilateral side occurred in 35 patients (14.1%). Class I and II molar relationships were more prevalent than Class III molar relationships (93.2% vs. 6.8%, p < 0.001). Forty-eight patients (19.3%) had other anomalies, with 50.0% and 14.4% in the BHFM and UHFM groups (p < 0.001). Conclusions: Patients with HFM require individualized diagnosis and treatment planning because of diverse phenotypes and associations with other anomalies.

• Journal of Environmental Health Sciences
• /
• v.50 no.1
• /
• pp.66-72
• /
• 2024

Background: Vibrio vulnificus is a serious opportunistic human pathogen that has a worldwide distribution in a variety of marine and estuarine environments. Objectives: For this reason, we investigated the distribution of Vibrio vulnificus in coastal areas of Gyeonggido Province from 2018 to 2022. Also, we analyzed the correlation between V. vulnificus leading to infection and two marine environmental factors (water temperature and salinity). Methods: We collected a total of 266 samples from six coastal area points (i.e., seawater, mudflats). Specimens were isolated using selective plating media and isolated strains were identified by a VITEK 2 system. To find the relevance of the isolation rates of V. vulnificus and number of cases of V. vulnificus infection, we summarized the data on 48 cases of V. vulnificus infection from the open data of the Korea Disease Control and Prevention Agency. Results: Among the 266 samples taken during the investigation period, 47 strains were isolated, and the separation rates of V. vulnificus were 17.7%. The monthly isolation rates of V. vulnificus were ranked in the order of August (53.8%), September (33.3%), June (28.6%), and July (21.1%). There was a positive correlation with the temperature of seawater, but salinity was not significant. The number of cases of V. vulnificus infection reported in Gyeonggi-do Province were 18 (37.5%) in September, 14 (29.2%) in August, and eight (16.7%) in October. The proportion was 83.3%. It was relevant to the isolation rates of V. vulnificus in the marine environmental sources. Conclusions: Our data showed that the number of V. vulnificus infection cases could be affected by changes in the distribution of V. vulnificus due to rise the temperature of seawater in the marine environment.

• The Korean Journal of Applied Statistics
• /
• v.22 no.2
• /
• pp.237-248
• /
• 2009

The probability of default on the credit evaluation study is represented as a linear combination of two distributions of default and non-default, and the distribution of the probability of default are generally known in most cases. Except the well-known Kolmogorov-Smirnov statistic for testing the identity of two distribution, Kuiper, Cramer-Von Mises, Anderson-Darling, and Watson test statistics are introduced in this work. Under the assumption that the population distribution is known, modified Cramer-Von Mises, Anderson-Darling, and Watson statistics are proposed. Based on score data generated from various probability density functions of the probability of default, the modified test statistics are discussed and compared.

• Wind and Structures
• /
• v.8 no.6
• /
• pp.443-454
• /
• 2005

Wind loading is very important, even dominant in some cases, to large-span single-layer reticulated shells. At present, usually equivalent static methods based on quasi-steady assumption, as the same as the wind-resistant design of low-rise buildings, are used in the structural design. However, it is not easy to estimate a suitable equivalent static wind load so that the effects of fluctuating component of wind on the structural behaviors, especially on structural stability, can be well considered. In this paper, the effects of fluctuating component of wind load on the stability of a single-layer reticulated spherical shell model are investigated based on wind pressure distribution measured simultaneously in the wind tunnel. Several methods used to estimate the equivalent static wind load distribution for equivalent static wind-resistant design are reviewed. A new simple method from the stability point of view is presented to estimate the most unfavorable wind load distribution considering the effects of fluctuating component on the stability of shells. Finally, with comparisive analyses using different methods, the efficiency of the presented method for wind-resistant analysis of single-layer reticulated shells is established.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.43-48
• /
• 2011

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The infinite failure non-homogeneous Poisson process models presented and propose an optimal release policies of the life distribution applied extreme distribution which used to find the minimum (or the maximum) of a number of samples of various distributions. In this paper, discuss optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement. In a numerical example, extreme value distribution as another alternative of existing the Poisson execution time model and the log power model can be verified using inter-failure time data.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.11
• /
• pp.559-566
• /
• 2015

The main objective of this work is to experimentally investigate the effect of angle variation on the distribution of two-phase flow at header-channel junctions. The cross-sections of the header and the channels were fixed at $16mm{\times}16mm$ and $12mm{\times}1.8mm$, respectively. Air and water were used as the test fluids. Four different header-channel positions were tested : Vertical header with Horizontal channels (case VM-HC), Horizontal header with Horizontal channels (case HM-HC), Horizontal header with Vertical Downward channels (case HM-VDC), and Horizontal header with Vertical Upward channels (case HM-VUC). In all cases, liquid flow distribution tended to decrease gradually in the upstream header region. However, in the downstream region, different trends could be seen. The reason for these different tendencies were identified by flow visualization in each case. The standard deviations for the liquid and gas flow distribution in each case were calculated, and the case of VM-HC had the lowest values compared to other cases because of the symmetrically distributed liquid film and strong flow recirculation near the end plate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.1
• /
• pp.55-65
• /
• 2006

The air and water flow distribution are experimentally studied for a round header - flat tube geometry simulating a parallel flow heat exchanger. The number of branch flat tube is thirty. The effects of tube outlet direction, tube protrusion depth as well as mass flux, and quality are investigated. The flow at the header inlet is identified as annular. For the downward flow configuration, the water flow distribution is significantly affected by the tube protrusion depth. For flush-mounted configuration, most of the water flows through frontal part of the header. As the protrusion depth increases, more water is forced to the rear part of the header. The effect of mass flux or quality is qualitatively the same as that of the protrusion depth. Increase of the mass flux or quality forces the water to rear part of the header. For the upward flow configuration, however, most of the water flows through rear part of the header. The protrusion depth, mass flux, or quality does not significantly alter the flow pattern. Possible explanations are provided based on the flow visualization results. Negligible difference on the water flow distribution was observed between the parallel and the reverse flow configuration.

• Transactions of Materials Processing
• /
• v.23 no.6
• /
• pp.369-375
• /
• 2014

Flexible roll forming allows profiles to have variable cross-sections. However, the profile may have some shape errors, such as, warping which is a major defect. The shape error is induced by geometrical deviations in both the concave zone and the convex zone. In the current study, flexible roll forming was modeled with FE simulations to analyze the shape error and the longitudinal strain distribution along the flange section over the profile. A distribution of analytically calculated longitudinal strains was used to develop relationships between the shape error and the longitudinal strain distribution as a function of the defined shape parameters for the profile. The FE simulations showed that the shape error is primarily affected by the deviations between the distribution of analytically calculated longitudinal strain and the longitudinal strain distribution of the profile. The results show that the shape error can be controlled by designing the shape parameters to control the geometrical deviations at the flange section in the transition zones.