• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.5
• /
• pp.269-278
• /
• 2013

In this study, in order to examine the applicability of computational fluid dynamics with the porous model to the analysis of APR+ (Advanced Power Reactor Plus) internal flow, simulation was conducted with the commercial multi-purpose computational fluid dynamics software, ANSYS CFX V.14. In addition, among the various reactor internals, the effect of flow skirt geometry on reactor internal flow was investigated. It was concluded that the porous model for some reactor internal structures could adequately predict the hydraulic characteristics inside the reactor in a qualitative manner. If sufficient computation resource is available, the predicted core inlet flow distribution is expected to be more accurate, by considering the real geometry of the internal structures, especially located in the upstream of the core inlet. Finally, depending on the shape of the flow skirt, the flow distribution was somewhat different locally. The standard deviation of the mass flow rate (${\sigma}$) for the original shape of flow skirt was smaller, than that for the modified shape of flow skirt. This means that the original shape of the flow skirt may give a more uniform distribution of mass flow rate at the core inlet plane, which may be more desirable for the core cooling.

• Advances in materials Research
• /
• v.8 no.2
• /
• pp.117-135
• /
• 2019

The lifetime of a gas turbine combustor is typically limited by the durability of its liner, the structure that encloses the high-temperature combustion products. The primary objective of the combustor thermal design process is to ensure that the liner temperatures do not exceed a maximum value set by material limits. Liner temperatures exceeding these limits hasten the onset of cracking which increase the frequency of unscheduled engine removals and cause the maintenance and repair costs of the engine to increase. Hot gas temperature prediction can be considered a preliminary step for combustor liner temperature prediction which can make a suitable view of combustion chamber conditions. In this study, the temperature distribution of ceramic panels for a V94.2 gas turbine combustor subjected to realistic operation conditions is presented using three-dimensional finite difference method. A simplified model of alumina ceramic is used to obtain the temperature distribution. The external thermal loads consist of convection and radiation heat transfers are considered that these loads are applied to flat segmented panel on hot side and forced convection cooling on the other side. First the temperatures of hot and cold sides of ceramic are calculated. Then, the thermal boundary conditions of all other ceramic sides are estimated by the field observations. Finally, the temperature distributions of ceramic panels for a V94.2 gas turbine combustor are computed by MATLAB software. The results show that the gas emissivity for diffusion mode is more than premix therefore the radiation heat flux and temperature will be more. The results of this work are validated by ANSYS and ABAQUS softwares. It is showed that there is a good agreement between all results.

• Composites Research
• /
• v.31 no.6
• /
• pp.429-434
• /
• 2018

We investigate strain transmissions of a surface bonded distributed optical fiber sensor considering strain variation according to positions. We first derive a strain transmission ratio depending on a wavelength of a strain distribution of the host structure from an analysis model. The strain transmission ratio is compared with numerical results obtained from the finite element method using ABAQUS. We find that the analytical results agree well with the numerical results. The strain transmission ratio is a function of a wavelength, i.e. the strain transmission ratio decreases (increases) as the wavelength of the host strain decreases (increases). Therefore, if an arbitrary strain distribution containing various wavelengths is given to a host structure, a distorted strain distribution will be observed in the distributed optical fiber sensor compare to that of the host structure, because each wavelength shows different strain transmission ratio. The strain transmission ratio derived in this study will be useful for accurately identifying the host strain distribution based on the signal of a distributed optical fiber sensor.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.1
• /
• pp.13-22
• /
• 2021

Objective : High precision and accuracy are expected in gamma knife radiosurgery treatment. Because of the requirement of clinically applying complex radiation and dose gradients together with a rapid radiation decline, a dedicated quality assurance program is required to maintain the radiation dosimetry and geometric accuracy and to reduce all associated risk factors. This study investigates the validity of Leksell Gamma plan (LGP)10.1.1 system of 5th generation Gamma Knife Perfexion as modified variable ellipsoid modeling technique (VEMT) method. Methods : To verify LGP10.1.1 system, we compare the treatment plan program system of the Gamma Knife Perfexion, that is, the LGP, with the calculated value of the proposed modified VEMT program. To verify a modified VEMT method, we compare the distributions of the dose of Gamma Knife Perfexion measured by Gafchromic EBT3 and EBT-XD films. For verification, the center of an 80 mm radius solid water phantom is placed in the center of all sectors positioned at 16 mm, 4 mm and 8 mm; that is, the dose distribution is similar to the method used in the x, y, and z directions by the VEMT. The dose distribution in the axial direction is compared and analyzed based on Full-Width-of-Half-Maximum (FWHM) evaluation. Results : The dose profile distribution was evaluated by FWHM, and it showed an average difference of 0.104 mm for the LGP value and 0.130 mm for the EBT-XD film. Conclusion : The modified VEMT yielded consistent results in the two processes. The use of the modified VEMT as a verification tool can enable the system to stably test and operate the Gamma Knife Perfexion treatment planning system.

• Journal of Sport and Applied Science
• /
• v.5 no.2
• /
• pp.23-29
• /
• 2021

Purpose: The purpose of the study is to review the current states of new sports imported from foreign countries and to discuss strategic insights for promoting new sports which has been invented in Korea. Research design, data, and methodology: This study employed the qualitative approach, in which reviewed a related literature. First, the study selected flying disc, sports stacking, and T-ball as sample cases. This is because these new sports were recognized the prominent sports frequently played in physical education classes in Korea. Second, the study reviewed prior studies in the field of distribution and marketing in order to determine the criteria of analysis and variables that frequently examined in distribution and marketing studies. Finally, the study confirmed such terminologies as research variables including new sport name, organization name, background of the invented sports, distributional channel, promotional activities and so forth. To collect data, the study search literature via academic search engine including DBpia, KISS, RISS, ScienceDirect, SAGE Journals, SpringerLink, and Taylor & Francis. Results: It was found that all of the imported new sports organized association and its nationwide branches to deliver their sprots to local schools and recreational markets. second, they targeted schools and sought to broaden their markets to recreational communities. Conclusions: In order to promote new sport invented in Korea, associations need to be systematically organized and mission should be clearly stated. In addition, creative methods for promotion need to be developed. Future directions were discussed.

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.1067-1079
• /
• 2021

The coastal water is a space where salmon (Oncorhynchus keta), critical energy-conveying mediator, stay to adapt to different environments while traveling between ocean and river ecosystems for spawning and growth. The mid-eastern coast of Korea (MECW) is the southern limit of salmon distributed in the North Pacific Ocean. Understanding the distribution and migration characteristics of salmon in the MECW is important for the prediction of changes in the amount and distribution of salmon related to changes in the future marine environment. We analyzed the relationship between the salmon migratory timing ascending the Wangpi river and change in vertical seawater temperature and tidal elevation. Overall results highlight that (1) Salmon began to ascend the river when the sea surface water temperature (SST) decreased below 20℃; (2) The number of salmon ascending the river increased when the temperature difference between the upper and lower layers decreased, but decreased when the temperature difference was higher than 5℃; (3) The number of salmon ascending the river peaked, when the SST was 18℃-19℃ and sea levels rose at high tide. This study provide important insight into predicting changes in the ecosystem energy circulation through climate change at its southern distribution limit.

• Journal of Korea Trade
• /
• v.24 no.4
• /
• pp.34-48
• /
• 2020

Purpose - The rapid rise of e-commerce enterprises has led to the development of the logistics industry. At the same time, some enterprises are motivated by the interests to start reducing costs and inputs, which on the contrary leads to low quality of service, thus reducing customer satisfaction. In recent years, vicious competition, violent express delivery and lack of professionalism in the logistics market have led to high annual customer complaint rate, which has resulted in the company losing many loyal customers, but also unable to obtain new customers. Therefore, to pay attention to and understand the psychological needs of customers and improve the quality of logistics distribution service has become a pressing problem for Every express company. Design/methodology - By analyzing the problems existing in logistics distribution of express companies, this paper explores various factors affecting customer satisfaction and takes consumer sentiment as a mediating variable. Through questionnaires to collect relevant data, put forward hypotheses for empirical analysis, use two different software including SPSS 21.0 and AMOS 21.0 to analyze the information, draw conclusions and make recommendations. Findings - According to the above research results, the reliability, convenience, efficiency, professional can have a positive impact on customer satisfaction through the mediating effect of their sentiment, convenience and professional on consumer sentiment and satisfaction are more significant. Originality/value - This paper the establishment of distribution service indicators related to customer satisfaction and empirical analysis can not only enrich and supplement the distribution service quality indicator system studied by the former, but also provide a theoretical basis for future research.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.5
• /
• pp.193-202
• /
• 2023

In this paper, a dynamic centrifuge model test was conducted on a 24.8-meter-deep excavation consisting of a 20 m sand layer and 4.8 m bedrock, classified as S3 by Korean seismic design code KDS 17 10 00. A braced excavation wall supports the hole. From the results, the mechanism of seismically induced earth pressure was investigated, and their distribution and loading points were analyzed. During earthquake loadings, active seismic earth pressure decreases from the at-rest earth pressure since the backfill laterally expands at the movement of the wall toward the active direction. Yet, the passive seismic earth pressure increases from the at-rest earth pressure since the backfill pushes to the wall and laterally compresses at it, moving toward a passive direction and returning to the initial position. The seismic earth pressure distribution shows a half-diamond distribution in the dense sand and a uniform distribution in loose sand. The loading point of dynamic thrust corresponding with seismic earth pressure is at the center of the soil backfill. The dynamic thrust increased differently depending on the backfill's relative density and input motion type. Still, in general, the dynamic thrust increased rapidly when the maximum horizontal displacement of the wall exceeded 0.05 H%.

• Journal of Environmental Science International
• /
• v.32 no.12
• /
• pp.915-923
• /
• 2023

The purpose of the study is to explore strategies to revitalize the distribution of landscaping plants in Gangwon State (hereinafter referred to as Gangwon-do). To understand the current distribution status and perception of landscape materials in Gangwon-do, a survey was conducted on producers and consumers focusing on cultivation area and method, cultivated species and quantity, purchase species and quantity, and purchase area. Producers often cultivated open land, and in the case of trees and shrubs, most of them cultivated <5 species. On the other hand, consumers preferred field cultivation products when purchasing trees and shrubs. Approximately 6-10 species of trees and shrubs were preferred for a single purchase, confirming an imbalance in the supply and demand of landscaping plants. In addition, both producers and consumers had a positive perception of landscape plant transactions in Gangwon-do; however, the dissatisfaction factors for producers included a small consumer base and difficulties for them in securing standards and quantities. Based on these results, it is necessary to establish a platform that can interconnect producers' landscape plant cultivation information with consumers' requirements to rejuvenate the landscape plant distribution market and enhance competitiveness in Gangwon-do. In addition, this platform is expected to have a positive impact on improving the quality of landscaping plants, setting reasonable prices, and increasing domestic demand in Gangwon-do by providing opportunities for cultivation, promotion, and marketing education through producer support projects.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.26 no.3
• /
• pp.45-52
• /
• 2024

In this study, we analyzed the working environment of wholesale market distribution workers and suggested policy directions for the maintenance, operation, and development of sustainable wholesale market functions in response to changes in agricultural product distribution environment and working environment. The results of the analysis showed that there is a large gap in the working environment between wholesale corporation workers and middle wholesalers, and overall, the level of satisfaction with the working environment was low. In order to maintain sustainable wholesale market functions in the future, various policies and support should be established to improve the working environment of wholesale market distribution workers. The directions are as follows. First, wholesale market corporations should expand support for improving working environments by introducing systems such as rotational work by investing a portion of their profits in expanding manpower in response to changes in agricultural product distribution environment and working environment. Some Corporation of Garak-dong Wholesale Market is making great efforts to improve the working environment by introducing a rotational work system by expanding the workforce of auctioneers and providing a practical 5-day work week. In addition, in the case of wholesalers, it is expected that most of them will have difficulty in increasing their workforce as they are small businesses. However, it is judged that consolidation of businesses among wholesalers can be an alternative to increasing their workforce through expanding their management scale.